I tried reloading the firmware and that didn't work so I did a full system
reset on the K3. I re-entered my filters, options, and setting then performed a
power calibration but not a synthesizer. It seems to be working again.
It's just odd that it only seemed to be in that specific range.
73
Bill,
I have two KDVR s and do not find the problem you describe.
I made recordings with the Mic gain at zero both with and
without a Mic connected. Without the Mic. I recorded with the
Mic Gain all the way up to 60 and still dead quiet.
My Mic input is set to the Front Panel.
Whatever it is,
The mod kit has been spoken for.
Message: 18
Date: Sun, 21 Jun 2015 23:40:39 +
From: Dauer, Edward eda...@law.du.edu
To: elecraft@mailman.qth.net elecraft@mailman.qth.net
Subject: [Elecraft] K3 Audio Protection Mod Kit
Message-ID: d1aca6cd.106ae%eda...@law.du.edu
Content-Type: text/plain;
I just went thought this process and the new KRX3 comes with the new synth. I
had to pick up a new synth to replace the old one in the main receiver as they
have to match.
It only took 12 hours to do it all including redoing the filters in the
receiver because I did not read the manual close
Hi Gang,
I finally got to use the KXV3B module on the 6m band today (22Jun15) as it
finally opened for DX from EU.
When the band first opened up around 12Z or so, I only heard a couple of
weak EU stns while others north of me were working them. One ham 10 miles
from me, as the crow flies,
The Elecraft mic has been sold.
Cary, K4TM
Sent from Clovelly Cottage, home of amateur radio station K4TM and the most
creative Sue Cary, with my iPhone 6 in Lynchburg VA - a great place to live,
work, play, and retire!
__
Elecraft
Jack,
Don't overlook the microphone - PTT switch engaged will cause that same
message.
So unplug everything except the power cord and antenna coax. If it
then powers on without the message, plug things in one at a time. When
you get the error, look at the last thing plugged in.
73,
Don
(1) SignaLink USB Sound Card Interface w/ K3 connecting cables/instructions..
New it's $119.95; yours for $65 w/ shipping Conus included.
Contact off list: h3c...@gmail.com
434- 660-8299 cell
H. Cary, K4TM
Lynchburg VA
(2) Heil desk mic w/ Elecraft name on mic face; black and chrome base.
8-pin
First problem with my K3 in five years. I have no MENU or CONFIG display.
NADA... I have an ERR KEY display.
I reloaded the latest Software via the K3 utility program, including the
DSP. I did not see anything wrong in the CONFIGURATION file.
The utiliuty program says the down load was
Mine is #24, and was a kit. I paid the 50% deposit and that was right
around $750. I bought only the K3/10 base unit with a single roofing
filter on the first purchase.
73,
matt W6NIA
On Mon, 22 Jun 2015 17:35:12 -0400, you wrote:
I'm unable to find my invoice for my early K3-10 #1210. Anyone
ERR KEY means the key jack (or paddle?) is closed as start-up.
Note, that can also mean the DTR or RTS line on the RS-232 port
is being held high if you have CONFIG:CW-PTT set to anything
other than OFF-OFF.
73,
... Joe, W4TV
On 2015-06-22 4:42 PM, Jack West wrote:
First problem with my
Jack - I get that message if I have my straight key depressed upon power up.
Check your key / paddle connections
jim / W6JHB
On Monday, Jun 22, 2015, at Monday, 1:42 PM, Jack West
w7l...@embarqmail.com wrote:
First problem with my K3 in five years. I have no MENU or CONFIG
When the bands are open, you can work DX with QRP RTTY, though of course the
S/N isn't as good as with CW. One field day I made about a dozen RTTY contacts
in half an hour using FSK-D mode and 5 W. I had a long random wire up in a tree
(probably 80' or so), plus a few radials.
Wayne
N6KR
On
On Mon, Jun 22, 2015 at 1:52 PM, Bill Frantz fra...@pwpconsult.com wrote:
Has anyone had success in QRP RTTY operation? Should I consider RTTY a
mode only suitable for higher power?
hi Bill - I write the results article in QST for the RTTY Roundup. Several
people who operated in the Roundup
I'm unable to find my invoice for my early K3-10 #1210. Anyone recall the
pricing for a base unit of that vintage?
thanks
jim ab3cv
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Jim,
My recall is not perfect, but I do think it was just under $1000 with no
options - and I don't remember if that was for the kit or Factory, but I
rather believe it was for the kit.
