We've added the XV432 to our order page. It officially ships 3/15, but I
think we'll beat that.
There also is a new XV data sheet (.pdf) on our manual download page
that includes the XV432 information. See:
http://www.elecraft.com/manual/XV%20Data%20Sheet%202006%20web.pdf
The XV432 operates
I'm packing up in preparation for flying out tomorrow to Orlando, FL,
for the Orlando Hamcation. I'm looking forward to seeing everyone and I
am wondering if there are any get-togethers Saturday night?
I will have the new XV432 transverter with me to show off at the
Elecraft booth, along
The data sheet says 28-32 for the XV432.
73,
Eric
_..._
-Original Message-
From: Simon Brown \(HB9DRV\) [EMAIL PROTECTED]
Date: Thursday, Feb 9, 2006 7:25 am
Subject: Re: [Elecraft] XV432 added to order page; New XV Data Sheet
Drat, just found the 28 - 30 MHz IF reference in the flyer.
Don is a bit off the mark on this one. :-) We're probably closer to
May-June, based on current parts deliveries and production start up work.
I have been receiving a flood of requests for info on this project. To
be honest, I have have not had the time to answer each one individually.
(Were
Hi Uli,
The KXB3080 kit will be $65 and includes the newest KX1 firmware if
needed. (We've been shipping KX1s with this version (V1.02) since Feb 7th.)
We're putting it into production now and it should be ready to ship in
about 2 weeks. (The only item left to complete is our final review of
We also stock them directly on the Elecraft order page.
73, Eric
Phil Kane wrote:
On Sun, 5 Mar 2006 22:16:03 -0500, Brent Sutphin wrote:
Were is a good source for Anderson Power Pole connectors. I have
found several places but they all seem to have a minimum order?
Try
Let's end this thread.
73,
Eric
_..._
-Original Message-
From: wayne burdick [EMAIL PROTECTED]
Date: Thursday, Mar 16, 2006 8:35 am
Subject: Fwd: [Elecraft] Simple-minded SPAM filters vs. list participation
Do you think we should end this thread?
tnx
W
Begin forwarded message:
Looks like we've beat this one to death. :-) Let's end this thread for now.
73, Eric WA6HHQ
Elecraft List Moderator
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
Hi Fred,
The manufacturer of the MH2 microphone discontinued that model and we
have been looking for a replacement. We are in discussions with another
manufacturer now for a replacement hand mic, but it will be a couple of
months before we can get it in.
Fortunately we designed the K2 and
Hi Web,
I also use all of the XVs in my shack and they do not have a heat
problem. The only restriction we place on them is for continuous duty FM
use, where we recommend that they run at 5W. I believe this is where
some customers felt they were hot when they didn't follow this
Mike, K7MDL, is doing this. See:
http://mysite.verizon.net/michael_d_lewis/Portable_HF_VHF_Station.htm
73, Eric WA6HHQ
--
John D'Ausilio wrote:
Especially if driving a short stack of antennae, with near-field
interaction? I'd love to hear from others running similar
Hi Mike,
We officially previewed the amplifiers this weekend in our booth at the
Visalia DX convention and prior to that we were not able to answer all
of the emails we were being flooded with. (I just got back into the
office today.)
We previewed working units of the KPA800 (800W) and
Don is incorrect on the release of 3.97. We just went final on 3.97
this morning.
See: http://www.elecraft.com/K3/k3_software.htm
K3 Utility should now reflect this when checking releases.
As don said, 3.99 is in just internal Alpha testing and will not be
released at that level. It will
http://www.tentec.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Sorry - that was not intended to go to the list.
Eric
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Absolutely. We always are listening. :-)
73, Eric WA6HHQ
On 6/2/2010 8:09 AM, Phil Hystad wrote:
I think we all need to remember that features are approved and added by
Elecraft,
not by users. However, I bet a lot of the features that we like in the K3
come from
user suggestions or
Hi Atsu,
See:
http://www.elecraft.com/Awards/eqp_2010_results.htm
There are also now links to this data from the main Elecraft web page.
73, Eric WA6HHQ
On 6/8/2010 5:08 AM, JE1TRV wrote:
My friend is wondering when QSO PARTY (EQP 2010) results become ready?
I could not find on the
Alan - thanks for doing this!
