The 6400 is $2000.
Brian
KB1VBF
Sent from my iPad
> On Mar 5, 2022, at 10:52 AM, Pete Smith N4ZR wrote:
>
> Interesting question. The Flex 6700 is close to the top of the list with
> some sort of updated hardware, while the 6400 is below the original K3, and
> far below the K3 with the
That mic has a built in preamp, even though it is a dynamic mic. You might
consider that and lower your mic gain setting in the K3.
Brian Denley
KB1VBF
Sent from my iPad
> On Apr 2, 2021, at 2:39 PM, Steve Fox wrote:
>
> Do I need to make any modifications to use an MC-60A m
Sorry about that Alan.
Brian
KB1VBF
Sent from my iPad
> On Oct 8, 2020, at 10:18 PM, a...@elecraft.com wrote:
>
> On 10/8/2020 3:57 PM, Jim Brown wrote:
>>> On 10/7/2020 5:41 PM, Tom Doligalski via Elecraft wrote:
>>> I am a bit depressed about the lack of feedback from Elecraft about the K4.
It’s a electret condenser mike element and requires bias 5.6-10k resister as
Don says.
Brian Denley
KB1VBF
Sent from my iPad
> On Jul 26, 2020, at 7:40 PM, Don Wilhelm wrote:
>
> Steve,
>
> I am not familiar with that particular mic element, but --
>
> If that is
Can we get back to Elecraft stuff?
Brian Denley
KB1VBF
Sent from my iPad
> On May 2, 2020, at 4:36 PM, John Seboldt wrote:
>
> Indeed, Windows Mail is very basic and should be avoided. Thunderbird still
> holds its own and has been my client of choice as well. Many ha
Brian Denley
KB1VBF
Sent from my iPad
> On May 2, 2020, at 4:36 PM, John Seboldt wrote:
>
> Indeed, Windows Mail is very basic and should be avoided. Thunderbird still
> holds its own and has been my client of choice as well. Many handy features -
> above all, the "
Test
Brian KB1VBF
Sent from Mail for Windows 10
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
The International Amateur Radio Union (IARU) Region 1 agreed on a technical
recommendation for S Meter calibration for HF and VHF/UHF transceivers in 1981.
Why go back to 1947?
Brian Denley
KB1VBF
Sent from my iPad
> On Apr 24, 2020, at 6:30 PM, Charlie T wrote:
>
> S-mete
I bought the BG7TBL one for about $160. I worked perfectly right out of the box.
Brian Denley
KB1VBF
Sent from my iPad
> On Feb 5, 2020, at 9:16 PM, Clay Autery wrote:
>
> I use the Dual Output part from Leo Bodnar so I can set one at 10MHz, and
> the other on a different frequ
, then one should be mindful
that the result acts much like compression. In some cases, lots of compression!
Brian Denley
KB1VBF
Sent from my iPad
> On Jul 13, 2019, at 12:32 AM, Wes wrote:
>
> You do know that the K3(S) uses a slow ALC system for power control don't you?
>
> Wes N7W
> place.
>
> Wes N7WS
>
>> On 6/28/2019 11:38 AM, Brian Denley wrote:
>> I have always thought that ALC is not appropriate for power control. It’s a
>> protection system. Over use of ALC acts like compression. No?
>
I have always thought that ALC is not appropriate for power control. It’s a
protection system. Over use of ALC acts like compression. No?
Brian
KB1VBF
Sent from my iPad
> On Jun 28, 2019, at 1:11 PM, Jim Rhodes wrote:
>
> Yes Andy, I used a TS590 at field day. But this is the Elecraft
Or are you saying that you connect the K4 to your in house router through
Ethernet and then access it through WiFi? (It’s making sense to me now! Hehe).
Thanks
Brian
KB1VBF
Sent from my iPad
> On May 20, 2019, at 11:24 PM, Brian Denley wrote:
>
> Wayne:
> When you mention tha
Wayne:
When you mention that the K4 has Ethernet (which means cables to me), it must
also have WiFi if you can control with tablets, no?
