[Elecraft] N6TV to the Rescue Part 2

My badI thought I had checked my post and I realized I was not clear. I still have my K3s and P3 station along with the KPA-1500. The "S" box interlaces all the radios, K3s and KPA1500 along with the SteppIR.. So let me clarify... TNX Neil N4FN

Re: [Elecraft] MC-60A - K4 option request...

OK, yes - put it on the "to do" list... I have had the "same" issue with my KX3.  Adjusting the TX EQ, CMP, and Mike gain. See: https://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/ OK, I would like to see for the K4, a built-in APP that will

Re: [Elecraft] N6TV to the rescue

I can not overstate how great Bob N6TV is to work with--I asked him to create some complex stuff using S-Box and Y-boxes, he provided schematics, hookup charts, and cables labeled at both ends for EVERYTHING, and then spent more hours explaing everything to me. Just fantastic! If I had seen his

Re: [Elecraft] MC-60A

I have been running a MC-60A on my K3s great results. Just recently switched to a Heil PR-781 on a boom On Fri., Apr. 2, 2021, 2:39 p.m. Steve Fox, wrote: > Do I need to make any modifications to use an MC-60A microphone with a K3? > > Thanks > Steve > KA4FOX >

Re: [Elecraft] MC-60A

That mic has a built in preamp, even though it is a dynamic mic. You might consider that and lower your mic gain setting in the K3. Brian Denley KB1VBF Sent from my iPad > On Apr 2, 2021, at 2:39 PM, Steve Fox wrote: > > Do I need to make any modifications to use an MC-60A microphone with a

Re: [Elecraft] MC-60A

In the menu you will need to set MIC SEL to FP.L You can toggle it by pushing the #1 key and turn the Bias off in the same menu by toggling with the #2 Key. If you have the Fred Cady book a whole list of parameters for different Microphones are listed on Page 279. Ed.. AB4IQ -Original

Re: [Elecraft] MC-60A

No it should be fine 73, Bill WE5P Comfortably Numb > On Apr 2, 2021, at 14:39, Steve Fox wrote: > > Do I need to make any modifications to use an MC-60A microphone with a K3? > > Thanks > Steve > KA4FOX > __ > Elecraft mailing

[Elecraft] MC-60A

Do I need to make any modifications to use an MC-60A microphone with a K3? Thanks Steve KA4FOX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] K2/100 with SDRplay?

Fantastic Dave, Tnx for such a quick response. 73 Tom K2GO HP1XT On Fri, Apr 2, 2021, at 09:56, Dave Van Wallaghen wrote: > Tom, > > I have a complete write up here: https://www.w8fgu.com/k2pan.html > > 73, > Dave, W8FGU > > > On 4/2/2021 10:51:45 AM, cx...@4email.net wrote: > > >My K2 is

Re: [Elecraft] K2/100 with SDRplay?

Tom, I have a complete write up here: https://www.w8fgu.com/k2pan.html 73, Dave, W8FGU On 4/2/2021 10:51:45 AM, cx...@4email.net wrote: My K2 is modified with Z1 IF buffer added. Originally set up for N8LP's LP-PAN. I no longer have this config. New is the RSPdx from SDRplay that I

[Elecraft] K2/100 with SDRplay?

My K2 is modified with Z1 IF buffer added. Originally set up for N8LP's LP-PAN. I no longer have this config. New is the RSPdx from SDRplay that I would like to use. Anyone doing this and if so, what tips, suggestions would you have? 73 Tom HP1XT aka K2GO

[Elecraft] Transceiver transmitted composite noise at reduced output power

Hi Joe, I'll be pleased to email a pdf of Rob Sherwood's transceiver transmitted composite noise measurements to you or anyone who requests them 73 Frank W3LPL - Original Message - From: "Joe" To: donov...@erols.com, "CQ-Contest" , "Elecraft" Sent: Thursday, April 1, 2021