I've added these to the links at the bottom of the K3 page at:
http://www.elecraft.com/K3/K3.htm
73, Eric WA6HHQ
Alan Sewell N5NA wrote:
Thanks for the suggestion Alan. I've added that perspective as page
two of the pdf. Just re-download the pdf at
The KREF3 is not in current planned development. I thought we had
removed the references to it in all of our docs. Is it still showing up
somewhere?
73, Eric
---
On 6/9/2010 9:49 AM, elecr...@g4fre.com wrote:
This question is one I have been asking annually at the Elecraft booth at
Hamcom in
End of Thread.
As noted in prior versions of this recurring thread, we will be keeping
the Elecraft list as a single list to maintain the sense of community
and as a single source for us to get your feedback. While we do
occasionally read other groups, this is our primary source.
There are
We've had an intermittent phone system problem at the main Elecraft
facility for the past week or two. If you called our main number,
831-763-4211, it sometimes appeared to ring for a long time and then go
to voice mail. We are actually here, wondering why the phones are so
quiet :-)
We think
Way too early for that. My best guess is probably some time Q1 of this
next year.
73, Eric WA6HHQ
On 6/17/2010 10:19 AM, Julius Fazekas n2wn wrote:
Any guidance on price levels, particularly for the external tuner? Pre-order
list?
Cheers,
Julius
-
Julius Fazekas
N2WN
Tennessee
Brett is correct in that we ultimately determined that the TCXO3-1 parts
already met our 0.5ppm spec, so additional temperature correction in f/w
was not necessary. We only planned on using the f/w correction if we
needed it to get to the 0.5ppm level. I apologize if we have not made
this
Time to end this thread. Looks like its had enough ;-)
73, Eric
List Moderator
---
On 6/18/2010 12:03 PM, Peter Wollan wrote:
Elecraft **does** build a $699 radio. Actually, $690. Check it out,
it's pretty good.
Peter W0LLN
On Fri, Jun 18, 2010 at 1:20 PM, Jim Miller KG0KP
No. Just one time on one of the antenna ports into a dummy load.
73, Eric
On 6/18/2010 5:35 PM, Gary Lee wrote:
Must I do this for each antenna port?
__
Elecraft mailing list
Home:
A note for our international customers: I will be at the Elecraft booth
at Ham-Radio Friedrichafen, Germany, this weekend, June 25-27.
Booth A1-751a
I'll be demonstrating the K3 and P3 Panadapter along with our other
products.
http://www.hamradio-friedrichshafen.de/ham-en/index.php
See you
End of thread. Folks, lets end the various amps at FD threads.
73, Eric WA6HHQ
List Moderator
---
--
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
End of thread.
73,
Eric. WA6HHQ
List moderator
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Yes - Again, let's end this thread now, please.
It has been beaten to death and to be honest, we really don't mind the
attention from our competitors. We obviously are doing something right. ;-)
I apologize for not jumping in earlier on this and several other large
threads. I was overseas
This thread is also ended.
73, Eric
List Moderator
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
I'll post the complete Elecraft list guidelines in a moment, but I'd
like to focus on several important core items first. These are absolute
guidelines for list behavior.
The Elecraft list is provided as a service to our customers and other
hams, and to provide Wayne, myself and other Elecraft
Top posting is the official standard for this list, and its especially
important for those of us who also read our email on PDA phones. (I'm
using the Motorola Droid..)
Reading the response first, at the top, is a huge time saver, especially
when you have to read hundreds of emails daily as we
Elecraft Mail LIST GUIDELINES 2010a
For those of you who are new to the list, (and for those of us who have
rapidly failing memories..), here is a quick list of things to remember
when posting to this list. Please save this for future reference.
The most important thing to remember is that this
We're darn close and the P3 is proceeding on plan so far. Everything has
been released to production and we are just awaiting delivery of the
final production sheet metal and stuffed PCBs. We're also refining the
firmware as we go through field test over the next couple of weeks.
Based on
Hi Ed,
Sorry for the delay replying to this thread. I've been out of town for
ten days and am just now catching up with older emails.
I just checked and we're running at 3-4 weeks right now for repairs and
upgrades. My target is 2 weeks or better. I was in the factory yesterday
and personally
Folks - Let's end this thread ASAP. I'll allow another 4-5 postings, if
necessary, then let's let it rest.
I count 44 postings (some a little overheated emotionally ;-) in the
past 1.5 days. Wy too many on a single topic.
