[Elecraft] MMTY settings for K3S

I am trying to setup standalone MMTY to run rtty.  Does anyone know the super-secret settings in mmty OPTIONS--SET UP TNC EMULATION MODE? I have assigned the K3S' sound card.  I am in DATA AFSK mode, 45-45 baud,  915 (I like it low) 170hz shift.  I appear to be receiving (though who knows, no

Re: [Elecraft] K4 or K4D?

Invoice, Packing List, radio menu, radio display, etc.73,Ed W0YK Original message From: Roger Stimson Date: 11/5/21 12:14 (GMT-08:00) To: Elecraft@mailman.qth.net Subject: [Elecraft] K4 or K4D? How can I tell if I have a K4 or a K4DK8RS  -  RogerSent from

Re: [Elecraft] PLL Range test

James, Listen to Dave, he is 'on target' with his post, and he is now the K2 'expert'.  But it might be helpful if you post the PLL high and low frequencies as well as the range test results. 73, Don W3FPR On 11/5/2021 8:27 AM, JAMES GUNNOE wrote: To follow up on my question about the PLL

Re: [Elecraft] K4 or K4D?

Look at the invoice? On 11/5/21 12:11 PM, Roger Stimson wrote: How can I tell if I have a K4 or a K4D K8RS - Roger Sent from Mail for Windows __ Elecraft mailing list Home:

Re: [Elecraft] Problem Tuning K3: now off centre fed dipole

Folks - Thread CLOSED. In the interest of relieving mail overload for those who are not interested in the argument on this topic, please take this off the list as it has been beaten to death. 73, Eric List moderator, COO, CFO and general playground monitor.. ;-) *elecraft.com

Re: [Elecraft] K4 or K4D?

Menu/Radio Type will tell you! > On Nov 5, 2021, at 12:11 PM, Roger Stimson wrote: > > How can I tell if I have a K4 or a K4D > > K8RS - Roger > > Sent from Mail for Windows > > __

[Elecraft] K4 or K4D?

How can I tell if I have a K4 or a K4D K8RS - Roger Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] [K2] K2/100 - Serial Port Quit Working

Yes, Vss Vdd and Vcc all look like appropriate values. > On Nov 4, 2021, at 3:47 PM, Don Wilhelm wrote: > > Bill, > > Make certain you have +12 volts on U4 pin 1 and +5 volts on U4 pin 16 and > about -25 volts (-8 to -27 volts) on U4 pin 8. > If those are correct, replace U4 and it should

Re: [Elecraft] Problem Tuning K3: now off centre fed dipole

On 11/5/2021 4:24 AM, CUTTER DAVID via Elecraft wrote: As has been said on many occasions, there is no real difference between a dipole fed in the middle and one fed off centre: as long as you can get the current to run in the dipole by suitable matching and don't waste it along the way, they

Re: [Elecraft] Problem Tuning K3: now off centre fed dipole

Great Article……. WA6VAB Ray K3 Sent from Mail for Windows From: CUTTER DAVID via Elecraft Sent: Friday, November 5, 2021 4:24 AM To: k...@altaeng.com; elecraft@mailman.qth.net Subject: Re: [Elecraft] Problem Tuning K3: now off centre fed dipole Chuck I'm not an expert but you might find it

Re: [Elecraft] K4 or K4D

IMHO, no. Wes  N7WS On 11/5/2021 9:05 AM, Dave Barr wrote: I operate from a 50 by 115 foot lot using a tribander and two open wire fed dipoles.  I use a K3 with the auto antenna tuner, but no panadapter.  Primary interest is contesting (usually qrp and S) and DX chasing.  I never operate 2R

Re: [Elecraft] K4 or K4D

The reasons to get a K4D over a K4 I think are only: 1) You need diversity receive. 2) You need to receive on two frequencies on different bands while still having bandpass filters engaged (the K4 can receive on 2 separate bands at once, but it has to bypass bandpass filters). On Fri, Nov 5, 2021

[Elecraft] K4 or K4D

I operate from a 50 by 115 foot lot using a tribander and two open wire fed dipoles.  I use a K3 with the auto antenna tuner, but no panadapter.  Primary interest is contesting (usually qrp and S) and DX chasing.  I never operate 2R in contests. There can be fairly high rf noise levels in the

[Elecraft] Fw: Re[2]: PLL Range test

GM James, I think you will be fine with a 15.4KHz range. The problem when approaching ranges much greater than that is that although the K2 firmware will linearize the VFO adequately, the granularity of fine increments may start to suffer, and it'll be more susceptible to temperature change.

[Elecraft] KX2 For Sale - Fully Loaded

I'm selling my KX2. It's like new. I've only used it a few times on the picnic table in the back yard and a few times in the shack. It works great but I don't get around much any longer. It spends most of it's time in it's case on a shelf. It comes with the following: KX2 serial #99, KXAT2

Re: [Elecraft] PLL Range test

To follow up on my question about the PLL range test, how critical is it to be at or below 15Khz? Currently I am at 15.40Khz after playing around with the winding spread. The errata sheet says to be between 9.98Khz and 15Khz difference in the high and low reading. 73 James, KJ4KEM > On

Re: [Elecraft] Problem Tuning K3: now off centre fed dipole

Chuck I'm not an expert but you might find it useful to read http://www.karinya.net/g3txq/baluns/baluns.pdf Antennas popular with Elecraft back-packers are off centre fed dipoles: eg 20ft of wire up a tree and 10ft of wire on the ground as an example. Many low power and one-man dxpeditions use