[Elecraft] Year vs serial number

My K3s serial number is 10599 (somebody at Elecraft must have known the only signal reports I get in contests) HA! Would the number correspond to manufacture in 2016 or 2017? Factory assembled. 73 y Merry Christmas Tom HP1XT K2GO __

[Elecraft] Elecraft CW Net Report

Good Evening,    Conditions were good on both bands.  Lots of strong signals from the East.  QSB was slow and steady.  I was asked if I took rig information.  At that point I realized I knew what kind of rig each of you was running.  We used to exchange serial numbers before the K3 came

Re: [Elecraft] KPA500 P command not working from RPI and node red, any ideas?

To add to my previous email, if you check with the Hams on the Node Red Amateur group in groups.io, someone will have a KPA500 flow that already works. nodered-hamra...@groups.io Mike va3mw On Sun, Dec 20, 2020 at 10:24 PM Michael Walker wrote: > Hi Dave > > What is the display saying when

Re: [Elecraft] KPA500 P command not working from RPI and node red, any ideas?

Hi Dave What is the display saying when you’re trying to power it up?. I had NodeRed code running for it just fine never had an issue with it. I found at times I managed to get it into the binary upload mode which would mess it up. Mike VA3MW > On Dec 20, 2020, at 9:45 PM, davedkv wrote: >

[Elecraft] KPA500 P command not working from RPI and node red, any ideas?

I've been trying all day to get the KPA500 to "wake up" with a P command sent from a raspberry PI zero W running node red without success. Every other command works perfectly. If I hook up a laptop to the KPA500 it wakes up every time using the KPA utility of course, anyone know what the

[Elecraft] SSB Net for 12-20-2020

Here are the stations that checked in to the 20 m net today. Thank you to the relay stations for their help in logging stations net control does not hear. this net meets on Sundays at 1800Z on 14.303.5. Everyone is welcome. Eric WB9JNZ Call Name   State  Radio   Serial #

[Elecraft] Waiting for Godot

Hello all, I too am waiting for a K4 in Group 2 (a K4HD actually) but I put my order in late (July 2019), and so my wait will be even longer. Meanwhile, my 13 year old K3 (#170) is acting up with random errors and has turned into a repair project. I needed a radio that I could operate

[Elecraft] K4D external transverter question

I assume I can listen on one band while transmitting on another with the K4D. Does this extend to using an external transverter? For example, AO-7 Mode A I would be listening on 10m while transmitting on 2m via the transverter port to an external transverter. 73 Bill AA7XT *Bill Hein* *Sound