Brian
KB1VBF
Sent from my iPad
On May 20, 2019, at 8:39 PM, Wayne Burdick wrote:
>> Charlie, K3ICH, wrote:
>>
>> OK, So why should I [pejorative deleted]
Well everything is installed and working very well. Now my little K2 weighs
more than my FT-950! :o)
Brian
KB1VBF
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I should also mention that the KAT2 is in the cover as well.
Brian
KB1VBF
Sent from my iPad
> On Mar 11, 2019, at 7:33 PM, Brian Denley wrote:
>
> Is the KBT2 going to fit ok with the KIO2 in the cover as well? It seems
> like the battery is pinching the KIO2 coax cable
Is the KBT2 going to fit ok with the KIO2 in the cover as well? It seems like
the battery is pinching the KIO2 coax cable pretty well.
Anyone else have both?
Thanks
Brian
KB1VBF
Sent from my iPad
__
Elecraft mailing list
Home:
Thanks for that. I never understood the Ameritron ALC instruction for my
ALS-600 so I just never used the ALC. That attached instruction was much
clearer and made sense.
Brian Denley
KB1VBF
Sent from my iPad
> On Feb 28, 2019, at 10:19 PM, Bob McGraw K4TAX wrote:
>
> This fel
..unless you build it in the ‘Twins’ configuration. Then you have the KAT2 and
KAT100 both available in the system along with the KPA100. But you need
another EC2 enclosure.
Brian
KB1VBF
Sent from my iPad
> On Dec 19, 2018, at 9:04 PM, Neil Zampella wrote:
>
> Gene ...
>
> if you were
I got my Swiss Army Knife on board a Swiss Air flight back from Amsterdam.
This was a year before 9/11 however.
Brian
Brian Denley
KB1VBF
Sent from my iPad
> On Dec 18, 2018, at 8:17 PM, Thorpe, Jeffrey wrote:
>
> Geez - I lost my Swiss Army Knife (the teeny one) to TSA at T
When I changed my 40 meter dipole from flat to inverted vee, I had to shorten
the legs as the resonance point dropped about 150 KHz.
Brian Denley
KB1VBF
Sent from my iPad
> On Dec 7, 2018, at 5:07 PM, Rose wrote:
>
> It's unfortunate that there's not enough room on the
Is this the Tim Allen reflector? :o)
Brian Denley
KB1VBF
Sent from my iPad
> On Nov 20, 2018, at 7:45 PM, Fred VE3FAL wrote:
>
> In my years in the radio and electronics hobby I have learnt that the magic
> smoke wants out as well
>
> Fred
> VE3FAL
>
> Sent f
Any issues adding this option to a K2/100 set up in the ‘twins’ configuration?
( KPA100 and KAT100 in separate EC2)
Thanks
Brian
KB1VBF
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Rod:
Correct. Hc05 is Bluetooth 2.0. The Hm10 is BLE.
Brian
KB1VBF
Sent from my iPad
> On Jun 19, 2018, at 9:22 PM, Rod Hardman wrote:
>
> Running a similar configuration for field Day with KX2, FT8 and a Piglet.
> It’s a great device and integrates With Pignology’s excellent Hamlog
Scott:
Get some magnification aid: binocular microscope, magnifying lamp, etc. Some
of those parts are pretty small and solder joints need to be inspected. Good
lighting is a must as well as an anti static mat.
Brian
KB1VBF
Sent from my iPad
> On Jun 15, 2018, at 2:14 PM, hawley, charles j
Sounds like the current Flex and Maestro.
Brian Denley
KB1VBF
Sent from my iPad
> On Feb 6, 2018, at 4:17 PM, Joseph Trombino, Jr <w...@bellsouth.net> wrote:
>
> Howdy Gang.
>
> My prediction for a new Elecraft product is the K4.
>
> A full sized/featured 160M-6M SD
Most fun I had in a long time. I was kinda sad when I completed to kit.
