The assembly manual has just been released, We can hope KX3 kits
will begin shipping.
I skimmed thru the assembly manual and does not look too difficult
after assembling a DEMI 432 MHz transverter and only 18-page, 84 step
manual and about 89 components which about 50+ were sm. It took me a
Thanks Don (W3FPR), Monty(K2DLJ) Ray (SM5XLP) for your helpful replies.
I have now studied the circuit diagram of the KPA100 and identified the
20/17M filter section you refer to.
This weekend I will try re-flowing the solder joints of the 5 capacitors
two toroids and will check continuity
Rebooting has already been tried - to no avail. I am sure it a problem
within my computer, however have never experienced it before. A search
gave the usual Microsoft run in circle answers. Nothing that helped.
Any ideas?
Bill W2BLC
--
IN GOD I TRUST (but, NOT a single politician)
I didn't order my kit till Jan 9th, :(
I bet kits ship out faster than factory builds. Hopefully they have been
stock piling kits while the manual was being refined. Maybe a couple
hundred will go out on the 18th!
--
View this message in context:
Both have now been sold pending payment. Thank you.
73,
Don W3FPR
On 5/16/2012 5:52 PM, Don Wilhelm wrote:
The KIO2 has been spoken for (pending payment)
The KNB2 is still available
73,
Don W3FPR
On 5/16/2012 5:26 PM, Don Wilhelm wrote:
Hello,
I have 2 K2 option kits for sale - bags
I went back this morning to the tracking list and the date of Dec 30th was
changed to Dec 28th. So whoever entered it went back and changed it to the
actual date. So I am guessing the wait for my Dec 31st order is likely still
much longer than I thought it was only a couple days ago.
Keith
I don't see this on the price list. I don't care about 80, but sure would
like to have 30.
Thx,
Joe
--
View this message in context:
http://elecraft.365791.n2.nabble.com/is-the-30m-only-option-still-available-tp7555981.html
Sent from the Elecraft mailing list archive at Nabble.com.
I don't see this on the price list. I don't care about 80, but sure would
like to have 30.
Thx,
Joe
--
View this message in context:
http://elecraft.365791.n2.nabble.com/is-the-30m-only-option-still-available-tp7555982.html
Sent from the Elecraft mailing list archive at Nabble.com.
Joe,
I am trying to figure out what you mean. You must be referring to one of the
kits with band options but your message does not say which one. I am guessing
the KX1. If so, the KX1 does have a 30 meter option I think.
73, phil, K7PEH
On May 17, 2012, at 6:23 AM, AF6NI wrote:
I don't
I used a digital VOM, one lead to the tip of the plug, the other to find
the zero resistance value at the exposed ends of the wire. I don't
remember which is which, but this test will tell you quite quickly and
easily.
Hope this helps.
73,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
Yes KX1 and this message is in the KX1 group. I guess if you are seeing the
post via email you wouldn't realize that. Sorry, will make certain I list
which rig next time.
--
View this message in context:
OK.
I assume by KX1 group you might be referring to Nabble. I never use Nabble.
Actually, I didn't think very many people did use Nabble but that may be my
ignorance.
73, phil
On May 17, 2012, at 7:28 AM, AF6NI wrote:
Yes KX1 and this message is in the KX1 group. I guess if you are
T-Mobile. America’s First Nationwide 4G Network
- Forwarded message -
From: bill NY9H n...@arrl.net
To: N3MSE John Rodgers n3...@arrl.org
Cc: aa...@windstream.net, Adam Quigg kb3...@comcast.net, Bill Chisholm
billchisho...@comcast.net, Bill Edgar N3LLR n3...@arrl.net, Bill Hill
W3WH
Test message
-- Original Message --
From: Joel Black joel.b.bl...@gmail.com
To: elecraft@mailman.qth.net elecraft@mailman.qth.net
Subject: [Elecraft] Slow Speed CW With My K3
Date: Wed, 16 May 2012 08:57:40 -0500
It's been around 15 years since I worked any CW and then it was
I also have experienced an inability to get this program to work. Roy W4WFB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I'm still getting used to my new P3. The original P3 firmware had the baud
rate bug, and when I changed to 01.16, all was well (K3 f/w 4.50).
