Our fearless NCS, Kevin, wrote:

   I wandered into Home Depot this evening and
   purchased a bit of 14 guage wire. I will try to get a loop up for 160
   which should tune quite nicely for the higher bands. Now to get some
   ladder line from HRO this coming week and get it hooked up.

This prompts me to offer a hint for home-brewing ladder line from stuff readily 
available at Homely Depot - nice project for a rainy day.

First, buy a spool of 18 ga stranded copper wire.  When I bought mine about 
year and a half ago it was $14 for a 500 ft spool (given inflation, your 
results may vary), enough for mucho ladder lines, attic loop antennae, etc 
(it's a bit flimsy for outdoor dipoles under tension, but great for ladder line 
or attic antennas.

Next, buy some packs of electrical cable staples - these come in a variety of 
sizes (you want the ones designed to hold 3/4 inch cable. They consist of a 
plastic saddle that goes over the cable, plus two nails in holes that are about 
7/8 inch apart. The nails are easily pulled out with pliers (and as a side 
bonus you will end up with a good supply of little nails for hanging pictures 
or whatever) and the resulting hole is just right for easily threading the 18 
ga wire thru.

If you don't already have a hot-melt glue gun, buy one of these, too, and in 
any case buy some glue sticks to fuel it with.

Thread the 18 ga wire thru the holes in the staple saddles, give a little 
squirt with the hot-melt glue to hold it, and voila, you have your ladder line. 
It's what I'm using on my windom and has held up very well.

Credit goes to Mike K3MT for introducing this method to me.
73
Ray K2HYD




_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to