73, Eric WA6HHQ
List moderator
The technical content of this thread, including the disagreements, has
been fine and quite informative. But the large volume of postings on
this topic, and the loss of civility by several posters, has now ended
its usefulness.
[Thread ended]
73, Eric WA6HHQ
List Moderator - and playground
New PCB artwork. This has been shipping for many months.
73, Eric WA6HHQ
_..._
On 7/10/2010 8:15 AM, Ken Roberson wrote:
Hello all
Are the DSP Boards on the new K3's reworked or is it new
artwork ?
Thanks 73 Ken K5DNL
__
Only the one with the iC element, which we sell as the Proset-K2 (for
the K2 and K3).
The Heil HC4, HC5 and Goldline dynamic elements do not need bias turned on.
73, Eric
_..._
On 7/10/2010 9:59 AM, Don Cunningham wrote:
Eric,
Does the Heil ProSet need bias on to work?? I don't have one,
You can watch real time scores for each WRTC team championship this
weekend at:
http://www.wrtc2010.ru/online/online_results.php
With 48 teams, here are how some of the NA teams are doing
:
N6MJ/KL9A (Running K3s) are in second place, just a hair (15 qso's)
behind the leaders, RW1AC/RA1AIP.
All of the encoders mentioned below also have a push in switch (to
select hi-lo cut vs shift-width etc.) As a result, it is normal for
there to be a small amount of additional left/right play in the encoder
knob due to the action of the switch.
Don is incorrect, we did not change anything that
We're not currently doing anything in these areas. I can;t say what will
happen in the future.
73, Eric WA6HHQ
On 7/12/2010 3:05 AM, KU5Q wrote:
Will Elecraft ever produce any products for the military or commercial radio
services?
As a heads up to our loyal customers (and potential customers who are
considering our products) we will be adjusting our prices up slightly on
the K3 and a number of our other products before the end of next month.
Of course, any orders received prior to that point will be honored at
the
As Wayne mentioned in his email, we've been shipping P3s to our Field
Testers and are in the process of verifying the manual and P3
operation, and incorporating suggestions from our field Testers.
First shipment estimate for P3s is 7/26-7/30.
We now expect to receive our first production
Not near term, but we'll revisit this as we get caught up on P3s.
73, Eric
On 7/14/2010 6:52 AM, Andrew Moore wrote:
Is there any likelihood of blank P3 cases being made available in the
future (as with the EC1, EC2) for people who would like to build their own
matching accessories?
Let's end this thread for now. If you have further questions or
comments, please correspond directly with Gary.
73, Eric WA6HHQ
Elecraft List Modulator
-
On 7/14/2010 11:40 AM, Duncan Carter wrote:
I respectfully disagree that Inrad's 500 Hz roofing filter is too
narrow. In my opinion,
This topic has easily exceeded the 'Too many postings' limit. Time to
end this topic for now.
In the future, on a high volume topic like this, please self regulate. :-)
73, Eric WA6HHQ
Elecraft List modulator
__
Elecraft mailing
Let's end this thread.
In general, if a topic is taken off list to discuss, which is always
OKk, please also post the final resolution to the list so others can
benefit from the results. This will save on future questions on the same
topic posted to the list.
in general, it is outside of the
Let's end this thread as it is a repeat of the periodic APP thread on
this list and others. (Sort of like the CW/Non-CW tes threads etc. ;-)
Searching the list archives for the word 'APP' at
http://www.elecraft.com/elist.html will yield a plethora of APP information.
73, Eric WA6HHQ
Elecraft
The KPA100 for the K2 uses the APP connector as its power line
interface. That's another alternative.
73, Eric WA6HHQ
---
On 7/26/2010 12:42 PM, vidi wrote:
Thank you Don, your idea also crossed my mind, but I was wondering if there
is any thing more substantial out there like on the K3.
73
Yes. Brightness is fully adjustable.
It also easily tunes signals with its point and click tuning knob.
Actually faster than a mouse for me.
73, Eric WA6HHQ
On 7/27/2010 9:36 AM, Andrew Moore wrote:
The importance of a control for display brightness on the P3 is an important
feature that
We still have strong K2 sales and fully support it. While the K3
certainly impacted the total K2 monthly volume, its still selling well.
Its also easy for us to keep making it.
Both the K3 and K2 have unique features that differentiate them. And on
the K2, you get to enjoy the smell of rosin
We certainly appreciate the support of everyone, but let's end this OT
thread for now.
