Re: [Elecraft] K2 rework eliminators - mic board

Floyd, I just did some snooping around their site and found this under contact us, http://www.unpcbs.com/us/#contact. Hope you find one. I built my K2 with both the unpcbs Rework Eliminator and the IMA. Makes life a lot easier. Gary On Sun, Jul 26, 2015 at 5:35 AM, Floyd Sense fl...@k8ac.net

Re: [Elecraft] What is (Edit Power On Banner) ???? on my KX3

Whatever you want. I put in my name and call. It will scroll by when you turn on the rig. On Wednesday, May 29, 2013, Russ Pakulski wrote: I see Edit Power On Banner, in the configuration menu. What is this banner thing going to do? What do I put in it? Thanks Russ K9VON KX3 # 4049

Re: [Elecraft] KX3 Battery Holder and Batter Removal

I took this opportunity to install ribbons on mine, too. Was certain it was only a matter of time until I gouged a battery case. I'm also convinced the problem is more that the screw holes are not countersunk than screw length. Gary On Saturday, January 19, 2013, Phil Hystad wrote: Rich,

[Elecraft] [KX3] [KXBC3] Fresh Charge Depleted

I just installed the KXBC3 in my KX3 SN 460. The batteries are Sanyo Eneloop XX 2400 mAH rechargeable NiMH batteries. I had charged them one time before installing on a NiMH specific charger. There was maybe a few hours of use on them. They were run down to the point where the rig shut down. As

Re: [Elecraft] [KX3] [KXBC3] Fresh Charge Depleted

, Gary KJ7RT Sun City, AZ Fists #14460 NAQCC #3709 On Thu, Nov 29, 2012 at 2:06 PM, Gary Marklund gary.kj...@gmail.com wrote: I just installed the KXBC3 in my KX3 SN 460. The batteries are Sanyo Eneloop XX 2400 mAH rechargeable NiMH batteries. I had charged them one time before installing

Re: [Elecraft] Ultimatic keying

Me too! Gary KJ7RT Sent from my iPad On Aug 12, 2012, at 10:55, Erik Basilier ebasil...@cox.net wrote: I too support the request to add Ultimatic to Elecraft rigs. I don't have the fine motor control of my fingers required to make use of iambic features. I treat the dual paddles the same as

Re: [Elecraft] random wire and the KX3 ATU

I think it was Eric who wrote a bit ago that an 84 foot wire could be matched on 160 to 10 meters. If I select that length for my KX3 kit, will I need a separate Counterpoise for each of these bands? 73 Gary KJ7RT Sent from my iPad On Jun 27, 2012, at 13:10, Mike WA8BXN hubb...@hotmail.com

Re: [Elecraft] random wire and the KX3 ATU

antenna length - as I recall, it is 86 feet for the radiator and 17 feet for the counterpoise wire. 80 through 10 meters is good, and the KX3 tuner will match it easily. 73, Don W3FPR On 6/27/2012 7:33 PM, Gary Marklund wrote: I think it was Eric who wrote a bit ago that an 84 foot wire

Re: [Elecraft] SSB QRP

Wayne, How high is that antenna? 73 Gary KJ7RT Sent from my iPad On Apr 17, 2012, at 13:08, Wayne Burdick n...@elecraft.com wrote: Hi Ron, If an SSB station is strong, it's likely they'll hear you with lower power. Consider an S-9 SSB signal with low band noise, from a station

Re: [Elecraft] K3 For Sale on Ebay - Scam

I just reported the listing to eBay. Don't expect it to be there long. 73, Gary KJ7RT Sun City, AZ Fists #14460 NAQCC #3709 On Tue, Feb 28, 2012 at 4:10 PM, Robert Dorchuck W6VY w...@yahoo.comwrote: Beware of item #170792771430 on eBay. Same old scam of contact me direct. It is a K3

Re: [Elecraft] Yamaha CM500 Headset

Try www.samash.com They have them for $44.95. Don't know if they ship to the UK. Good company. I bought my second CM500 from them. Gary -- 73 KJ7RT Sent from Gmail iPAD2 __ Elecraft mailing list Home:

Re: [Elecraft] Off Thread Warning

The listings both say the photographs are stock images. 73, Gary KJ7RT Sun City, AZ Fists #14460 NAQCC #3709 On Wed, Nov 9, 2011 at 9:58 PM, Merv Schweigert k...@flex.com wrote: Looking at Ebay just now and there are two new K2 radios, both listed with the same serial number and both

Re: [Elecraft] [K2] KXV60 - Cannot initiate channel scan

OOPs, that should have read K60XV. Gary KJ7RT Sun City, AZ Fists #14460 NAQCC #3709 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] [K2] KXV60 - Cannot initiate channel scan

I have installed the KXV60 into my K2 and am able to receive with it. I have placed the five 60 meter channels into memory locations 1 through 5. When I follow the instructions for setting up channel hopping I'm unable to bring up the channel scan option in the rates parameter of the secondary

[Elecraft] [K2] KXV60 Transverter In and Out connectors - BNC v. RCA

I am about to install the KXV60 in my K2 (10W) and need to make the connector decision. My preference would be the BNC connectors, but would like to know if there are any considerations beyond personal preference. Thank you, Gary KJ7RT Sun City, AZ Fists #14460 NAQCC #3709

Re: [Elecraft] [K2] KXV60 Transverter In and Out connectors - BNC v. RCA

Thank you for your comments. You have convinced me to go with the RCAs. 73, Gary KJ7RT Sun City, AZ Fists #14460 NAQCC #3709 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: