I am confused about the connection and communication between my PC and my
MicroHam stationmaster (SM), K3, P3 and hope that someone can help clear this
up.
I just modified my K3 to upgrade it to the KIO3B digital I/O board. Before
upgrading to the KIO3B, I had used a custom RS232 cable to
3806 kHz (We met on 3803 kHz this evening), 9PM ET Sunday (0200Z
Monday).
Thanks to the following check ins (w) and relays (rel):
Call State Radio/Amp Name
1 N8SBE MIK4D/KPA500 Dave (w),(op)
2 K8NU OHK4D/KPA1500 Carl (w)
3 W9PCS WIK4D/KPA500
Good Evening,
Twenty meters was full of ongoing QSOs when I searched for a
frequency. Thank you for finding me; I'm sure propagation assisted you
all. Conditions were better than I had hoped for. Noise was low on
twenty meters and not much higher on forty meters. QSB was moderate on
For Sale K-POD $350 plus shipping. New in box.
Selling due to QTH relocation.
Contact off list for questions, photos, shipping, pickup/delivery, phone call,
etc.
Thank you.
73,
Jim WI6X
__
Elecraft mailing list
Home:
For Sale K-POD $350 plus shipping. New in box.
Selling due to QTH relocation.
Contact off list for questions, photos, shipping, pickup/delivery, phone call,
etc.
Thank you.
73,
Jim WI6X
__
Elecraft mailing list
Home:
For Sale K4D with KAT4 Auto-Tuner asking $5,700 plus shipping.
Excellent condition.
Original owner.
Original shipping boxes.
Selling due to QTH relocation.
Contact off list for questions, photos, shipping, pickup/delivery, phone call,
etc.
Thank you.
73,
Jim WI6X
For Sale KPA1500 asking $6,700 plus shipping.
New in 2023.
Excellent condition.
Original owner.
Original shipping boxes.
Selling due to QTH relocation.
Contact off list for questions, photos, shipping, pickup/delivery, phone call,
etc.
Thank you.
73,
Jim WI6X
I have complete PX3-K as packaged by Elecraft for sale. Panadapter kit for the
KX3. Asking $560 ppd CONUS. Contact off list.
73, Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
On 12/17/2023 1:12 PM, Brian Hunt wrote:
I’ve discovered that it’s easier to see a very weak signal on the
waterfall than in the amplitude plot. Setting the SVGA screen for 25%
spectrum and 75% waterfall gives lots of space to see dim traces. You
may have to adjust the threshold a bit.
YES!
Hi Jim,
I’ve discovered that it’s easier to see a very weak signal on the waterfall
than in the amplitude plot. Setting the SVGA screen for 25% spectrum and 75%
waterfall gives lots of space to see dim traces. You may have to adjust the
threshold a bit.
73,
Brian, K0DTJ
> On Dec 17, 2023, at
On 12/17/2023 12:05 PM, Jim Murray via Elecraft wrote:
My thought is at this point the P3 is not doing me much good looking
for a weak dx signal. I have to think I have something not set up right
etc..
What is required is careful (and ongoing) adjustment of P3 controls. For
everyday
Can't speak to the K3s, but the K3 required a modification to the 1st IF
[8 MHz] gain for my P3 to show weaker signals. It was just a resistor
change.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
Jim Murray via Elecraft wrote on 12/17/2023 12:05 PM:
Hello all, Having acquired a
Hello all, Having acquired a fully loaded K3s fairly recently I am behind the
curve of those fortunate enough to have a K4. Its taken several weeks to get a
decent handle on the K3s and now on to the P3. I have all the manuals
including Fred Cadys K3s and P3. I find the K3s to be excellent
David,
Point taken. We did meet below 3.8 MHz, but there were complaints from
US amateurs that we were excluding General class amateurs stateside.
Considering that I've never heard anyone trying to check in from GB when
we were lower in frequency, I wouldn't expect to see any that early
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Please join us on 3806kHz (NOTE THE NEW FREQUENCY WHICH MOVES US INTO
THE GENERAL CLASS BAND)plus or minus QRM (see the Netlogger discussion,
below), 9PM ET Sunday (0200Z Monday). Note that the net stays on the
same local time, when we switch back and forth to/from Daylight time, so
the UTC
merry christmas and new year to all i hope ya have blessed week as well i
been on 60 on my kx2 alot now for my frist time late tgis years lots of fun
73 to all
Jackie
N4MJG
__
Elecraft mailing list
Home:
Early in my career at SW Bell (then management with AT Info Systems) I
was a Teletype tech. We worked on Model 28, 33, 35, 40, 3274 bisync
terminals, printers, tape punch, readers and tape printers. Classes on
each model were five days a week, eight hours a day for three weeks. It
took me at
Hello Don, I was a car mechanic for about 40 years before I became a coffee
roaster. I ran my own shop for about 20 years. It was the same way in the
automotive industry, it took me a while to train new people. Even if they were
experienced mechanics, although the experienced ones were much
19 matches
Mail list logo