[Elecraft] Elecraft at QuartzFest

I've been tapped to host an "Elecraft Group" meeting Monday evening, 23 Jan, at 6:30 p.m., at QuartzFest Area 3. If you plan to attend, Elecraft owner or not, I would like to hear from you. I hope both current owners and prospective owners participate. Let me know what you might like to

Re: [Elecraft] Macro for text decode

You're Welcome I've been writing a lot of macros lately, since I have a K-Pod and a Genovetion CPS48 Keypad It just so happened that I was working on that same issue, So in truth you inspired me to fix my Macro. From: VE3WDM To: elecraft@mailman.qth.net Sent:

Re: [Elecraft] SWR on 40 meters

Mike is checking it out, but there's an 8.2 MHz trap on the ATU board, or on the KAT3 if you have no ATU. It's the prime suspect. Scott K9MA On 1/4/2017 17:40, Jim Spaulding wrote: Mike and Jim I am having the same problem on 40 M only with one of two K3s. Both have new synth boards and

Re: [Elecraft] Audio artifacts in DATA A mode with KX3

Nick, Help me here I don't see any connection. You could still be crazy and experiencing the Audio Artifacts as well. :) -- Thanks Jon KG6VDW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] Macro for text decode

I would like to thank you all for the input and it was very interesting seeing the solution come together as I read the posts. Thanks to all of you for your time 73, Mike VE3WDM -- View this message in context:

Re: [Elecraft] SWR on 40 meters

Mike and Jim I am having the same problem on 40 M only with one of two K3s. Both have new synth boards and antenna tuners bypassed. Jim W0UO On 1/4/2017 4:21 PM, elecraft-requ...@mailman.qth.net wrote: Send Elecraft mailing list submissions to elecraft@mailman.qth.net To subscribe

Re: [Elecraft] SWR on 40 meters

On Tue,1/3/2017 9:34 PM, Mike Wetzel wrote: Any ideas Bad coax or bad coax shield connection? 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] K3 Monitor function

Thanks Tony and the others who replied. That fixed it - I perhaps did not turn the control all the way to zero (0) before. No monitor audio in my headset now with control set to aero. Edd __ Elecraft mailing list Home:

Re: [Elecraft] Audio artifacts in DATA A mode with KX3

I've noticed the same kind of issue at times, also. I've never known to what to attribute it to. To be far, it's not just Elecraft rigs. I think it may be software glitches rather than transceiver problems. 73, Carl Sent from my iPhone === Carl Jón Denbow, N8VZ 17

Re: [Elecraft] K3 Monitor function

Hi Edward, To change the monitor volume press the CMP PWR knob and you should hear the tone. Adjusting the same knob up and down as required, in my case setting it to zero makes the tone inaudible in both the speakers and the headphones. Just for ref the AF-Sub knob is unaffected and

[Elecraft] K3 Monitor function

Good morning. How do I turn OFF the K3 Monitor function? Reducing the volume to zero (0) does not remove the audio from my headset. I can find how to set it up and change the volume (p. 28 K3s manual) but not how to turn it off. Thanks! Edd KD5M

Re: [Elecraft] Macro for text decode

I think the UPB and DNB are still on the list for the KX3. From: Elecraft on behalf of Tom Sent: Tuesday, January 3, 2017 10:07 PM To: donw...@embarqmail.com; Harry Yingst; Mike Weir;