For the small amount of SSB I operate I use the Kenwood MC-60
desk mic. Always get good audio reports.
Doug
W6JD
K2/100 #1626
-- Original message --
From: "Peter Zenker" <[EMAIL PROTECTED]>
> Fred,
> After lots of testing QRPproject is selling the Kenwood MC 43 as best
gt; Gesendet: Mittwoch, 12. April 2006 19:10
> An: Peter Zenker
> Cc: elecraft@mailman.qth.net
> Betreff: Re: AW: [Elecraft] Elecraft K2 Microphones?
>
> Peter Zenker writes
> >After lots of testing QRPproject is selling the Kenwood MC
> 43 as best
> >choice together
Zenker
> Cc: elecraft@mailman.qth.net
> Betreff: Re: AW: [Elecraft] Elecraft K2 Microphones?
>
> What are the P1 connections for the MC-43S microphone?
>
> Keith Hamilton, W8GX
>
>
>
>
> Peter Zenker wrote:
>
> > Fred,
> >After lots of testing Q
I picked up the MC-43S because because they jumper straight across, I used
computer jumpers and didn't connect the 5 volt.
It was easier than trying to come up with some header so I could use my Yaesu
microphones.
Joe N9JR
Keith Hamilton <[EMAIL PROTECTED]> wrote:
What are the P1 c
I sold my MH2 a while back as it seemed totally out of character with the K2
even with the Elecraft label. It was way too large, had PTT switch that took
a lot of pressure to operate, and had too stiff a coiled cord.
The K2 also allows for function buttons on the mic to switch VFOs. It would be
What are the P1 connections for the MC-43S microphone?
Keith Hamilton, W8GX
Peter Zenker wrote:
Fred,
After lots of testing QRPproject is selling the Kenwood MC 43 as best choice
together with the K2. It generates an excellent SSB signal, it´s size meets
the K2 look and it can be 1:1 connec
Peter Zenker writes
After lots of testing QRPproject is selling the Kenwood MC 43 as best choice
together with the K2. It generates an excellent SSB signal, it´s size meets
the K2 look and it can be 1:1 connected at the K2 Microphon port.
I agree with you, Peter. I have both the Elecraft MH2 a
Fred,
After lots of testing QRPproject is selling the Kenwood MC 43 as best choice
together with the K2. It generates an excellent SSB signal, it´s size meets
the K2 look and it can be 1:1 connected at the K2 Microphon port.
72/3 de Peter, DL2FI
www.qrpproject.de
>
8 matches
Mail list logo