RE: [Elecraft] Split ops?

2008-07-05 Thread G4ILO
Bob Serwy wrote: Yes there is. I use it. 'k31;swt13;swt13;k30; OK. I mis-remembered the problem I had trying to get this to work. I'm sending SWT13;SWT13;UPB4;UPB4;SWH13; The two VFOs *are* being set to the same frequency and mode, and SPLIT is being engaged, but VFO B is not

RE: [Elecraft] Split ops?

2008-07-05 Thread Bob Serwy
. Bob Serwy - N9RS -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G4ILO Sent: Saturday, July 05, 2008 3:45 AM To: elecraft@mailman.qth.net Subject: RE: [Elecraft] Split ops? Bob Serwy wrote: Yes there is. I use it. 'k31;swt13;swt13;k30; OK. I

RE: [Elecraft] Split ops?

2008-07-05 Thread Bob Serwy
Subject: RE: [Elecraft] Split ops? Bob Serwy wrote: Yes there is. I use it. 'k31;swt13;swt13;k30; OK. I mis-remembered the problem I had trying to get this to work. I'm sending SWT13;SWT13;UPB4;UPB4;SWH13; The two VFOs *are* being set to the same frequency and mode, and SPLIT

RE: [Elecraft] Split ops?

2008-07-04 Thread Bud Semon N7CW
Hi Tom, You need to tap A=B twice to transfer all the parameters, freq, mode, etc. 73, Bud N7CW -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of TMorton Sent: Friday, July 04, 2008 8:56 AM To: elecraft@mailman.qth.net Subject: [Elecraft] Split ops?

Re: [Elecraft] Split ops?

2008-07-04 Thread Bob Cunnings
A second button press is now required to transfer the mode setting. According to the release notes for version MCU 1.87 / DSP 1.69: * A-B SWITCH: 1st tap copies frequency only; 2nd tap within 2 seconds copies mode and filter settings. Bob NW8L On Fri, Jul 4, 2008 at 9:56 AM, TMorton [EMAIL

Re: [Elecraft] Split ops?

2008-07-04 Thread Don Wilhelm
Tom, Several folks wanted it that way (for several reasons), so there was a recent change. One tap of the AB button changes only the frequency. Two taps will change the mode and other settings too. Look at the firmware release notes for further explanation. 73, Don W3FPR TMorton wrote:

Re: [Elecraft] Split ops?

2008-07-04 Thread Greg
Tap AB a second time right after the first tap. Then you will see AB ALL. 73 Greg AB7R - Original Message - From: TMorton [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Friday, July 04, 2008 8:56 AM Subject: [Elecraft] Split ops? When making the selection AB then holding

Re: [Elecraft] Split ops?

2008-07-04 Thread G4ILO
Don Wilhelm wrote: Several folks wanted it that way (for several reasons), so there was a recent change. One tap of the AB button changes only the frequency. Two taps will change the mode and other settings too. Look at the firmware release notes for further explanation.

RE: [Elecraft] Split ops?

2008-07-04 Thread Bob Serwy
Yes there is. I use it. 'k31;swt13;swt13;k30; Bob Serwy - N9RS -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G4ILO Sent: Friday, July 04, 2008 4:57 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Split ops? Don Wilhelm wrote: Several