Mike, What is the possibility that you forgot to install RFC8 (with the 80 meter 2 band board) or forgot to install the jumper if you did not order an 80 meter board? That would do it.
If that is not the problem, do you have voltage on the IN pin of U5 - should be almost your power supply voltage. 73, Don W3FPR > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Mike Geddes > Sent: Saturday, March 03, 2007 3:11 PM > To: elecraft@mailman.qth.net > Subject: [Elecraft] Yikes! K1 voltage problems > > > > Building my K1 and taking my time to do a good job. Voltage > checks on RF board part 1 are problematic: > > P1 pin 15 - .002 > P1 pin 16 - 13.51 > U3 pin 5 - .002 > U3 pin 6 - .002 > > Any suggestions? > > Thanks, > > Mike > N4JX > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.446 / Virus Database: 268.18.6/709 - Release Date: > 3/3/2007 8:12 AM > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.6/709 - Release Date: 3/3/2007 8:12 AM _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
