Folks:
In Field Testing the (hopefully) soon-to-be-released K3 Assembly Manual
(I had to COMPLETELY disassemble my FT K3 and reassemble it from the manual),
I recall that the Front Panel (Cover) is received separately from the Front
Panel PC board ASSEMBLY.
So yes... you WILL have to assemble
That's right Tom. The front panel board comes separate from the panel
itself, but all the pushbutton switches are pre-installed on the board. It's
a matter of putting the right spacers in place, then mounting the board on
the front panel and adding the knobs. The nice VFO A bezel and LCD display
Fred:
At 10:40 09/05/2007, Fred (FL) wrote:
I've gotten used to the pretested pre-created PCB
and samo samo set of K3 parts and components and
PCB's and . in the K3 kit version.
I learned long time ago there are no dumb questions,
only poor souls who won't ask them.
I was hoping
Fred:
NEWS FLASH! Just got ANOTHER e-mail from Eric...
The K3 BPFs WILL be FULLY ALIGNED AND TESTED before they are shipped.
All other 'adjustments' will be performed under software control.
73,
Tom
At 10:40 09/05/2007, Fred (FL) wrote:
I've gotten used to the pretested pre-created PCB
The K3 BPFs WILL be FULLY ALIGNED AND TESTED before they are shipped.
Rats! I thought I could do some tinkering after all ... hi hi
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
5 matches
Mail list logo
