I heard Roger, K7SJ (NC) on 14.314 right at 1800z at S7 here in
Alaska. I waited to call him until he turned his antenna from the
east coast to the SW. It still took several calls to get thru all
the stronger stations to the south of him. He had to rotate north to
fully copy my signal. I
Hi Roger,
Was a real pleasure to contact u for the 1st time. (no directional antenna on
my side, only a 84m loop)
Apreciated the long chat with Brendan EI6IZ at the end of the net.
Will Call again 17:45Z next Sunday for qsp.
73's
Philippe A65BI
http://www.qrz.com/callsign/A65BI
Roger Stein
I tried to make that point 2 years ago:
http://www.eham.net/articles/19194
The article was unfinished and there is a follow up a few comments later.
Ignacy
--
View this message in context:
http://elecraft.365791.n2.nabble.com/External-Power-Supply-for-the-KPA-500-tp4931334p5029940.html
Sent
Oh My! My slip-upI went to college at Wash State Univ. There, the club
station was W7YHI operated that station a lot during my time there so
somehwere in my mind when I hear a YH I sure try to always attach a '7' to
it!! You call is now on a 'sticky-note' attached to the edge of the
Yes, the K3 is light and rugged. On the other hand, it doesn't run on a
built-in battery.
I did a light-weight one-person DXpedition to Bangladesh. Mains
power on St Martin's Island [on the Bay of Bengal]
was a generator which ran only a few hours per day. So, the built-in
battery of the K2
Hi there can anybody tell me the specific times and freq for the K3 net
EMILSE
KE7EOZ
_
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
-- Forwarded message --
From: Roger Stein burch.cr...@gmail.com
Date: Mon, May 10, 2010 at 9:13 AM
Subject: Re: [Elecraft] K3 NET INFO
To: Emilse Peraza eman...@hotmail.com
*Hi there can anybody tell me the specific times and freq for the K3 net
*
CW NET
1) Hail signs
Is there a specific name or part/item number for the grey shade of color used
on the K2 housing?? Can it be found at the hardware/paint store??
I thought I'd ask here first, then bother the folks at Elecraft if I didn't get
an answer.
Want to share this!
Philip LaMarche
LaMarche Enterprises, Inc
727-944-3226
727-937-8834 Fax
727-510-5038 Cell
www.w9dvm.com http://www.w9dvm.com/
K3 #1605
CCA 98-00827
CRA 1701
W9DVM
_
From: Gary Surrency [mailto:supp...@elecraft.com]
Sent: Monday, May 10, 2010 12:48
Elecraft part number E980100, touch-up paint for the K1 and K2.
http://www.elecraft.com/order_form_parts.htm#paint
Al N1AL
On Mon, 2010-05-10 at 09:14 -0700, edward kacura wrote:
Is there a specific name or part/item number for the grey shade of color used
on the K2 housing?? Can it be found
eric.manning at engr.uvic.ca said:Yes, the K3 is light and rugged. You're
half right - it's light.
John Harper AE5X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
You want rugged, buy a BC-312. I'll take light :-)
Grant/NQ5T
On May 10, 2010, at 12:38 PM, John Harper wrote:
eric.manning at engr.uvic.ca said:Yes, the K3 is light and rugged. You're
half right - it's light.
John Harper AE5X
I still have the BC-342 I started SWLing with in 1955.
--- On Mon, 5/10/10, Grant Youngman n...@tx.rr.com wrote:
You want rugged, buy a BC-312. I'll take light :-)
Grant/NQ5T
__
Elecraft mailing list
Home:
FOR SALE : MFJ 931 ARTIFICIAL GRND. LAKE NEW WITH BOX AND INSTRUCTIONS. $70.00
OR BEST REASONABLE OFFER. PRICE INCLDS SHIPPING (US ONLY).
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I just finished building a K3 (#4181) and have a question about using the
KAT3.
When I hit the ATU button with the KAT3 enabled, it does its thing for a
second or two and then flashes a SWR value on the display as expected. I
want to operate on 80m with a VERY limited choice of antennas.
My
Test...my posts are not making it through.
Greg Doughty
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Stan Gibbs wrote:
When I hit the ATU button with the KAT3 enabled, it does its thing
for a second or two and then flashes a SWR value on the display as
expected. I want to operate on 80m with a VERY limited choice of
antennas.
It shows you the best match it could obtain. With really
~
N2CQ QRP CONTEST CALENDAR
May 12- June 13, 2010
~
CWops Mini-CWT Test (CW) ... QRP Category
May 12, 1100z to 1200z and
May 12, 1900z to 2000z and
May 13, 0300z to 0400z
Rules:
Is the LCD backlight only held to the foam pad by that 1/8 strip?
Also, I am finding it difficult to soldr the anode cathode to the
jumper and resistor...any suggestions?
Thanks
Greg Doughty
Ki4bbl
__
Elecraft mailing list
Home:
Nearly five years after Ken first announced our intention to offer a PCB
based K2 un-module headers kit, as of today we are no longer offering this
popular aftermarket accessory. We will continue to offer our K2 Internal
Mic Adaptor (IMA) kit for another year or two, depending on how quickly our
Greg,
I assume you mean the 1/8 inch thick double adhesive strip - if so, the
answer is yes, that is what holds the backlight in place. Position it
properly on the first try because that double sided foam tape is
difficult to remove if you do it wrong - follow the instructions precisely.
In
I have recently been experimenting with AM on the low bands using the K3. The
addition of Sync AM RX makes such a difference!
I have noticed on AM TX, use of compression, at any level, causes some
distortion of the waveform at the zero crossing (when viewed on an
oscilloscope) - not really an
I would also like to point out that those interested in installing Gary
and Ken's K2 PCB parts kits can very easily create their own
un-modules on perf-board. Many of them consist of just a wire between
two pins of the header - the KNB2 un-module is the most complex because
it needs to be a
23 matches
Mail list logo