I then loaded K3 f/w 4.51 for better AGC - and here's the confusion:
Under 4.50, I coulda' sworned that the P3 cursor for VFO B (violet) was
only displayed
Don’t have the kx3 yet but wondering where the RTC/charger plugs in at? Didn’t
see it mentioned anywhere in the manual. Also the 2m transverter where would
that fit?
John WT5Y
__
Elecraft mailing list
Home:
Well, the markers are very handy for measuring the difference between two
signals on the display. I have also found them handy for marking the
boundaries of a range of frequencies, like if a dx station is working 5 to
10 UP, I can mark the range with the markers and then look for the pileup in
On Thu, 2012-05-17 at 19:28 +, Ralph Parker wrote:
Under 4.50, I coulda' sworned that the P3 cursor for VFO B (violet) was
only displayed when the SUB rcvr was on (good, avoids clutter), but now
(4.51) it is displayed continuously.
You can enable/disable the VFO B cursor with the VFO B
You can enable/disable the VFO B cursor with the VFO B menu item.
Yeah, but then it's either always on or always off, neither of which I want.
And tnx for the hints on MKRA and MKRB.
Ralph, VE7XF
__
Elecraft mailing list
Home:
I have a bunch of the split ferrites with a hole to fit RG-213 coax on hand.
Got 2 turns through the hole and used 3 of them with complete elimination of
the noise.
Barry W2UP
.
Jim Brown-10 wrote
Don't wrap the cable with ferrites, WIND turns of the cable through a
ferrite core. #31 or
Hi Ralph,
The violet VFO B cursor is present whether the sub RX is on or off. As
another poster commented you can turn it off with a menu change. And I
suppose you could set a FN button up to do it if you prefer.
I also prefer fixed tune and rarely use tracking mode.
I don't use the markers.
If you turn the VFO B menu item OFF then the VFO B cursor is not displayed,
unless you
turn SPLIT on. In that case you DO get the cursor.
Is that what you want?
On 5/17/2012 2:16 PM, Mike K2MK wrote:
Hi Ralph,
The violet VFO B cursor is present whether the sub RX is on or off. As
another
Hi,
I have a nice KX-1 for sale
KXAT-1
KXPD-1
a few accessories.
If interested contact me offline.
b...@kalkwarf.com w7wo Lacey, Wa
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Oh...how do you move cursers with out tuning? Sorry if that's a dumb question
but I'm not near the book.
Sent from my iPad
On May 17, 2012, at 4:30 PM, Bill Conkling n...@widomaker.com wrote:
Well, the markers are very handy for measuring the difference between two
signals on the display.
If you turn the VFO B menu item OFF then the VFO B cursor is not displayed,
unless you turn SPLIT on. In that case you DO get the cursor.
Hmmm... Tnx, Vic, maybe that's what I was thinking of, although I thought
I remember the B cursor being violet, not red as in 'split'.
More details that are
12/27... I was in the middle of buying some transformers in Akihabara and
literally dropped everything to fill out my order with my iPhone while
standing at the register... :D
./ben
W6MCM
KX3 #109
On Tue, May 15, 2012 at 7:25 PM, wf8o mnar...@woh.rr.com wrote:
Just curious, when did you
Elecraft is in the North Hall, Booths 181, 182 183 and 184
Dave G. KK7SS
DN06ijRichland, WA
KX3 #0097
I am not old, just chronologically gifted
--
__
Elecraft mailing list
Home:
I wondered if Akihabara was the same as it was back in the early 70s.
It was a kit builder's paradise. Pick up a basket at one end of the
bazaar,
grab as many of each component as desired, and pay at the end.
No blister packs here!
72/73 de Jim - AD6CW
On 5/17/2012 6:25 PM, ~BG~ wrote:
When you activate the markers, the knob will move them. Let's be sure we're
talking apples and apples. The cursor is the wide band that indicates the
bandwidth. It is moved with the vfo a/b knob. The markers are accessed by
taping or holding the [Marker] button on the right edge of the p3 and
$200
Syd WB4W
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this
Hi!
I am selling my QRP radio, an external auto tuner, tuner interface cable
and 10A PS
Icom IC-703 Plus with INRAD 400 Hz filter. Excellent condition.
Tokyo HyPower HC-200AT auto tuner. Excellent condition.
Tokyo HyPower HTC-100/ICOM5 17 foot radio interface cable for Icom.
Excellent
32 matches
Mail list logo
