Edward R Cole wrote:
I didn't do a power calibration to set back the power so
wondering if there is anything negative from running the K3/10 above
12w? This really would be an advantage for driving the 20/300w amp
that I will be assembling. I don't expect full output with 16w drive
...I found that a setting of 12w
actually netted near 16w output 160-20m, but dropped to 8w on 10
6m
What Bird slug are you using? Remember that a calibrated BIRD is only
guarenteed to be +-5% for a full scale reading. If you are less than
full-scale, the accuracy can be much less.
mine maxes out at 0.5mw on 500kHz, as claimed, on an HP power meter/head
rated down to 100kHz
Dave
Message: 11
Date: Mon, 14 Jun 2010 22:47:16 -0800
From: Edward R Cole kl...@acsalaska.net
Subject: [Elecraft] Running the K3/10 at higher power
To: elecraft@mailman.qth.net
Message-ID:
3 matches
Mail list logo