Brian
KB1VBF
Sent from my iPad
> On Jan 26, 2018, at 6:16 PM, Wayne Burdick wrote:
>
> Who would spend 30 hours+ building an Elecraft K2? Well, me, for one.
> I built the very first K2, not long after
My old Kenwood R-5000 receiver (1990?) also does this.
Brian
KB1VBF
Sent from my iPad
> On Jan 2, 2018, at 9:28 AM, Ryan O'Connor wrote:
>
> Oh man! That’s awesome!
>
> Ryan
> KM4ZZW
>
> Sent from my mobile device. Expect strange words and horrendous misspelling.
>
There were over 55,000 R-390A receivers built. Not sure how many non-A units
were made.
Brian
KB1VBF
Sent from my iPad
> On Nov 7, 2017, at 7:56 PM, Walter Underwood wrote:
>
> We know that the K3 sold nearly 10,000, so add in the K3S sales, and that is
> more than
Or you can use the ‘twins’ configuration of the K2/100: with the KPA100 and
the KAT100 in a separate EC2, you have a 100 watt rig with a 100 watt tuner.
Unplug the K2 from the EC2 and you have a 20 watt QRP rig with a 20 watt tuner.
It’s that easy.
Brian
KB1VBF
Sent from my iPad
> On Sep
The HRO 500 was my dream receiver as a young guy but unaffordable for a
teenager. That one had a digital display and was all solid state. Around 1967
or so. The old building that housed the National Radio plant is still there
about a mile from where I live.
Brian Denley
KB1VBF
Sent from my
I agree on the Koss. It cost me less than $40 and audio reports are all good.
BTW, I also like my old Astatic 10DA on SSB.
Brian
KB1VBF
Sent from my iPad
> On Jun 11, 2017, at 3:55 PM, Joe Subich, W4TV wrote:
>
>
>> On 6/11/2017 2:45 PM, kevino z wrote:
>> Although
Bob:
I actually need the preamp with some mics, especially the dynamics I don't
have a K3. My K2 doesn't have much mic gain. My other rigs do.
Brian
KB1VBF
Sent from my iPad
> On Jun 11, 2017, at 9:29 AM, Bob McGraw K4TAX wrote:
>
> On Jim's points, I fully agree.
Agreed Jim but I haven't spent much money on any of the mic stuff and I also
used a cheap ($40) headset rather frequently. I do, however, prefer the
dynamic mics. The condensers that I have tried seem to pick up way too much
background noise.
Brian
KB1VBF
Sent from my iPad
> On Jun 11,
on the phantom power.
73s
Brian Denley
KB1VBF
Sent from my iPad
> On Jun 10, 2017, at 11:58 PM, Clay Autery <caut...@montac.com> wrote:
>
> Well, it DOES take some fiddling to get it all the way it needs to be.
> First thing is to make sure it is set for Cardoid and not OMNI... Th
Tried both condenser and dynamic. I have settled on the dynamic (mxl bcd-1) as
it picks up a lot less background sounds. The condensers work very well but
even pick up my wife talking the the dog downstairs! I do use a noise gate and
preamp.
Brian
KB1VBF
Sent from my iPad
> On Jun 10,
Damn! I was hoping it was the s...
Brian
KB1VBF
Sent from my iPad
> On May 5, 2017, at 1:15 PM, Eric Swartz - WA6HHQ, Elecraft
> wrote:
>
> LDMOS.
>
> 73,
> Eric
> /elecraft.com/
>
>> On 5/5/2017 9:06 AM, wa4fom via Elecraft wrote:
>> Any word on the transistors
Agreed. While I understand surface mount components have made kits harder to
support, building the K2 was some of the most fun I have had in ham radio.
