?
For those of you using PC control, how did you set it up?
How are you feeding audio to the PC and back ??
Thanks 72
Jerry N0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
adjusted on the K2 to around 10 watts while doing
these tests.
Is it possible for the KPA100 to sense the power level of the rig and go
into TX.
Any thoughts??
Thanks and have a great weekend all
72 Jerry N0JRN
___
Elecraft mailing list
something. :-)
Manuals say I can charge the internal battery from a power supply with the
battery switch in either position.
Just curious if I need to use caution while operating.
Thanks and 72:
Jerry N0JRN
___
Elecraft mailing list
Post
CUR
and raised the current limit to 3.0 amps.
Initial setting per the manual was 2.5 amps.
Just wanted to be sure I wasn't going to burn the house down
What cha think ??
72 Jerry N0JRN
___
Elecraft mailing list
Post
error corrected the problem.
Check you schematic and check all the components related to T1 and
T2..
YMMV but it's worth a look.
72 Jerry N0JRN
On 4/13/2008 5:00:20 AM, Lennart ([EMAIL PROTECTED]) wrote:
After I installed the K2 SSB adapter I get half
I hear folks calling CQ Test but no idea what test their working.
SO, what test is it and what is the exchange
OO JerryN0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
it compliments the pitch
setting in my filters.
Thanks and 72: JerryN0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
: Jerry N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
appreciated.
Thanks 72: Jerry N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Thanks and 73:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
there.
Now to call Mouser and get another MAX1406 on the way
Thanks guys and I'll keep you up on how things work out.
72JerryN0JRN
On 12/14/2009 6:22:37 AM, Don Wilhelm (d...@w3fpr.com) wrote:
Jerry,
I will take back what I said about U4 - it is faulty
for damaging this chip
???
I have 2 new chips coming from Mouser. I'm not installing them until I'm
satisfied that I've checked and double checked EVERYTHING involved.
Thanks again and happy holidays to the group:
72 Jerry N0JRN
- Original Message -
From: Don
Jerry N0JRN
( BTW, my ISP is also acting up and it's taking several hours for my posts
to show up on the reflector )
Back to 40 meters and tried to
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Now to move on to the next challenge.
Thanks to everybody for your suggestions and support.
73JerryN0JRN
- Original Message -
From: Don Wilhelm d...@w3fpr.com
To: n0jrn n0...@mchsi.com
Sent: Monday, December 14, 2009 6:22 AM
Subject: Re: [Elecraft] KPA100 problem
if the relays are
working.
Thanks and 73
Jerry N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Thanks Don:
Easy enough ! I appreciate that very much.
Yes I am working with my KPA100. I'm looking for why the K2 drops out of TX
when I try to adjust output above 35 watts.
A couple of the bands are also showing excessive current draw and high
reflected.
Just wanted to check the
N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list
TO THE KISS RULE
73 Jerry N0JRN
On 12/20/2009 7:39:08 PM, Tom Hammond (n...@embarqmail.com) wrote:
Jerry:
What are you using for a power supply? Brand ratings? Metered?
__
Elecraft mailing list
Home: http
N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
but the connections
between the K2 and transverter is troubling.
Is this as simple as hooking the K60xv in out to the transverters TXin /
RXout
Thanks and 73: Jerry N0JRN
__
Elecraft mailing list
Home: http
Hey gang:
I have my KAT100 and KPA100 in a separate EC2 enclosure.
I considering adding the XV50 to this package.
Has anyone done this and can you tell me if all units can be interfaced at
the same time
Just curious !
Thanks and 73: JerryN0JRN
for the
KAT100 shown in that figure.
73,
Don W3FPR
n0jrn wrote:
Hey gang:
I have my KAT100 and KPA100 in a separate EC2 enclosure.
I considering adding the XV50 to this package.
Has anyone done this and can you tell me if all units can be interfaced
at
the same time
Just
Hey gang:
When installing the KPA100 in an EC2 enclosure, should I install the
speaker ???
Not sure if hooking up the KPA100 / KAT100 in the EC2 will mute the
speaker in the rig
Just curious
73 JerryN0JRN
Is there a RFTB tonite ???
Thanks !!!
George , N2JNZ
FP 344
YUPand I'll be there with bells and whistles on !!!
It'll look like Santa only I'll have Flyen Piggies leading the sleigh.
CU all there
__
Elecraft mailing list
Prefer unbuilt if you have one that sitten around drawing dust.
Please e-mail direct !
Thanks and 73:
JerryN0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
some noise and see if you can hear my peanut
whistle.
