I got one for my KAT500 and KAP500 and they are fantastic.
I have no connection whatsoever with Keith.
73, Lou KE1F
On 8/30/2021 20:19, Keith Ennis via Elecraft wrote:
KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and
KPA1500
-
Digital Display Unit for
KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and
KPA1500
-
Digital Display Unit for Elecraft's W2 Watt Meter:
The digital read out on the Display Unit takes the guess work out of the LED
light bars.
-
Digital Display Unit for Elecraft's KXPA100 amplifier:
-
Don't
Cannot figure out how to control pwr out with a slider.
Help
Bruce Wade
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
Doug,
The reduced power is a consideration for the internal tuner relays, not
just for the PA transistors.
If you have the internal tuner installed, that power reduction is
automatic. For the K2/10, it is 2 watts and for the K1 it is 1.5 watts.
If you are using an external tuner, then
In learning about my new-to-me K2, I find that there is discussion about
automatic reduction of transmit power during tuning. Does that apply to the K1
as well? The K1 uses the same output transistor as the K2, but in a
single-transistor class C configuration, compared to the K2 which uses two
Thanks Bob for your advice.
I disconnected the ACC cable from the K4D and started it again. All OK this
time and the rig booted up normally showing Beta release 22 when clicking Fn>SW
List.
Many thanks Bob
73
Ray G3XLG
Sent from Mail for Windows
6 matches
Mail list logo