Ken, I found a problem on a new K1 board with the silk screen markings. Apparently the new ROHS compatible boards have solder pads that the silkscreening ink does not stick to, so some of the parts orientation that used to be present is now gone - and I do not believe the folks at Aptos are aware of this condition yet (they will know tomorrow!!).
The immediate solution is to look at the Parts Placement diagrams at the back of the manual. 73, Don W3FPR > -----Original Message----- > > I have just got my K2/100 and installing the various elements > etc. There are 2 diodes D1 & D2, page 15, D1 is situated at the > left top corner. Now I take it the black end is the cathode!! but > which way should it orientate on the board!! On the outline for > the diodes on the board, there are 2 internal marks, one is > vertical line, the other is a sort of half circle..ish. > > I hope this is a good enough explanations!! > > Thanks > > Ken..G0ORH > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.15.15/581 - Release Date: 12/9/2006 3:41 PM _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
