My thanks to everyone who replied to my query about using a K2 with
WSJT FSK441 mode on 6 meters. It was very enlightening and informative.
Looks like I *will* be modifying the ssb OP1 filter to 2.4 or 2.6 KHz
bandwidth and see how I do after that. It works out that the
recommended filter
I tried on our 70 MHz band with my XV-70. The same goes for JT65 as used by
our beacons where I found the tuning very critical.
I thought nothing of this but maybe you have a point.
Some weeks later on, I tried decoding JT65 on 23cm via an Icom IC910 and it
worked fine. It may be the K2
Lenny,
You have the 2.1 kHz filter width installed, and when the BFOs are
properly adjusted, the high frequency corner of the passband will be
close to 2300 Hz.
Order the SSBCAPKT from Elecraft and change the SSB filter width to 2.4
kHz, or even 2.6 kHz.
While you are at it (if you have not
Lenny W2BVH wrote:
Has anyone on the list used WSJT FSK441 mode with a K2? If so I'd like
to hear about your experience.
Hello Lenny,
Yep I did and do! And I can tell you that it works fine. It's a bit late
here, so
PROTECTED] On Behalf Of AD6XY - Mike
Sent: Monday, March 03, 2008 22:41
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Anyone using WSJT with a K2?
I tried on our 70 MHz band with my XV-70. The same goes for JT65 as used by
our beacons where I found the tuning very critical.
I thought
: [Elecraft] Anyone using WSJT with a K2?
Lenny,
You have the 2.1 kHz filter width installed, and when the BFOs are
properly adjusted, the high frequency corner of the passband will be
close to 2300 Hz.
Order the SSBCAPKT from Elecraft and change the SSB filter width to 2.4
kHz, or even 2.6 kHz
you how to tune
in on your partner. From then on it should be OK.
73's, Evert PA2KW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of AD6XY - Mike
Sent: Monday, March 03, 2008 22:41
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Anyone using WSJT
7 matches
Mail list logo
