Oooops my bad! I misread this post and assumed it was for KX2. But I think my
solution will work with just about any radio.
Sent from my iPhone
...nr4c. bill
> On Sep 27, 2017, at 11:33 PM, Nr4c wrote:
>
> Use a good dummy load and set power to zero watts. Works with
Use a good dummy load and set power to zero watts. Works with KX3, KX2 should
be similar.
Sent from my iPhone
...nr4c. bill
> On Sep 25, 2017, at 2:44 PM, Steve-KI4EZL wrote:
>
> I don't use my K2 much and have forgotten some of the functions. My wife
> wants to
craft-boun...@mailman.qth.net] On Behalf Of Peter Eijlander
(PA0PJE)
Sent: Tuesday, September 26, 2017 4:06 PM
To: Reflector Elecraft
Subject: Re: [Elecraft] practicing CW on K2 without transmitting?
I glued a 6.3 mm jack to the base of my Ham-Key paddle and a common cathode
double Schottky diode, that ca
-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Peter Eijlander
(PA0PJE)
Sent: Tuesday, September 26, 2017 4:06 PM
To: Reflector Elecraft
Subject: Re: [Elecraft] practicing CW on K2 without transmitting?
I glued a 6.3 mm jack to the base of my Ham-
I glued a 6.3 mm jack to the base of my Ham-Key paddle and a common
cathode double Schottky diode, that can be found in nearly any old PC
power supply, to create a straight-key input and while glueing I made a
small DPDT switch to reverse the paddles for left hand operation...
I know that can
) <pa0...@xs4all.nl>
Sent: Tuesday, September 26, 2017 7:17 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] practicing CW on K2 without transmitting?
With the K2 powerknob fully CCW it still produces some 100 mW output as
it shows on the display... I made several QSO's with that setting.
The
With the K2 powerknob fully CCW it still produces some 100 mW output as
it shows on the display... I made several QSO's with that setting.
The TEST option Don W3FPR suggested is imho the best solution.
72,
Peter
Op 2017-09-25 om 20:52 schreef rich hurd WC3T:
Can you turn power to 0 watts
Steve,
There is the TEST MODE.
Set the K2 to CW mode and hold VOX to turn it ON/OFF. See page 100 in
the K2 manual.
The other way is to connect a dummy load and turn the power all the way
down.
73,
Don W3FPR
On 9/25/2017 2:44 PM, Steve-KI4EZL wrote:
I don't use my K2 much and have
Subject: [Elecraft] practicing CW on K2 without transmitting?
I don't use my K2 much and have forgotten some of the functions. My wife
wants to practice sending CW (CW Ops class), and I wanted to setup the K2
with a good key for her to use. The trouble is, my forgetfulness has won
this battle and I ca
Can you turn power to 0 watts the way you can on the KX3?That's how I
do it.
---
72,
Rich Hurd / WC3T / DMR: 3142737
PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer
for Scouting
Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid:
*FN20is*
I don't use my K2 much and have forgotten some of the functions. My wife
wants to practice sending CW (CW Ops class), and I wanted to setup the K2
with a good key for her to use. The trouble is, my forgetfulness has won
this battle and I cannot remember what to do on the K2 so that it will not
11 matches
Mail list logo