Hello,
Now the DVR are going out for the K3 I have a software request:
The K3 internal voice keyer can be programmed with the RS232 commands.
Is it possible to add those commands to Win-test?
This seems like a must to me. When I look at the number of K3s being
used by contesters, it would make a lot of people happy.
It would also be very nice if WinTest would finally also support
Elecraft's internal keyers (K2 and K3).
vy 73 de toby
<http://www.elecraft.com/manual/K3_Pgmrs_Ref_Rev_B16.pdf>, pages 9-10:
----------------------------------------------------------------------
KS (Keyer Speed; GET/SET)
SET/RSP format: KSnnn; where nnn is 008-050 (8-50 WPM).
----------------------------------------------------------------------
KY (CW or CW-to-DATA Keying from Text; GET/SET)
SET format: KY*[text]; where * is a BLANK (ASCII hex 0x20) and [text] is
0 to 24 characters. Basic RSP format: KYn; where n is 0 (CW text buffer
not full) or 1 (buffer full).
K2 Extended RSP format (K22): KYn; where n is 0 (buffer < 75% full), 1
(buffer > 75% full), or 2 (buffer completely empty AND transmit of
previous string is complete.
The following keyboard characters are mapped to CW "prosigns":
( KN
+ AR
= BT
% AS
* SK
! VE
In addition to these prosigns, four special characters can be inserted
anywhere in the KY command text:
<
Puts the K3 into TX TEST mode, until a '>' character is received
>
Returns the K3 to TX NORM mode
@
In CW mode, this character normally terminates any CW message (via KY or
manual send), emulating the K2. However, tapping ‘2’ in CONFIG:CW WGHT
changes [EMAIL PROTECTED] to a prosign: the ‘at’ sign as used in e-mail addresses.
This is the newest Morse Code character; it can be remembered as the
prosign ‘AC’ (as in “the At Character”).
^D
(EOT, ASCII 04) Quickly terminates transmission; use with CW-to-DATA.
----------------------------------------------------------------------
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