73, Eric WA6HHQ
Elecraft List Modulator
-
On 8/2/2010 11:52 AM, Edward R. Cole wrote:
If it were in the hands of the consumer and Americans had seen the
light?
The P3 Owner's Manual rev A2 is available on the website in the Manuals
section.
Direct link: http://www.elecraft.com/manual/P3_Owner's_Manual_Rev_A2.pdf
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
We started shipping the first P3s last Friday, 7/30. Another large block
shipped today.
We are now notifying, confirming and shipping P3 orders placed on April
15th. This is a very large group (the 1st day we took orders) and we
will be working our way through notifying everyone and shipping
The K3 Frequency Memory Editor has now been formally released. See:
http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm
Thanks to Dick Dievendorff for all his hard work!
73,
Eric WA6HHQ
__
Elecraft mailing list
Home:
Let's end this thread. This is another topic that can be argued
forever. ;-)
If you still feel the urge, please feel free to discuss off-list.
73, Eric WA6HHq
Elecraft List Modulator
On 8/9/2010 10:14 AM, The Smiths wrote:
I completely disagree... Clockwise rotation makes things bigger,
thread ended :-)
73,
Eric. WA6HHQ
Elecraft List Modulator
www.elecraft.com
_..._
On Aug 9, 2010, at 3:07 PM, John Merrill johnn...@gmail.com wrote:
As in many mailing lists, the rule is to leave the policing to the
moderatorFWIW.
On Aug 9, 2010, at 2:37 PM, John Ragle wrote:
Must be a -really- dead HF propagation day..
Let's end this thread at midnight PDT tonight (0700Z)
Please keep it civil and as terse as possible.
(I'll be posting the list guidelines tomorrow..)
73,
Eric. WA6HHQ
Elecraft List Moderator
www.elecraft.com
_..._
On Aug 9, 2010, at 9:29 PM,
Elecraft Mail LIST GUIDELINES 2010a
For those of you who are new to the list, (and for those of us who have
rapidly failing memories..), here is a quick list of things to remember
when posting to this list. Please save this for future reference.
The most important thing to remember is that this
I'd like to focus on several important core items. These are absolute
guidelines for list behavior.
The Elecraft list is provided as a service to our customers and other
hams, and to provide Wayne, myself and other Elecraft employees with
direct feedback from you on technical, operational and
Top posting is the official standard for this list, and its especially
important for those of us who also read our email on PDA phones. (I'm
using the Motorola Droid and a new iPad to read email while away from my
office PC ..)
Reading the response first, at the top, is a huge time saver,
Please avoid the temptation to swap serial numbers. It really drives us crazy
on support at this end. We also can not offer custom serial numbers for the
same reason.
73,
Eric WA6HHQ
www.elecraft.com
_..._
On Aug 10, 2010, at 9:27 AM, Joe Planisky jp...@jeffnet.org wrote:
You know, sooner
Folks, lets end the argument portion of this thread. This is outside of the
list guidelines (just reposted).
Keep it cordial.
73,
Eric
elecraft List Moderator
www.elecraft.com
_..._
On Aug 10, 2010, at 8:33 PM, Tim Tucker ae...@worldwidedx.com wrote:
The FCC Certified it, so who cares?
This is an upcoming P3 feature that will show up in a future f/w release.
73, Eric
On 8/11/2010 5:27 PM, Joe Subich, W4TV wrote:
So it is possible to put K3 macros on the P3 function keys?
Yes, that was straight from Eric on this list some months ago
when discussing the P3 after it was
This is also stated in the list guidelines posted earlier this week.
73,
Eric
Elecraft List Modulator, Moderator, etc.
www.elecraft.com
_..._
On Aug 12, 2010, at 7:10 AM, Larry - K2GN k...@comcast.net wrote:
Fred is right on!
I would add that besides putting something in the subject. Like
The hole cover labels just came in last week and were not included in early P3
shipments. We know who these are and will be sending them out to everyone.
73,
Eric. WA6HHQ
www.elecraft.com
_..._
On Aug 12, 2010, at 6:08 PM, Phil Hystad phys...@mac.com wrote:
Am I the only one who is missing
Push and hold SUB until you see Unlink. It will toggle on each hold between
Link and Unlink.
Note: if you have the sub receiver, and even longer hold will put you into
Diversity receive mode.
