My .sig at the bottom says it all. 73 Bill AE6JV
On 6/27/20 at 6:48 PM, k2...@kanafi.org (Phil Kane) wrote:
> Unfortunately I have found two standards for
> "zip cord" markings - white stripe on positive, and white stripe on
> negative. Your multi-meter is your friend.
: June 28, 2020 12:02 a.m.
To: elecraft@mailman.qth.net
Reply to: donw...@embarqmail.com
Subject: Re: [Elecraft] KX2 power cable polarity?
For Elecraft gear, the shell is always V- (ground).
Other gear may be different.
73,
Don W3FPR
On 6/27/2020 8:08 PM, Jim Brown wrote:
> On 6/27/2020 2:22
For Elecraft gear, the shell is always V- (ground).
Other gear may be different.
73,
Don W3FPR
On 6/27/2020 8:08 PM, Jim Brown wrote:
On 6/27/2020 2:22 PM, hawley, charles j jr wrote:
Measure which wire goes to the outside shell of the connector, that’s
ground.
Not always -- I have at least
On 6/27/2020 5:12 PM, Jay Rutherford wrote:
> You really need to check before connecting a power supply. My Tecsun PL600
> charger shows positive on the outside shell. Who ever dreamed that one up?!
Telephone industry standards have the negative 48V as the "hot" side.
73 de K2ASP - Phil Kane
All good info about different rigs having reverse polarities on the connector.
But this is about the cable for the KX2.
BTW, if you read page 5 of the KX2 manual, under power supply, the manual
states that the center pin is + and the striped wire is +. Checking the cable
with an ohmmeter is
You really need to check before connecting a power supply. My Tecsun PL600
charger shows positive on the outside shell. Who ever dreamed that one up?!
73
Jay K3BH
On Sat, Jun 27, 2020, at 20:08, Jim Brown wrote:
> On 6/27/2020 2:22 PM, hawley, charles j jr wrote:
> > Measure which wire goes to
On 6/27/2020 2:22 PM, hawley, charles j jr wrote:
Measure which wire goes to the outside shell of the connector, that’s ground.
Not always -- I have at least one consumer product and one piece of pro
test gear that has V+ to the outside of the connector.
73, Jim K9YC
On 6/27/2020 2:22 PM, hawley, charles j jr wrote:
> Measure which wire goes to the outside shell of the connector, that’s ground.
That's about the only way. Unfortunately I have found two standards for
"zip cord" markings - white stripe on positive, and white stripe on
negative. Your
Measure which wire goes to the outside shell of the connector, that’s ground.
Chuck Jack Hawley
KE9UW
Sent from my iPhone, cjack
> On Jun 27, 2020, at 9:51 AM, Doug Daniels wrote:
>
> Just opened the box on my new KX2, and am about to put powerpoles on the
> power cable. Since both sides
Ian Kahn writes:
> The side with the white stripes us the positive. I just did the same thing
> last night.
>
> 73 de,
>
> Ian, NV4C
>
> On Sat, Jun 27, 2020, 10:52 AM Doug Daniels wrote:
>
>> Just opened the box on my new KX2, and am about to put powerpoles on the
>> power cable. Since both
The side with the white stripes us the positive. I just did the same thing
last night.
73 de,
Ian, NV4C
On Sat, Jun 27, 2020, 10:52 AM Doug Daniels wrote:
> Just opened the box on my new KX2, and am about to put powerpoles on the
> power cable. Since both sides of the wire are black, which is
11 matches
Mail list logo