Brian
KB1VBF
Sent from my iPad
> On May 2, 2017, at 8:11 PM, Harry Yingst via Elecraft
> wrote:
>
> Hopefully
nty DM09dn
>
>
>
>> On 4/20/2017 8:20 PM, Brian Denley wrote:
>> Let's see: the ALS-1306 is $2800 without a tuner for price comparison for a
>> 1500 watt solid state amp, but the PowerGenius is $7000. Prom
Correcting myself: the ALS-1306 is only 1200 watts.
Brian
KB1VBF
Sent from my iPad
> On Apr 20, 2017, at 11:20 PM, Brian Denley <b.den...@comcast.net> wrote:
>
> Let's see: the ALS-1306 is $2800 without a tuner for price comparison for a
> 1500 watt solid state amp, b
Let's see: the ALS-1306 is $2800 without a tuner for price comparison for a
1500 watt solid state amp, but the PowerGenius is $7000. Prometheus is even
higher.
Brian
KB1VBF
Sent from my iPad
> On Apr 20, 2017, at 8:54 PM, charlie carroll wrote:
>
> well, and then
Both brilliant men but I have to say that I enjoyed Feynman's lectures more.
Susskind is tougher for me to listen to.
Brian
KB1VBF
Sent from my iPad
> On Apr 16, 2017, at 3:38 PM, Phil Hystad wrote:
>
> Yes, off topic but then my interest in Mathematical Physics comes
There are a lot of K2s out there...
Brian Denley
KB1VBF
Sent from my iPad
>> On 02/12/2017 03:28 PM, Ray Sills wrote:
>> Not to rain on anyone’s parade, but I’d wager you would need at least
>> several hundred, maybe thousands more serious buyers, for it to be
>> financi
I'd love a matching panadaptor kit for my K2 !
Brian Denley
KB1VBF
Sent from my iPad
> On Feb 12, 2017, at 3:11 PM, Kevin - K4VD <ke...@k4vd.net> wrote:
>
> Hey Harry... I hope you don't mind if I toss another idea out there. It has
> to do with a conversation going on in anot
I any case I do have a spare Rework Eliminator set if you want it.
Brian Denley
KB1VBF
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Mike:
I like it! I didn't think the DSP was addressable. How do I get a copy to try
it out? I have Win7 and OSX here.
Thanks
Brian Denley
KB1VBF
Sent from my iPad
> On Dec 24, 2016, at 1:44 PM, Mike Markowski <mike.ab...@gmail.com> wrote:
>
> I had trouble remembering
Thanks to all for the explanations.
Brian Denley
KB1VBF
Sent from my iPad
> On Dec 18, 2016, at 8:46 AM, brian <als...@comcast.net> wrote:
>
> Expectations may be too high.
>
> All these WWV methods assume there is no Doppler shift present on the WWV
> signal.
Fred, Don:
I ask because I am curious. On any older receiver, calibration at 20 MHz would
not guarantee cal below that ( or at any other frequency ). One could be 5 hz
high at 30 MHz but 10 hz low at 7 MHz. Why is the K3 different?
Brian Denley
KB1VBF
Sent from my iPad
> On Dec 17, 2
Same here.
Brian Denley
KB1VBF
Sent from my iPad
> On Dec 6, 2016, at 9:15 AM, Russ Tobolic <eru...@att.net> wrote:
>
> The Koss SB45 has been working great for me and cheaper than the CM500. You
> can get them on Amazon for less than $30. Russ, N3CO
>
>
How's the performance? Anyone try one?
Brian
KB1VBF
Sent from my iPad
> On Nov 2, 2016, at 4:24 PM, Phil Wheeler wrote:
>
>
> Yes, from Oct 18; perhaps this is it:
>
> -
>
> Hi,
>
> beware of purchasing the IF Crystal filters on eBay...
>
>
Nice work Paul.
Brian
KB1VBF
Sent from my iPad
> On Sep 30, 2016, at 10:41 AM, Radiobeamer wrote:
>
> Hi All,
>
> Firstly, thanks for all of your help. I checked the RFCs on the SSB board
> as per Steve's suggestion and they were OK, although my problem was quite
>
Plugging any iPad into a powered USB plug will actively charge the iPad
batteries.
