Re: [Elecraft] (no subject)

Richard, Those are two totally different things. The P3 display will show you the PSK or RTTY internal decode on the P3 display, and you can send RTTY or PSK from the K3 paddles by keying CW characters. With the SVGA option for the P3, you can use a keyboard to send those characters. Using

Re: [Elecraft] Feature request: Command line firmware updater

If the firmware update commands were documented, I would already have done so, but they don't appear to be. I assume they are the "reserved" commands listed in the programmers references. On Sun, Mar 27, 2016, 18:58 Phil Wheeler wrote: > But perhaps you could write your own

Re: [Elecraft] Feature request: Command line firmware updater

But perhaps you could write your own updating utility, Bruce. While I have an RPi2 running Linux, etc. I'm very happy with the OS-dependent utilities we have now. Likely a command line utility would not be as capable and could cause problems if the command line was not just so. 73, Phil

Re: [Elecraft] Elecraft CW Net Report for March 27/28, 2016

That did not format as I had intended. This should be easier to read: showing spots for DX call -- KD5ONS search spot by callsign de dx freq cq/dx snr speed time NO1D KD5ONS 7045.0CW CQ12 dB21 wpm0117z 28 Mar AK7V KD5ONS 7045.1

[Elecraft] Elecraft CW Net Report for March 27/28, 2016

Good Evening, I was able to raise a decent antenna this week and ran both Sunday nets. I worked: W0CZ - Ken - ND K4JPN - Steve - GA On the twenty meter net at 14049.5 kHz. And: NO8V - John - MI K0DTJ - Brian - CA K6PJV - Dale - CA W0CZ - Ken - ND W6JHB - Jim - CA I checked the Reverse

[Elecraft] (no subject)

Hi, I am new to the list.  I have a K3S which I use Fldigi with.  I am thinking of getting the P3.  Is it better than Fidigi, what are the differences Thanks, Dick N5XRD __ Elecraft mailing list Home:

[Elecraft] Feature request: Command line firmware updater

Hi folks, As the subject suggests, I'd like to put in a feature request, for a simple, command line firmware updater tool, for all applicable Elecraft rigs. To update the firmware on my KX3 and PX3, I need to download and set up two separate programs, most of whose functionality I won't ever

Re: [Elecraft] [K2] KPA100 Temp Cal: Room temp or radio temp?

Mike, First, the menu CAL TPA parameter will indicate the temperature of the heatsink if all is working normally. That is why you let the heatsink cool to ambient temperature before setting CAL TPA. If you have a temperature probe that can measure the heatsink temperature at the PA

Re: [Elecraft] [K2] KPA100 Temp Cal: Room temp or radio temp?

I have a related question: I purchased my K2/100 only a month ago, second hand, SN 5818. I've experienced "PA HOT" shut down on several occasions when running 100Watts out, and less frequently but it has happened when at 50Watts. I've witnessed the discussion of setting Cal tPa to ambient temp.

[Elecraft] Elecraft CW Net Announcement

Good Day, After a month filled with antenna part delays and bad weather I finally have replaced my antenna. I hope to put up a few more soon. Luckily it started to hail as I was hoisting the center line. For the next twenty minutes the ice kept falling as I wove the legs of the doublet

[Elecraft] Test...

. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: