[Elecraft] KX2 Sold

My KX2 serial #1099 has been sold. Jim Bennett Folsom, CA K7TXA (ex W6JHB as of 1/22/2021) Being retired doesn't mean I'm not part of the work force - just that I'm not forced to work! __ Elecraft mailing list Home:

Re: [Elecraft] KX3 buzz if power up on transverter band

https://github.com/drewarnett/kx3-firmware-issues/issues/1#issuecomment-765750316 On Wed, Jan 13, 2021 at 4:05 AM Drew Arnett wrote: > > Elecraft reported that they were able to reproduce the problem before > the end of October. > > Haven't heard anything more, yet. > > On Sat, Sep 12, 2020 at

Re: [Elecraft] K3: CW characters sound very hard / short

What does he have for config/TX DLY? Try resetting it to default 008. High values of TX DLY cause light CW weight. Dave Hachadorian, K6LL Yuma, AZ -Original Message- From: dl2ki Sent: Thursday, January 21, 2021 11:22 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3: CW

Re: [Elecraft] KPA 1500 fan speed at turn off

I just keep it on until the temp dies down.  If I'm in a hurry to shut it off I turn the fans on manually to cool it faster. BillK3WJV On Thursday, January 21, 2021, 5:59:20 PM EST, Howard Sherer wrote: Wouldn't it be a good idea to keep the fan turned on in the KPA-1500 after you

[Elecraft] Test email...

Too quiet here... -- 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division, Technical Resources __ Elecraft mailing list Home:

Re: [Elecraft] a bit of geek humor

On 2021-01-21 15:22:-0800, Joe K2UF wrote: > By coincedense I have one for sale. > > I am going to need your SS# and a bank account # with user id and password. >If you reponse within the next ten minutes I will enclose the deed for a >beautiful bridge in brooklyn N.Y. > > (Sorry folks I

[Elecraft] K3: CW characters sound very hard / short

Hi, a friend tells me that the CW characters sound very hard / short on his K3 in the standard mode "CW QRQ = OFF". This makes the characters at higher speed ~50WPM vy hardly readable by the QSO partner. Experiments with "CW WGHT" do not lead to success. At higher speeds, my friend therefore

Re: [Elecraft] [K4] IF Out

The K4 doesn't have an IF, so it can't have an IF output! Did you mean the K4D, although, admittedly, it might use the same box? -- David Woolley On 21/01/2021 00:45, john wrote: The K4 does not appear to have an IF Out connector on the rear panel, like the K3. Can the XVTR IF Out be

[Elecraft] K3s For Sale

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

[Elecraft] P3 SVGA Option module

Looking for a P3 SVGA option module. Contact me if you have one for sale. W7SNR Bob Hughes b...@fctaz.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] REMOTE OPERATION

Hi Paul, You'll definitely be able to use the K4D on CW remotely. We're still working on some aspects of full remote control, and will post about our progress to the list periodically. 73, Wayne N6KR > On Jan 21, 2021, at 7:24 PM, Paul Kobetz wrote: > > Hello Elecraft folks or anyone who

[Elecraft] KXPA100 Mount Screws

There are 4 locations on the lower sides of the cover for mount screws. Anyone know the size? Not spec’d in the manual. Keeping Watch- shu Joe Shuman, NZ8P __ Elecraft mailing list Home:

[Elecraft] K4 RBN node

I wonder if it would be feasible for the K4 to be configured with the ability to run it as a node in the RBN network with just a push of a button. Then there could be perhaps hundreds more reverse beacon monitoring stations on the air at any given time... 73, Drew AF2Z

[Elecraft] FS: KX2 Serial #1990 With Built-In Tuner

OK - last call before I put this up on eBay (ughhh…) Selling my KX2 serial #01990 with built-in KXAT2 antenna tuner, Fred Cady KX2 book, right-angle BNC connector and power cable with Anderson Power Pole connectors. The KX2 and tuner work perfectly - no scratches or dents. Has never been used

Re: [Elecraft] KXPA100 Mount Screws

Joe, After several trips to a hardware store, I found that 10-32 screws fit my early unit (#425). I have two different pdf manuals that indicate 8-32 and 6-32 ?! YMMV. 73, Henry - K4TMC On Fri, Jan 22, 2021 at 12:06 PM Joseph Shuman via Elecraft < elecraft@mailman.qth.net> wrote: > There

[Elecraft] K4 QSK

I've had a chance to try the latest improvements to QSK on the field test K4. It's great, close to the theoretical optimum of sounding like a code practice oscillator running in the background! Remarkably, it sounds the same in TEST mode as when transmitting 100W barefoot, 1200W (ICOM 1000 vacuum