Brian
KB1VBF
Sent from my iPad
> On Sep 15, 2016, at 10:40 AM, Fred Moore wrote:
>
> Michael, I installed iSDR and ordered to lightning to USB adapter from
> apple, it will be here tomorrow..
Still have my Heathkit ET-3400 and ETA-3400. Learned 6800 assembly language on
that pair before moving up to a OSI C1-P. It would be great to see Heathkit
back to something fun. I was bummed when my K2/100 rig was finished.
Brian
KB1VBF
Sent from my iPad
> On Aug 9, 2016, at 7:08 PM, Lewis
I use the Koss SB45 headset. Works very well.
Brian Denley
KB1VBF
Sent from my iPad
> On May 26, 2016, at 10:14 AM, Mike Harris <mike.har...@horizon.co.fk> wrote:
>
> Hi,
>
> If I remember correctly the Koss SB45 headset has been offered as a suitable
> subs
Made the same mistake. You need both power cables hooked up: one to the KAT100
and one to the K2. You can use a 'Y' cable to power both.
Brian
KB1VBF
Sent from my iPad
> On May 25, 2016, at 8:47 PM, mjpilgrim wrote:
>
> I recently purchased a used KAT100. Not sure
Ted:
You might look into building the K2/100 in the 'Twins' configuration. To
switch from 100 watts to qrp just requires disconnection the power amp box.
This configuration allows the KAT2 to be used along with the high power tuner.
I built mine that way and it works very well.
Brian
Or buy a microphone adaptor on EBay. You can find any type you need there.
Brian
KB1VBF
Sent from my iPad
> On Feb 12, 2016, at 7:47 PM, Bill wrote:
>
> Rewire the mic plug - just remember it is - from then on - only to be used on
> your K3. It is a 10 minute job - very
> Microsoft fixed a whole lot of things like an incredibly bad GUI from Win8
> and has made it easier to roam around and find things.
>
> 73,
> Barry
> K3NDM
>
> -- Original Message --
> From: "Brian Denley" <b.den...@comcast.net>
> To: "
My i7 iMac runs Windows 7 as well as OSX. With 32 Gb of memory, I can run any
Windows or Apple applications. I don't have a K3 but the iMac runs my K2 and
FT-950 applications with no issues whatsoever. I can upgrade to Win 10 for
free but I dislike it very much.
Brian
KB1VBF
Sent from my
Again I definitely want a set. I will pay up front if you need the money first.
Brian Denley
KB1VBF
Sent from my iPad
> On Nov 21, 2015, at 7:50 PM, Doug Shields <w4...@comcast.net> wrote:
>
> Hello everyone,
>
> I wanted to give everyone an update on the K2 Mi
Looked but I only have a couple of spare Rework Eliminator card sets if anyone
needs one.
Brian Denley
KB1VBF
Sent from my iPad
> On Nov 10, 2015, at 12:36 PM, Reuben Popp <reuben.p...@gmail.com> wrote:
>
> Hey all,
>
> In light of my recent question regarding MAB boa
I'm interested.
Brian Denley
KB1VBF
Sent from my iPad
> On Nov 4, 2015, at 5:55 PM, Doug Shields <w4...@comcast.net> wrote:
>
> Rueben,
> I brokered the last bunch of MAB boards. All have been sold. If there
> is interest, we can make another run of boards. I thi
I would like one as well if you have enough.
Brian KB1VBF
Brian Denley
KB1VBF
Sent from my iPad
> On Nov 4, 2015, at 6:58 PM, Reuben Popp <reuben.p...@gmail.com> wrote:
>
> Hi Byron
>
> I would like at least one at the bare minimum however if you have a minimum
> order
I agree with Don as well here. I use a Behringer Shark DSP110 which has both
balanced XLR and 1/4 inch mono inputs and outputs that can be set to line or
mic levels. It also provides a noise gate and mic gain if you need it. You
can stay balanced as far as you want. It was ~$50 used.