73,
Don W3FPR
On 6/22/2015 5:35 PM, Jim Miller wrote:
I'm unable to find my invoice for my early K3-10
I'm looking at the Wayback Machine for August 10 2008:
https://web.archive.org/web/20070810154421/http://www.elecraft.com/
It says a basic K3/10 cost $1399.95 and a K3/100 was $1849.95.
Alan N1AL
On 06/22/2015 02:48 PM, Matt Zilmer wrote:
Mine is #24, and was a kit. I paid the 50% deposit
Because it can be programmed to adhere to several country limitations, I
am certain that is *possible*, but that is not a user programmable
feature, and requires a substantial effort on the part of the Elecraft
staff to provide such limits. So I doubt that it would be done for US
customers.
They also change from time to time.
It always was your responsibility to make sure you were transmitting
within the ham band. I know it was my responsibility because I still
have the Pink Slip taped to the back of one of my log pages from that
era, more than one stage of my HB transmitter
Thanks all. I remembered the internet wayback machine and found the pricing
there.
pretty amazing resource!
73
jim ab3cv
On Mon, Jun 22, 2015 at 5:35 PM, Jim Miller j...@jtmiller.com wrote:
I'm unable to find my invoice for my early K3-10 #1210. Anyone recall the
pricing for a base unit of
Thanks, but that is the problemi have NO Config or Menu to display
73 de
Jack / W7LD / Lucky Dog
- Original Message -
From: Dave Hachadorian k6ll.d...@gmail.com
To: Reflector Elecraft elecraft@mailman.qth.net
Sent: Monday, June 22, 2015 2:07 PM
Subject: Re: [Elecraft] NEED K3
Thanks Guys,
Found it! It was as you saiddumb me.
73 de
Jack / W7LD / Lucky Dog
- Original Message -
From: Jack West w7l...@embarqmail.com
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Monday, June 22, 2015 1:42 PM
Subject: [Elecraft] NEED K3 HELP
First problem with
Greetings Phil
I am sorry to hear that you are leaving NCS. Over the years you have
done a fine job.
I have not checked in as often I would have liked because I have a
conflict with church.
I wish you good luck with the Parkinson's. My mother had it, and it is
not a nice disease, if any
I'm confused. I was with Harlan, that a config file from another serial number
wouldn't load. Has something changed with the K3S? How about K3 to K3?
73, Mike NF4L
On Jun 21, 2015, at 2:56 PM, Wayne Burdick n...@elecraft.com wrote:
Yes. However, on restore of the configuration file to the
Last year during field day, I made 186 PSK contacts and 1 RTTY
contact running QRP. I tried for many more RTTY contacts, but in
all but one case, the other station could not hear me. The one
exception was on 10 meters with a station across San Francisco
bay from our operation and probably line
What the other guys said, in different words:
Turn off the K3.
Unplug the DB-9 on the back of the K3, also unplug the key and
paddle.
Turn on the K3, and go to config PTT - KEY. Make sure it says
OFF - OFF.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Jack West
Wondering if initial shipments of the new K3S have begun? If not, please
advise the target date?
73,
Dick- K9OM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I have worked FT5ZM in 21RTTY with KX3 5W from JA. Of course, pileup was very
light then.
When condition is very good and noise level is low at the other location, QRP
RTTY is very possible.
73 de JH3SIF, Keith
2015/06/23 5:52、Bill Frantz fra...@pwpconsult.com のメール：
Last year during field
It wouldn't be a good idea to depend on the transceiver. If you are
operating USB, for example, you have to keep the (suppressed) carrier
frequency several kHz below the top of the band so your sideband will be
inside it; same for LSB and the bottom of the band. Even in CW there is
a
My concerns are a bit different. While I like having the radio
keep me honest, and as an extra class licensee, I'm in good
shape with the current radio firmware, I worry about
emergencies. The FCC allows us to work out of band during
emergencies, but I can't move to a public agency frequency
Hi folks,
after three weeks not using my K3 (Antenna disconnected, power off) I observed
a very strange thing:
When turning the bandwith down to 500Hz, the loudspeaker goes deaf despite
separate 250Hz and 500Hz filters installed!
This happens only to the main receiver, the sub receiver
Wanted to check with the group to see if anyone else has had a similar
situation where they hear a crackling nose in the the background when
recording a voice message using the KDVR3. I only recently started to use the
module for voice recording and noticed the noise immediately.
Key points to
As long as you buy a new KRX3-A I guess it would come with a KSYN3A.
73, Yngvi TF3Y
On Mon, Jun 22, 2015 at 12:59 AM, Russ mundschen...@msn.com wrote:
All:
For those of you who don't read instructions like me - remember to
download and install the latest K3 utility before uploading the new
33 matches
Mail list logo