IF all else fails,I'll drive by Brian's and give a holler on 27.185
O Oink
Ya'll come now ye heeear
72 Jerry N0JRN
___
Elecraft mailing list
Post to: Elecraft
. Does some weird stuff when you do that.
Anyway, it's cooken now .
More later
72 JerryN0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
think ??
Thanks and 73 JerryN0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
see are the side panels needed. Does the conversion kit
include the taller side panels ??
Thanks again and everyone have a great weekend.
73 Jerry N0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
OH YA
Run For The Bacon !
I'll be on tonight running my newly finished K2 #6272
This will be it's maiden voyage... Would appreciate any reports
on tone quality...
Hope to see you all there..
72 and OO Jerry N0JRN
and no power on SSB while CW if fine )
I'm guessing it's something I overlooked but it's been a long day. I'll dig
into this tomorrow. Any ideas of what I missed would certainly be
appreciated.
Thanks and 72: Jerry N0JRN
why it works on CW and not on SSB on the higher bands.
I would obviously blame the SSB board and some mistake I might have made but
there's nothing on the SSB board that is band specific
Is there ???
Still digging :-)
72 Jerry N0JRN
aren't
doing what they should.
As Don would say, go back and check all components, solders etc. and
make sure you put them where they belong. :-)
Now for the rest of the options.
Everybody have a great weekend.
72 Jerry N0JRN
Nope, KSB2 kit had an extra 10K in it.
I checked all others to insure there wasn't a second mistake. all is
well.
Jerry N0JRN
On 3/8/2008 8:47:17 PM, Ken Kopp ([EMAIL PROTECTED]) wrote:
Hi Jerry,
Where did the 10K resistor you put in the wrong place
-really
and whistles but my first
impression isAWESOME
72JerryN0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
of
tightening this type of nut
thanks and 72
Jerry N0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
safe to use for
radio ??
Just curious
Thanks and 73 JerryN0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
PA0PJE
- Oorspronkelijk bericht -
Van: n0jrn [EMAIL PROTECTED]
Aan: Elecraft elecraft@mailman.qth.net
Verzonden: vrijdag 12 oktober 2007 15:22
Onderwerp: [Elecraft] What is this stuff??
Hey gang:
A friend drop off some solder he didn't need. I'm having trouble
identifying it so
are now likely to short to use for RFC15.
So what say ye ole K2 guru's
Do I pull it or let it run?
thanks and 73 Jerry N0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Hey gang:
I'm just finishing the build of a KAT2 for a friend.
Manual says it takes 1.05 or better to gain all features
of the tuner. My friend tells me he has 1.04D in his rig.
My question:
What feature will he not have using 1.04D ??
Thanks a bunch:
JerryN0JRN
satisfactory using 1.04D ??
What features will be gained by upgrading the firmware ??
Thanks gang:
72 Jerry N0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
es oo JerryN0JRN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
builders alert.
That didn't help this issue. Doesn't matter which mode I'm running. Still
does it ! I am running vox when in SSB.
Anyway, just curious if anyone has any pointers.
Thanks and 73:JerryN0JRN
available that are pre-drilled ??
( I don't see then in the products list )
Just curious !
73 JerryN0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
again Don and have a great day.
73 Jerry N0JRN
On 6/2/2010 10:36:44 AM, Don Wilhelm (w3...@embarqmail.com) wrote:
Jerry,
There are holes in the top cover that are supposed to be positioned
above the attenuator resistors, and the new transverters have holes on
the bottom
N0JRN
On 6/3/2010 1:18:45 PM, Eric (gliderboy1...@yahoo.com) wrote:
I have a late-model xv144 with holes in both top and bottom panels,
connected to k3 with milliwatt drive. It runs excessively hot at 10w out
__
Elecraft mailing list
the group and see what I'm missing.
Thanks to all and have a great day:
73 Jerry N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
current info within 3
minutes 24/7.
73 to all : JerryN0JRN
Hello Don,
Thanks a lot for your effort and the informative report.
I agree with you that the PA module should survive under the test
condition. However, I am not sure whether such a continuous high working
Anybody running LP Pan with your K2???
IF so, what do you think of it
I'm considering adding it to the shack and wanted some opinions before
purchasing.
Thanks 73: Jerry N0JRN
__
Elecraft mailing list
Home
meter board, figured I
would
use it rather than drilling more holes in the back panel.
I wanted to make sure I wasn't missing something so thought I would see
what
the pro's think before proceeding.
Thanks and have a great weekend:
Jerry N0JRN
Thanks guys:
I appreciate very much your response.
I have every option available in my K2 Jack and I really didn't want to drill
another hole in the back panel.
I understand the need to keep any stray signals out of this circuit and figured
that's why you elected to use the SMA.