73,
Eric
www.elecraft.com
_..._
On Aug 13, 2010, at 3:32 AM, Jim Rhodes k...@longlines.com wrote:
Dale (from our K3 support group) and I are flying out today for the
Santa Barbara, CA, ARRL Hamfest this weekend. We'll have a full Elecraft
booth there and we will be displaying the K3, P3, our other products,
and the upcoming KPA500 for your perusal. I will also be giving a talk
on advanced
transceiver... ;-)
On 8/13/2010 10:59 AM, Eric Swartz - WA6HHQ, Elecraft wrote:
Dale (from our K3 support group) and I are flying out today for the
Santa Barbara, CA, ARRL Hamfest this weekend. We'll have a full
Elecraft booth there and we will be displaying the K3, P3, our other
products
3 feet.
73, Eric WA6HHQ
---
On 8/17/2010 12:36 PM, Jim Spears wrote:
What is the length of the cables (RG59 and serial) supplied with the P3?
Jim/N1NK
__
Elecraft mailing list
Home:
We are working on it right now. It should be soon.
Stay tuned!
73, Eric
---
On 8/19/2010 5:57 PM, John Klewer wrote:
Is there any prediction about the availability of the MAC version P3
firmware update utility?
John
__
Elecraft
I'd like to clarify this a bit.
While the K3 does have some protection against over voltage on its supply, we
do not garantee it will survive an overvoltage event in all cases.
73,
Eric
www.elecraft.com
_..._
On Aug 20, 2010, at 1:00 PM, Scott Ellington sdell...@facstaff.wisc.edu wrote:
Its also important to note that the P3 explicitly provides an IF
output to down-converter boxes like LP-PAN and the softrock board. This
in turn sirectly supports directly supports any PC-Based s/w like
skimmer etc.
73, Eric
__
End of the OT Norton part of this thread.
73, Eric
Elecraft List Moderator
On 8/23/2010 7:29 AM, John Ragle wrote:
Perhaps this is not as off-topic as it appears! I would like to
add my viewpoint to those who condemn Norton's various utilities...I
concur in their assessment
The Elecraft KUSB now uses the FTDI chipset.
73,
Eric
www.elecraft.com
_..._
On Aug 23, 2010, at 8:20 PM, Ken Kopp k...@rfwave.net wrote:
Purchased mine from Elecraft with my K3.
73! Ken Kopp - K0PP
K2 #56 65
K3 #56
P3 #56
At that time it used the prolific chip set.
You can also inspect the driver used in windows to identify it.
Eric
www.elecraft.com
_..._
On Aug 24, 2010, at 5:52 AM, Earl n...@adxa.org wrote:
Is there a way to tell which chipset is used in the KUSB I purchased in June
2009??
Earl N5ZM
Hi Raj,
We normally do not ship the RXA board with the KXV3 or KXV3a boards.
Those boards have incorporated that circuitry since late 2008.
I just checked your records and it looks like you ordered the RXA board
when you ordered a number of other mod kits.
73, Eric
---
On 8/23/2010 5:45
The link from our email list page, http://www.elecraft.com/elist.html
, to Nabble is now fixed.
thanks for the heads up!
73, Eric
On 8/25/2010 9:09 AM, Mike K8CN wrote:
Nabble appears to have adopted a modified form of URL for its reflector
groups. The link from the Nabble main page to
We changed the autodetect timing in later W2 firmware releases to dela
with SO2R use. Check to make sure you have the latest f/w loaded in the W2.
See: http://www.elecraft.com/software/W2/elecraft_w2_software.htm
73, Eric
On 8/25/2010 9:21 AM, Bill K9YEQ wrote:
I was experiencing some
Lets end this recurring thread for now.
Please search the Nabble Archives at
http://www.elecraft.com/elist.html for prior conversations on this topic.
73, Eric WA6HHQ
Elecraft list Modulator
---
__
Elecraft mailing list
Home:
Lets end this thread for now.
We're a lot smaller than Amazon, but we'll take a look at this.
Joe is probably correct though, in general all that changes is that the
vendor (us) is charged for the transfer fee and we end up increasing the
product price to cover it.
73, Eric WA6HHQ
Elecraft
END of thread
73, Eric WA6HHQ
Elecraft list Modulator
---
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
folks - this topic was closed yesterday. Please respect the
moderator's request.
73, Eric WA6HHQ
Elecraft moderator, modulator etc.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
End of thread.