Brian
I built this one a few years ago and it's been terrific:
http://www.w8zr.net/multicontroller/index.htm
Brian
KB1VBF
Sent from my iPad
> On Sep 13, 2015, at 2:12 PM, Yngvi (TF3Y) wrote:
>
> Some off-list correspondence with Mel K6KBE and Brian K3KO made me realize
> that the
I'm with Chris. I like knobs too but touch screens are here to stay.
Brian
KB1VBF
Sent from my iPad
> On Sep 3, 2015, at 9:57 AM, Chris Hallinan wrote:
>
> I'll add my $0.02. I'm not a huge fan of touch screen for the same reasons
> John mentions. However, I would
Jim:
Don't electrets have to be powered (voltage applied) where dynamics do not?
Brian
KB1VBF
Sent from my iPad
On Aug 16, 2015, at 8:34 PM, Jim Brown j...@audiosystemsgroup.com wrote:
For example, Yamaha's own description of the CM500 called it a dynamic mic,
while it definitely an
I do but still like my old 28s
Brian
KB1VBF
Sent from my iPad
On Aug 4, 2015, at 2:57 PM, Phil Wheeler w...@socal.rr.com wrote:
$73.38 at Amazon now, it appears.
73, Phil W7OX
On 8/4/15 10:54 AM, Charles Yahrling wrote:
Recently sprung for a 50G after perusing vids at:
That was great! Thanks for sharing.
Brian
KB1VBF
Sent from my iPad
On Jul 9, 2015, at 4:17 AM, Doug Turnbull turnb...@net1.ie wrote:
Dear OMs and Yls,
This one was sent me by Barry, W5GN. I think it portrays some of the
magic which brought many of us into Ham Radio. You might
How does the K2 get it's power when only the high current supply is connected?
I ask because sometimes my K2 doesn't - unless I connect a supply to the K2
directly. Is it through the KIO2?
I also notice that when the power is lower the 11 watts, the SWR lights on my
KAT100 do not light - but
Problem solved. The K2 tune mode was limiting me to 20 watts (embarrassed).
Once past that I get high power like I expected.
Thanks anyway!
Brian Denley
KB1VBF
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net
You should have soldered them in 'as is'.
Brian Denley
KB1VBF
Sent from my iPad
On Apr 22, 2015, at 10:49 AM, Thomas Skinner tom.n...@gmail.com wrote:
As I prepare to build my second k2, my mind drifts back to the hours I spent
with the little ceramic caps.
They all had the bonding
What is it
Brian
KB1VBF
Sent from my iPad
On Apr 3, 2015, at 4:47 PM, John Seney w...@me.com wrote:
Best,
John Seney
603 785-2413
www.wd1v.com
Begin forwarded message:
Date: April 3, 2015 at 1:25:41 PM EDT
From: Elecraft Shipping shipp...@elecraft.com
Reply-To:
Ken and Don:
I am interested in this as well. My KAT100 is complete in the EC-2 and I just
started the KPA100 build today. I'm sure I have a few spare toroid cores
around here. How do I tell if they are the ones specified by Don?
Brian
KB1VBF
Sent from my iPad
On Mar 26, 2015, at 7:57 AM,
Nice programs for the K2! I hope he finishes the filter settings program.
That looks very handy.
Brian Denley
KB1VBF
Sent from my iPad
On Mar 8, 2015, at 4:39 AM, Sverre Holm (LA3ZA) la...@nrrl.no wrote:
I just wanted to remind the list of the AB3AP software found on
http://udel.edu/~mm
is in this model).
There were some K2 mods related to the SSB bandwidth, but these were not so
much audio, if I understand the question -- though they would impact the
audio.
73, Phil W7OX
On 2/9/15 8:33 PM, Brian Denley wrote:
George et al:
Did Elecraft ever adopt these (or any other) K2 SSB
the question -- though they would impact the
audio.