I just
.
I did recheck the I/O for the board and that was good.
OH Well ! One thing at a time !
72 Jerry N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Don:
A little more explanation is in order. I have the cover off the K2.
XV50 is not connected at this time. K60XV board is still plugged in.
I now have Ant 1 of the KAT2 hooked to my dummy load with watt meter in
series. Checking voltages at Q7 and Q8 reveal the collector voltage on both
Along this line !
Does the K2 have a monitor circuit built in or does one need a separate
receiver to check clarity ???
I find no reference to monitoring the transmitting voice in the K2 manual
but wanted ask anyway.
72 Jerry N0JRN
On 1/19/2010 10:01:29 AM, W0MU Mike
but wanted to be sure before proceeding.
IF that's the case, is it installed as a jumper between the base of Q7
Q8 ???
Thanks and enjoy the game: ( if your a football fan )
73 Jerry N0JRN
__
Elecraft mailing list
- Original Message -
From: n0jrn n0...@mchsi.com
To: d...@w3fpr.com
Sent: Sunday, January 24, 2010 7:53 PM
Subject: Re: [Elecraft] K2 PA repair kit
Thanks Don and all:
R50 is already a 1/2 watt and is in good shape.
I do have good desoldering equipment and now have Q7, Q8, Q11
Don:
Should I have the K60XV plugged in while testing the base voltages at Q7 and
Q8 ??
Maybe I should ask
Should have the K60XV affect the base voltage of Q7 and Q8???
I have .64 volts at the base of both transistors without the K60XV. Plug
the K60XV in and it drops the voltage to .40 at
what gives.
Thanks to all for your suggestions / help:
72Jerry N0JRN
The K60XV should not reduce the base voltage at Q7 and Q8. BUT, since it
is, remove the K60XV, put a jumper wire from pin 3 to pin 5 on J13 and
stick the leads of a small value capacitor (4.7 pF is ideal
transverters.
Command signals are via the AUX BUS and course the antenna hooks to the
transverter J1.
YES / NO ?? any suggestions ??
Thanks and 73:Jerry N0JRN
__
Elecraft mailing list
Home: http
a signal / RF generator, what brand, model and options are
you using ???
Was there a reason you choice the unit you have over some other
Just curious
73 Jerry N0JRN
__
Elecraft mailing list
Home: http
with a small footprint, good attenuation,
good coverage up to about 150 Megs,
great stability all for around $100.00 ( or less )
Kind of sounds like a TV commercial I've seen lately. LOL
Again, thanks to all:
73 JerryN0JRN
Hi Jerry:
Around here, the 'choice' seems
shack.
That will be an XV144
QRV from 160 to 144 including 60 with one rig...
Priceless !
73 all Jerry N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
??
Could you tell me the pro's and con's
Thanks and have a great day:
73 Jerry N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I see Function generators all over the auction sites.
I understand their purpose is to produce certain wave forms at different
freq's etc.
SO, how does that relate to tuning of or testing out radio's
How does a Function function ??
Thanks and have a super evening:
Jerry N0JRN
What kind of isolation transformer are you using and why did you choose the
one you have ???
Just curious
73JerryN0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
is the order of the day.
However, there are a great many other issues required to put one of these
rigs on the air with a really good signal, maximum performance and ( lord
help me ) computer control.
All things being equal !
73 Jerry N0JRN
On 2/15/2010 1:09:31 PM, Ken Kopp (k
Just wondering if I need to switch my internal tuner to something other than
AUTOin the menus when I'm on 6 meters.
I'm using the XV60 and driving it with the K60XV.
As I understand, the internal tuner is actually disabled when I go the
TRN1 / 6 mtrs and will not attempt to
tell me what your using to send CW from you PC.
Thanks and have a great day.
73 Jerry N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
??? OR
tell me how to rig this up ???
I would like to keep my paddles hooked up at the same time.
Thanks and 73
Jerry N0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
to pay someone for your cost.
Please contact me off the list.
Thanks and 73:
JerryN0JRN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
You probably should have stuck to your Cobra 29
As for getting help on the weekends...NOT
without Don !
Have a great day:Jerry N0JRN
On 4/18/2010 12:47:20 PM, Foxjazz (fo...@foxjazz.net) wrote:
All
Sorry I caused a ruckus. I understand where everyone comes
As if it's your duty to do that
NOT
I didn't realize your name was ERIC
NOT
So it wasn't up to you to point anything out !Was it ?
IF there is a lesson to be learned here, open your eyes and realize it's
you that should be learning.
73 JerryN0JRN
On 4/19
73 matches
Mail list logo