Re: [Elecraft] K-Pod Power from data port for k3s serial 10511

Hello, Thanks to all for the support. I will use a resistor between 5 and 10 ohm. Best regards, Graziano iw2noy ⁣Inviato da BlueMail ​ Il giorno 9 feb 2018, 00:43, alle ore 00:43, "hawley, charles j jr" ha scritto: >The resistor is in series from a 5 vdc source. The

[Elecraft] T1 QRP Autotuner

I just finally completed building my T1 tuner kit. It's been hanging around unbuilt for years! It went together really nicely. Soldering the relays was a bit tricky, but everything went okay and it worked perfectly first time. I have to say it's a marvelous but of kit. Extremely well

Re: [Elecraft] New KAT500/KPA500 setup and utility software problems

Are you running the Kat 500 in the manual mode? Ed AB4IQ Sent from my Verizon Motorola Droid On Feb 9, 2018 7:26 PM, Steve Wilson via Elecraft wrote: > > Hi there, > I'm assisting my godfather with setting up a new KAT500 & KPA500 to add to > his K3/P3. > Issues I am

[Elecraft] New KAT500/KPA500 setup and utility software problems

Is the KAT set to manual or auto tune? They are noisy while tuning, be sure to follow the manual's procedure. I have never used the KPA utility, can't you disable Norton to download it? John KK9A Steve Wilson Wrote: Hi there, I'm assisting my godfather with setting up a new KAT500 & KPA500 to

[Elecraft] Things to do while waiting for your call for the KPA1500

Today I installed the HAMPLUS antenna switch on my K-Line. It can select from 6 antennas and 3 radios. It will allow for more than 2 antennas on the KPA1500. The switch seems very fast and silent as it switches. The AS-603A can also be controlled by the radio (not tested). Once the new 1500

[Elecraft] New KAT500/KPA500 setup and utility software problems

Hi there, I'm assisting my godfather with setting up a new KAT500 & KPA500 to add to his K3/P3. Issues I am having: 1) KAT500 makes quite a racket whenever keying up. It seems to settle down, but as soon as I speak, it freaks out again. He has two antennas...a hex beam on ant 1 and a G5RV on

[Elecraft] KPA1500 invoice

Ordered 8/24. Invoice received just now, 7 P.M. EST Carl Yaffey K8NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

Re: [Elecraft] KX2 Nylon pull-loop for battery plug

These are our own design and are made custom for us fro use on the KX2. 73, Eric /elecraft.com/ On 2/9/2018 1:42 PM, Heinz Baertschi wrote: Does anyone know a supplier for the nylon pull-loops on the battery plug - at a reasonable (total) price? Heinz HB9BCB -- Sent from:

[Elecraft] KX2 Nylon pull-loop for battery plug

Does anyone know a supplier for the nylon pull-loops on the battery plug - at a reasonable (total) price? Heinz HB9BCB -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home:

Re: [Elecraft] New release of Win4K3Suite

Is your software supported on Linux? If not, do you have plans to make same available for Linux? Bill W2BLC K-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] New release of Win4K3Suite

Hello, There is a new release of Win4K3Suite. This release corrects an error with a missing DLL when a SDRPlay RSP1A is used and improves the RIT/XIT function. One of the useful features of Win4K3Suite is that it interfaces to all 3rd party logging and digital mode programs such as

[Elecraft] OT: A decent HR piece on NBC

Just spotted this on the NBC website. It’s about ECOM and not specific to Elecraft (except for all the battery powered radios), but one of the few decent pieces I’ve seen ... https://www.youtube.com/watch?v=dO09aMGMizM=youtu.be Grant

Re: [Elecraft] Easier way to adjust KPA500 fan speed

I keep mine always set on the highest speed that is not loud. I cannot remember the number but it the fan is barely noticeable and the next speed up seems quite loud. For casual S operating the loud fan never comes on for me. John KK9A From: Brian K3KO Date: Fri Feb 9 11:57:29 EST 2018 With the

[Elecraft] P3 Macros - MEM to MEM Copy? MEM Editing?

Has anyone come up with a reasonable means to duplicate a Stored Macro in the P3/SVGA? I am interested in loading 48 memories with Macros that are all over 100-characters and many of them are very similar with just a few characters different.  Because you need to type every one, this is

[Elecraft] Easier way to adjust KPA500 fan speed

With the lack of sunspots, one has to scrounge for QSO's. For a non big gun station, that means a lot of S and pouncing on DX cluster spots. Lots of hopping between modes. I use earphones always but still find it necessary to tinker with fan speed. Keeping ambient KPA500 fan noise down and