-Original Message-
There is a little trick to driving the K2 that might not be
obvious...
FR0;FA0001410;
...
Depending on application, issuing K20;AI0;
Hi Dave,
Thanks for sharing your experience. I have tried this now by defining a new
Elecraft setup in BeaconSee. It
On Apr 5, 2006, at 1:06 PM, Sverre Holm wrote:
I wonder if the beep is a standard error message from the K2 when it
receives an incomprehensible command over the KIO2?
There's no beep in response to a garbled RS-232 command, Sverre. The K2
ignores incorrect commands and quickly recovers to
-Original Message-
I wonder if the beep is a standard error message from the
K2 when it receives an incomprehensible command over the KIO2?
There's no beep in response to a garbled RS-232 command, Sverre. The K2
ignores incorrect
commands and quickly recovers to process the next
Sverre
I used to run BeaconSee very successfully with my K2 and it's KIO2. It did
switch the K2 to the various frequencies without a problem. Note the following
from my post on the subject some time ago:
There is a little trick to driving the K2 that might not be obvious... if
you don't
4 matches
Mail list logo