Hi all:
A local friend brought this to my attention.
Seems he is trying to set Split on PSK31 using the radio built in PSK31
keyer/decoder and terminal via RS232. When he tries to set Split, the radio
tells him SPL N/A.
I tried this, and I can set Split to function normally in RTTY, both
Good day,
I'm working with the XV432, Flex 1500 and Henry 2004A Amp. The rig,
xvrtr and amp PTTs are sequenced. Hoping somebody might have been down
this path before and has a solution.
If I connect the transverter output to the amp (or different pieces of
open coax) and key the transverter,
SSB Net 14,307.0
George
AI4VZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
GM All Phil is up on 14.307
Mike WB6CLZ
-- Original Message --
From: Phillip Shepard ph...@riousa.com
To: elecraft@mailman.qth.net
Subject: [Elecraft] SSB net announcement
Date: Sat, 7 May 2011 17:53:29 -0700
The weekly Elecraft SSB net will meet tomorrow (5/8/11) at 1800Z on
If possible, a sanitized command usable by anyone to read/write the
memories would be a nice addition to the programming interface.
Pf
Wayne == Wayne Burdick n...@elecraft.com writes:
Wayne Mike, This is one of several commands used only for factory
Wayne test, configuration,
The new frequency (14.3035) was taken by an NEQP station in running mode. I
elected to start at 14.307 as the Ohana net finished about 1800Z. The
frequency was announced on the reflector and on 14.3035. Hopefully,
everybody found us. Conditions were so-so, but we had 25 participants over
a 20
FYI: A flaky orange color has always been the trade mark an (anonymous)
Japanese/Chinese manufacturer. I call it Japanese orange. I have cursed
them many times. 11uH would not be a standard value. (i.e. special order)
73
Fred
-Original Message-
From: elecraft-boun...@mailman.qth.net
Hi all,
AA Engineering's QRP Smart Charger has the option to be built using two
of the four charging rates: 0.250 A, 0.500 A, 0.750 A, and 1.00 A. I plan
to run my K2 using a KBT2 + Charger combo.
Which two charging rates would be suit this setup? My K2 has a number of
options and draws about
Yes, if you're using rig control to read the VFO and such, it's better to use
it for PTT control than to use the SignalLink's PTT.
Leigh/WA5ZNU
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-fldigi-problem-tp6341130p6342895.html
Sent from the Elecraft mailing list
I was experiencing the same issue and I solved it by unplugging the PTT line
from the Signalink and allowed the software to key the radio and it works
fine. I wonder if this is something that could be resolved with a software
change, although the solution is simple enough. Barney K3LA
--
View
Good Evening,
A pleasant day today. Chilly, with rain, but there were openings in
the clouds which let light blink through every so often. About one minute
of sun for every hour today. I received reports of temperatures ranging
from 96 degrees down to 60 degrees; none of which
To the list:
A few days back, I posted a detailed query under the above Subject
LIne. The gist of the problem was that the TX light on the K3 was
remaining on after the end of transmission.
As usual, it was the nut that held the wheel that had come loose.
I had both PTT (in
12 matches
Mail list logo