73, Phil W7OX
On 2/9/15 8:33 PM, Brian Denley wrote:
George et al:
Did Elecraft ever adopt these (or any other) K2 SSB audio changes?
Brian
KB1VBF
Sent from my iPad
On Feb 9, 2015, at 10:32 PM, George Winship, NC5G gwwa5...@hotmail.com
George et al:
Did Elecraft ever adopt these (or any other) K2 SSB audio changes?
Brian
KB1VBF
Sent from my iPad
On Feb 9, 2015, at 10:32 PM, George Winship, NC5G gwwa5...@hotmail.com
wrote:
Thanks for posting this, Ray. I also was getting those kind of reports on my
K2. I was able to get
setting set on Auto. I believe that if the K2 detects the
KAT100 it will use it instead of the KAT2.
Mike
KI0HA
On 1/3/2015 23:42, Brian Denley wrote:
I am building a KAT100 and KPA100 in an separate EC2 housing. There used to
be some websites with details on this arrangement but I
of the KIO2, the computer
connection part of that connector will not be functional when mounted in the
EC2 enclosure. Computer communications must be from the KIO2.
73,
Don W3FPR
On 1/4/2015 12:42 AM, Brian Denley wrote:
I am building a KAT100 and KPA100 in an separate EC2 housing
is only
functional when the KPA100 is mounted on the base K2 (with the external
mounting, there are no TXD and RXD signals sent to the KPA100).
So you get your computer communications from the KIO2, and not from the
KPA100.
73,
Don W3FPR
On 1/4/2015 6:08 PM, Brian Denley wrote:
Don
Jim:
Are you planning to sell kits with pcbs?
Thanks
Brian KB1VBF
Sent from my iPad
On Jan 3, 2015, at 11:49 AM, n...@juno.com wrote:
I picked up some more parts, enough to make a few (10) more Bluetooth
serial interfaces.
These are designed for the K2/KIO2, but can be used with K3 or
I am building a KAT100 and KPA100 in an separate EC2 housing. There used to be
some websites with details on this arrangement but I can no longer find them.
As I understand things, the KPA100 / KAT100 will operate from the KIOS cable
but do I need to disable my KAT2?
Thanks for any advice.
Great work Dave! That's terrific.
Brian KB1VBF
Sent from my iPad
On Nov 27, 2014, at 5:02 AM, David Anderson gm4...@yahoo.co.uk wrote:
For decades I used a homebuilt LED shack clock using a GI clock chip
AY5-1224. It used the mains frequency for time keeping so the long term
accuracy
I'm interested. Nice idea!
Brian KB1VBF
Sent from my iPad
On Jul 25, 2014, at 6:00 PM, John Cooper w...@gt.rr.com wrote:
Very nice! My thing is I'm using that port for the kat100 tuner. If it could
be wired directly to kpa100 serial and left inside the k2/100 that would be
perfect.
I also have one of their fan dipoles: full size 40, full size 20 with coils and
more wire on the ends that gives me shortened 80. Excellent quality! Great
price.
Brian KB1VBF
Sent from my iPad
On Jun 27, 2014, at 6:16 AM, Gerry leary gerrylear...@icloud.com wrote:
Thanks very much for
Engineering was metric (MKS) in the late 60s when I got my degree. Sure we did
some calculations with feet and inches by mostly it was meters, kilograms, etc.
Brian KB1VBF
Sent from my iPad
On Jun 22, 2014, at 11:06 PM, Dauer, Edward eda...@law.du.edu wrote:
Three of the more important
Thanks Eric. I enjoyed going through your photos!
Brian KB1VBF (jealous K2 owner)
Sent from my iPad
On Jun 6, 2014, at 12:41 AM, Eric Ross e...@evross.com wrote:
I did a photo log of my assembly of the K3 (S/N 8312) this last month. I
sure enjoyed the build.
No your history is not correct. The apple II was available by at least '78
using apple DOS. A few years later MSDOS was created out of desperation by MS
when IBM ( for the upcoming IBM PC) wouldn't buy their languages ( MS' only
product) unless it came with an operating system, something MS
The Timewave DSP-599zx also has a similar stereo panoramic feature.
