' [EMAIL PROTECTED]; 'Elecraft Reflector'
elecraft@mailman.qth.net
Sent: Tuesday, December 04, 2007 2:03 AM
Subject: RE: [Elecraft] linear amp shutdown (was ALC)
2 ALC has its problems and thus not always connected, but
everyone uses PTT which can be very easily disabled (allow
the rig to self
From: David Cutter G3UNA
I take your point entirely which is why I said
ALC is an analog signal for gradually reducing drive, which
might not be appropriate for shutdown.
Shutdown for me is for protection against gross overload and for this
another signal might be more appropriate. Since
- Original Message -
From: Geoffrey Mackenzie-Kennedy [EMAIL PROTECTED]
To: David Cutter [EMAIL PROTECTED]
Cc: Elecraft Discussion List elecraft@mailman.qth.net
Sent: Tuesday, December 04, 2007 12:46 PM
Subject: Re: [Elecraft] linear amp shutdown (was ALC)
From: David Cutter G3UNA
I take your
QSK as good as the TS-930 and TS-940.
73,
N2TK, Tony
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David Cutter
Sent: Tuesday, December 04, 2007 8:33 AM
To: Geoffrey Mackenzie-Kennedy
Cc: Elecraft Discussion List
Subject: Re: [Elecraft] linear amp
In my view there are 2 issues here:
1 in my view the amplifier should be self-protecting against overloads, eg
antenna fault (I am mindful of virtually any other equipment which must be
tested by law with overload conditions)
2 ALC has its problems and thus not always connected, but
David Cutter [EMAIL PROTECTED] wrote
on Monday, December 03, 2007 10:55 PM :
In my view there are 2 issues here:
1 in my view the amplifier should be self-protecting against overloads,
eg antenna fault (I am mindful of virtually any other equipment which must
be tested by law with
]
[mailto:[EMAIL PROTECTED] On Behalf Of David Cutter
Sent: Monday, December 03, 2007 5:55 PM
To: Elecraft Reflector
Subject: [Elecraft] linear amp shutdown (was ALC)
In my view there are 2 issues here:
1 in my view the amplifier should be self-protecting
against overloads, eg
7 matches
Mail list logo
