> -----Original Message----- > > I wonder if the beep is a standard error message from the > > K2 when it receives an incomprehensible command over the KIO2? > > There's no beep in response to a garbled RS-232 command, Sverre. The K2 ignores incorrect > commands and quickly recovers to process the next one.
I found the source of the problem, and now BeaconSee does what it is supposed to do. It turned out that BeaconSee pulses the DTR line at the same time as it sends the frequency change command. As I use my K2 for occasional contesting, I had DTR connected to the PTT line for CW keying. Evidentally the K2 does not like a KIO2 input command at the same time as the PTT is keyed, but removing the PTT connection solved the problem. Thanks for input and ideas, 73 Sverre LA3ZA http://www.qslnet.de/la3za/ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com