Anyone have an idea of just how much power the T-R sw. in the
KPA100 would handle over the 100 watts it is handling . 300 -400 watts?
ThanksGilK8EAG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
I have for sale a KAF2. C19 has been padded with both fixed and a
variable capacitor so as to set the 32.768 KHz xtal to obtain precise
time. Battery still good , checks at 3.042 VDC.
Asking $55.00. Will ship CONUS.
Gil K8EAG
If interested please contact off
Many thanks to all that replied to my odd request for info.
Thanks go to: 4dgh,4nn,1rgb,0ve,0ukk,7pm,1euy and 3zvt. And of
course to any I may have missed.
Thanks again GilK8EAG
___
Elecraft mailing list
Post to:
I have an odd request. Any one who has such a key ,could you
please tell me the thickness of the base. Please reply directly.
Thank youGil K8EAG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
An excellent product. Try music stores where they sell
instruments, amps etc. I have used Caig for years and have had excellent
results. Great for noisy pots , switches etc.
73Gil K8EAG
On Sun, 8 Jan 2006 22:09:51 GMT [EMAIL PROTECTED] [EMAIL PROTECTED]
writes:
Since Elecraft is coming out with a high power linear I am
wondering if they also have plans for a compatible tuner.
GilK8EAG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the
Does any one know the output of the MD2 mic in dB? It drives my
K2 just fine but am thinking of another mic setup.
Thank youGil K8EAG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
I can give you some practical experience if you so choose. I live
near Ovid which is not too far from Gaines. Remember the DSP is an audio
device and a strong signal will push the AGC up. However I am able to
copy through some very strong signals with the notch engaged. We have
some great
Wonder if anyone has tried the KAT100 at higher wattages. I have
often thought about that possibility. Say 300 watts or so.
Gil K8EAG
wayne burdick wrote:
We've actually tested these relays at a 3:1 SWR at
1 KW.
Now you've done it :-)
--
73,
Vic,
Hi fellows. Can't manage to communicate between computer and K2.
Through control program or HyperTerminal verified that serial port is
functional on the computer ( Win XP ).
Can hear Q1s signal loud.
Here are some voltage measurements made this morning.
U1-1 14.12
My thanks to Don Wilhelm and Jack Brindle.
Yep, it turned out to be a short that was pulling J1-2 to ground.
I had a couple of .01 caps and so cut them loose ( C3 C6 ) . But still
shorted. New Max1406 coming from Elecraft. After removing the IC the
negative voltage on pin 8 was
Hi fellows. Can't manage to communicate between computer and K2.
Through control program or HyperTerminal verified that serial port is
functional on the computer ( Win XP ).
Can hear Q1s signal loud.
Here are some voltage measurements made this morning.
U1-1 14.12
Does the following have some real meaning or is it simply an
illustration?
Gil K8EAG
K7C Bulletin - Oct 1st
3) Follow instructions. If the K7C op says 200 to 205, you probably
won't get in the log at 207 or 198.
___
I am selling my K2/100 S/N 2310.
It has all the updates with the exception of the audio and cw
keying.
Includes KNB2,KAF2,K160M and KSB2. Also harness for KIO2 for the
KAT100, XV and PC.
An added feature is the K6XX SMD visible LED CW indicator.
All of the
I am selling my K2/100 S/N 2310. But keeping my S/N 800
It has all updates with the exception of the audio and cw keying.
Includes KNB2, KAF2, K160M, KSB2 and KAT100. Also harness for
KIO2 for KAT100, XV, and PC.
An added feature is the K6XX SMD visible LED CW
I finally got around to reading this review and believe that the
last 2 paragraphs say it all.
Gil K8EAG
On Mon, 29 Nov 2004 20:54:26 EST [EMAIL PROTECTED] writes:
Elecrafters,
For those who are ARRL members, you can see the review at the
Members Only
web page
Transverter is set up for use with K2/100. Built from manual
11/7/03 rev B.
Adaptor for N to UHF included.
I will ship and insure Con USA.
Price is $400.00
Please contact me off list.
Thank you Gil K8EAG
17 matches
Mail list logo