Hello Sverre!
I have read the postings on the problem of having to set the AF gain as
bands are changed with FSK and PSK31 modes, and I seem to recall that I have
seen a product that automates this...
Does anyone have a clue or a web-pointer to what this is?
PSK Meter, see
that's the PSKMeter .. I have one but I don't remember who I bought it from :)
... Google sez http://www.ssiserver.com/info/pskmeter/
de w1rt/John
On 9/27/05, Sverre Holm [EMAIL PROTECTED] wrote:
I have read the postings on the problem of having to set the AF gain as
bands are changed with
Am 27. Sep 2005, um 09:43:12 schrieb Lyle Johnson:
Hello Lyle,
I have read the postings on the problem of having to set the AF gain as
bands are changed with FSK and PSK31 modes, and I seem to recall that I
have
seen a product that automates this...
PSK Meter, see
-Original Message-
that's the PSKMeter .. I have one but I don't remember who I bought it from
:)
... Google sez http://www.ssiserver.com/info/pskmeter/
--
Yes, that's the one, I got several responses, the first after 12 minutes!
For $39.35 the audio level is
I wrote a Linux program for the PSKMeter, and AA6E re-wrote it with a
nice GUI, and I now use his. KF6VSG's site has some presentations on
what the firmware does, and what the PC software does, and I used those
and some email exchanges with George to write the Linux version.
The firmware
hi Aki - absolutely right - for contest situations, it is especially
useful to not have to worry about readjusting the radio when changing
bands. But even for casual operating, its nice to be able to set the
mode and go, without having to make adjustments.
This past weekend, I operated the
On Mon, 2005-09-26 at 14:33 -0700, Jeff Stai wrote:
you cannot zero the RIT by computer command
Sure you can. Use the RC command.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
At 02:45 PM 9/26/2005, Brian Mury wrote:
On Mon, 2005-09-26 at 14:33 -0700, Jeff Stai wrote:
you cannot zero the RIT by computer command
Sure you can. Use the RC command.
u - OK, so I downloaded the K2 programmers reference, which I have never
looked at. If I understand correctly, that
On Mon, 2005-09-26 at 16:52 -0700, Jeff Stai wrote:
But, the K2 uses the last control action, so if I send an RC it will
clear a pot command, but as soon as I touch the pot it will use the
current pot position worst case is the next needed position for
the RIT knob is on the other side of
At 05:25 PM 9/26/2005, Brian Mury wrote:
- something I could probably get used to...
You might find the white line on the knob to be of use - at least you
can see where the RIT will jump to when you touch the knob.
yeah, if I'm looking at the knob...! adding something tactile to the knob would
aki, ja1nlx, asked:
Is there anyone who know articles or ideas about K2 FSK mod ?
Most rigs today do not produce true FSK. That is, they don't shift the
carrier frequency. Instead, they operate in Single Sideband mode and an
external frequency shift keyer
Hi Ron and others,
As I very much like to do EME and MS on 144 MHz my RF-power there is higher
than average to say the least hi! So as to reduce chances for LFD etc, I
decided that I should use FSK CW. It had to be FSK without phasejumps, so
SSB-FSK was found to be not suitable.
At the time I
Dick PA2DW wrote:
...if the K2 could ever make real FSK, I would be very pleased! But it
would probably take a significant hardware modification and software
development for just a small group of people, so I guess that the developers
at Elecraft will probably think they have something better to
13 matches
Mail list logo
