You can get the recommend K3 mic or headset settings for all Heil products
off the Heil Website.
Bill - W0BBI
--
View this message in context:
http://elecraft.365791.n2.nabble.com/feedback-in-K3-tp7561065p7561766.html
Sent from the Elecraft mailing list archive at Nabble.com.
Having the 1 setting so low will also make your signal mushy and hard to
understand. Remember, commercial broadcast quality will widen your signal and
make it difficult to understand in conditions where the atmospheric noise level
is above normal.
Amateur Radio Operator N5GE
ARRL Lifetime Member
On 8/14/2012 8:28 PM, Joe Subich, W4TV wrote:
Boost at the low frequencies is not only wasteful of transmit power,
Right on, Joe. There is NO good reason to transmit ANYTHING below 200
Hz from a ham station, simply because human speech contains no energy
below about 125 Hz, and frequencies
Make sure you do NOT have SP + PH set. If you do, the speaker and phones will
both be on.
The speaker must be off to avoid feedback if the monitor is on.
On 8/14/2012 7:54 PM, Scott Dunlavey wrote:
Hello agn... I cant figure what I have set wrong... I have set up the
eq on the K3 in transmit
I have set up the eq on the K3 in transmit the following way... 1=+12
2=+10 3=-1 4= -1 5= 0 6= -1 7=0 8 = +2
Boost at the low frequencies is not only wasteful of transmit power, it
will almost certainly guarantee feedback due to the closeness of the
headphones and microphone. Since there is
5 matches
Mail list logo