Re: [Elecraft] K2 CW - relay clicks

Thanks, Don. It’s a K2/10, so I’ll do the relay touch-test. Dave K9SW > On Jul 24, 2021, at 8:40 PM, Don Wilhelm wrote: > > Dave, > > I am at a loss to tell you what is going on. The T/R switching in the K2 is > all electronic, no relays involved. > If a K2/100,

[Elecraft] K2 CW - relay clicks

, but this did not change the relay clicks. Built the probe and did the CAL FIL routine and got it back on the air successfully. S/N 100, with ATU and SSB board. It would be nice to get back to silent QSK and preserve relay life. Any suggestions appreciated! Dave K9SW

Re: [Elecraft] K2/10 serial number 100

Thanks for the background, Don. This K2 has the SSB, noise blanker, and ATU boards added in, plus an owner installed an amplifier board and socket, so it might work with the kXPA100. I haven’t begun to check on how much its been upgraded but will start that soon. 73, Dave K9SW > On Jun

[Elecraft] K2/10 serial number 100

the serial number 100 mean that this K2 could be one of the beta tester kits? Dave K9SW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] K3 output power falls

Thanks for the pointer, Fred. With the book open to p.165, plus a couple of other menu adventures, I was able to get the K3 working like it should. Don’t know how the settings were scrambled - something of a mystery. Best regards - Dave K9SW > On Nov 10, 2016, at 9:10 AM, Cady, Fred

[Elecraft] K3 output power falls

Maximum power output on my K3 dropped to 12 watts, for no discernible reason. Any handy hints about what might cause this? I haven’t yet taken it apart to check voltages, etc. Dave __ Elecraft mailing list Home:

[Elecraft] Serial port is closed

”. Do you have any suggestions for how to proceed in making a connection? Thanks, Dave K9SW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft