Carter: this may be a serial communications problem between the KX3 and
KXPA100. Just as a diagnostic step, try turning the amp on with its power
slide switch. It should stay on.
To avoid needing to use that slide switch all the time, there is a serial
command sent periodically from the
Carter,
Check/replug and check again the RJ45 plug on the back of the KXPA100.
It must be locked in place. You should hear a light click as it is
fully seated in its socket.
73,
Don W3FPR
On 8/12/2021 12:42 PM, Carter Craigie wrote:
My problems all started when I moved my Elecraft KX3,
Please keep us informed about what you learn. Ed Tanton N4XY Sent from my
T-Mobile 4G LTE Device
Original message From: Carter Craigie
Date: 8/12/21 12:50 PM (GMT-05:00) To: Elecraft List Members
Subject: [Elecraft] Help Needed for KPA100 Amplifier
My problems all started
Have you checked the voltage at the lower set of PowerPoles with the amp turned
on?
I've seen issues with bad PowerPole connectors in the past. Maybe something
happened to them in the move.
73
Lyn, W0LEN
-Original Message-
From: elecraft-boun...@mailman.qth.net
4 matches
Mail list logo