73,
Eric WA6HHQ
elecraft list modulator
On 8/31/2010 10:33 AM, Gary D Krause wrote:
Dale is a friend of mine and a great guy. He lives on the other side of town
from me. I'll have to ask him how his vacation in London was LOL! I've seen
this exact same email before and
For inquiring minds, we will be making the adjustments to our pricing
in a week and a half, on September 14th. We originally planned to make
these changes by 9/1, but shipping P3s has taken priority. (Good for
everyone. :-)
73, Eric WA6HHQ
We can't say yet. That's what will happen on the 14th.
73, Eric
On 9/2/2010 3:18 PM, W0FK wrote:
Thanks Eric. What items will be going up, and by how much?
73,
Lou, W0FK
__
Elecraft mailing list
Home:
All KUSB usb to serial adapters currently sold by Elecraft use the FTDI
chipset. this is noted directly on the KUSB order line on our order page.
73,
Eric
www.elecraft.com
_..._
On Sep 8, 2010, at 2:58 AM, Mike n...@nf4l.com wrote:
I don't think Elecraft produces the cable.
FTDI
I'd like to focus on several important core items. These are absolute
guidelines for list behavior.
The Elecraft list is provided as a service to our customers and other hams, and
to provide Wayne, myself and other Elecraft employees with direct feedback from
you on technical, operational and
Let's end this thread for now. The number of posts onthe topic have clearly
exceeded the normal list limit.
We appreciate the feedback and will post more info on the AMP as it gets closer
to release.
73,
Eric
Elecraft List Moderator
www.elecraft.com
_..._
Jim, Don and Joe,
To keep list traffic reasonable, let's take this recurring discussion
off list to direct email for now. Once you have all agreed please feel
free post the results to the list.
Also, there is a lot of past info on this topic that is searchable in
the list archives.
Also,
I am very sad to post this. We are in a state of shock and loss here
at Elecraft.
Scott King, AH6KL, our first full time employee and oldest member of the
Elecraft family, passed away suddenly Tuesday night.
Scott was a personal friend and colleague of mine for the past 25 years.
We
Hi Gary- A quick note: As per the list guidelines, please limit
commercial postings to one per month on the list.
73, Eric
On 9/21/2010 9:38 AM, Gary Hvizdak wrote:
We are once again accepting paid orders for INRAD 8-pole 700 Hz K3 roofing
filters. We were surprised when they sold out
End of thread.
73,
Eric
Elecraft List Moderator
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Guys - this thread has been formally closed. (both the 700 hz and ESSB sub
threads).
Please take further discussion off list.
73,
Eric
Elecraft List Moderator - really!
www.elecraft.com
_..._
On Sep 21, 2010, at 6:43 PM, Joe Subich, W4TV li...@subich.com wrote:
Jeff,
Because it's
Do ypu have signal averaging turned on? If so, this is normal, since the
average is recalculated on new data as you tune.
73,
Eric
www.elecraft.com
_..._
On Sep 21, 2010, at 7:35 PM, Chris Meagher cmeag...@dodo.com.au wrote:
Hi there,
When tuning the K3 the dynamic range of signals and
I've notified Alan about this.
73,
Eric
On 9/22/2010 1:26 PM, Grant Youngman wrote:
Also, it appears that the tap-to-tune function does work properly after the
REV button is pressed either.
Grant/NQ5T
On Sep 22, 2010, at 2:12 PM, Grant Youngman wrote:
Yes, that seems to be the case.
If the K3's menu setting for the RTTY tone freq does not match that
used by MYTTY, they will not both decode at the same time. Same for the
menu entry for RTTY baud rate.
73, Eric WA6HHQ
Elecraft
On 9/23/2010 1:42 PM, W8JH wrote:
Thanks to all who have replied both on and off reflector.
Yes - This thread is ended. Please no more comments.
73, Eric
Elecraft List Modulator and Moderator
-
On 9/25/2010 4:31 PM, The Smiths wrote:
Is this tread really necessary.. We just saw this same email come from
someone else who's computer was infected by malware. Just ignor it and
END of this thread and all related ones under various similar subject
lines.
73, Eric
Elecraft Moderator
On 9/25/2010 4:28 PM, Ron D'Eau Claire wrote:
On Sat, Sep 25, 2010 at 04:12:25PM -0700 I heard the voice of
Ron D'Eau Claire, and lo! it spake thus:
Often the virus looks through the
901 - 1000 of 2674 matches
Mail list logo