Brian KB1VBF
Sent from my iPad
On Apr 2, 2014, at 8:04 PM, Don Wilhelm w3...@embarqmail.com wrote:
The K3 had it first - try setting AFX MD to BIN.
73,
Don W3FPR
On 4/2/2014 7:53 PM, Randy Farmer wrote:
I
Tom:
Please add me to those interested if you order another batch.
Brian Denley
KB1VBF
Sent from my iPad
On Mar 19, 2014, at 5:59 PM, Thomas Taylor li...@comcast.net wrote:
On Sun, 16 Mar 2014 11:46:19 -0700
Thomas Taylor li...@comcast.net wrote:
On Sun, 9 Mar 2014 17:50:11 -0700
Thomas
Sent from my iPad
On Mar 14, 2014, at 2:30 PM, Stan Grigaliunas sgrig...@columbus.rr.com
wrote:
I have my K3 hooked up to the AL600 and it works great. Now I would
like to add the auto band switching. Has anyone done this and how does
it work out? Did you home brew the cables or is
Stan:
Use the ARI-500. This guy builds specific custom cables for your setup:
http://www.stores.ebay.com/id=13270308
I just ordered one for my FT-950 and ALS-500 / ARI-500.
Brian KB1VBF
Sent from my iPad
On Mar 14, 2014, at 2:30 PM, Stan Grigaliunas sgrig...@columbus.rr.com
wrote:
I have
Nick:
I like it!
Brian KB1VBF
Sent from my iPad
On Feb 19, 2014, at 7:29 PM, Nick Garner nwgar...@gmail.com wrote:
Hi Bill and everyone else,
Following up on this email, I got the prototype boards and and assembled
one and it's working like a champ. Here's a demo video of what I'm calling
My favorite is the D-104 base with the Astatic 10-DA dynamic head. Sounds very
nice.
Brian KB1VBF
Sent from my iPad
On Jan 28, 2014, at 12:49 AM, Hank Garretson w...@arrl.net wrote:
On Mon, Jan 27, 2014 at 5:29 PM, Don Wilhelm w3...@embarqmail.com wrote:
The D-104 is still a great
DON:
Does your bug have a stereo jack?
Brian KB1VBF
Sent from my iPad
On Nov 6, 2013, at 11:21 PM, haircut...@verizon.net
haircut...@verizon.net wrote:
Hello folks,
built my k2 around this time last year. And with the help from Don (w3fpr).
got it working like gang-busters. Been
Nice!
Sent from my iPad
On Aug 20, 2013, at 9:36 PM, Don Wilhelm w3...@embarqmail.com wrote:
Hi,
Eric and Wayne have offered a 50% discount on a new KPA100 and KAT100-2 for
this project -- Thank you Elecraft. I will be doing the building at no cost.
We have 2 solid contributions of
I have a Bencher paddle he's welcome to.
Brian KB1VBF
Sent from my iPad
On Aug 20, 2013, at 9:57 PM, Buddy Brannan bu...@brannan.name wrote:
Unfortunately, I can’t contribute just now (too much month, you know), but
definitely want to help as well. I love that he’s interested in learning
I may be in the minority but I would like another high end kit that will
provide as much fun and satisfaction as the K2 gave me.
Brian KB1VBF
Sent from my iPad
On Aug 19, 2013, at 10:03 PM, george fritkin georgefrit...@yahoo.com wrote:
Perhaps the next new thing isn#x27;t a thing but a new
Brian:
Is that with the crystal element or did you replace it?
Brian KB1VBF
Sent from my iPad
On Aug 15, 2013, at 5:20 PM, Brian North br...@chirpytom.plus.com wrote:
Hello Steve. (K6SAB) and all those great, helpful Elecrafter's, both builders
and users alike.
I certainly operate my
1 - 100 of 144 matches
Mail list logo