Dan Pressley is correctheadphone choice is personal. Being severely
hearing impaired with BTE hearing aids in both ears I found the GRADO SR
basic phones excellent. They are open back which allows the usage without
the nasty feedback from closed back. Not all phones are compatible with
hearing
Recently I purchased a KPOD from a local SK's estate. In a small zip bag
was board with a 4 pin connector on each end. On the back it is printed
"Remove to instal KPA3". In searching the parts list it says the KPA3 is a
12V Sense Mod 1N4148. On the front next to the connectors are marked J67a
and
I have been using Bob's "S" box for some time and could not be happier.
Recently I decided to replace a non Elecraft radio with mty K3s/P3 station
with a non Elecraft (brand "X")
I ran into some issues and wrote to Bob. He responded quickly, snt a new
Block Diagram and then followed with a phone
I still wonder why Elecraft a forward looking company uses a "reflector"
like mailman rather than the .io type so many others now use. Sure makes it
easier to navigate using .io
Neil N4FN
__
Elecraft mailing list
Home:
Ok, thanks.
On Sun, Jan 12, 2020 at 1:55 PM Don Wilhelm wrote:
> Neil,
>
> Sorry, but that setting is not saved over a power cycle.
> It is good to hear the Fixed Audio Output is serving you well.
>
> 73,
> Don W3FPR
>
> On 1/12/2020 1:31 PM, Neil Foster wrote:
>
Recently I added to my K 2 the Fixed Audio board now available from Dave
W8FGU. It was originally designed by Don Wilhelm W3FPR and it works
perfectly. I have noticed that when I have set up the Bar display to show
ALC so I can monitor ALC (I monitor RF with an outboard meter) that when I
shut
What a blast, I just had my first QRP FT 8 contact with K3EEI on 15 m. I
used my Elecraft K2 that had the Fixed Audio mod board available from Dave
W8FGU.
My K 2 is the basic QRP radio not the 100 watt flavor.. It was neat to make
the contact and I used my RigBlaster Advantage along with it. I am
Since my radios are not Elecraft, I use them to switch the amp between the
FLEX 64500 and the Yaesu FTdx5000
Neil N4FN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Well I just took delivery on my first Elecraft, a KPA1500 and I have to say
after 60 years in the hobby it is the slickest thing since sliced bread!.
The KPA1500 Remote display is fantasticOK now that that is said here is
the other shoe falling. I have been a LONG time member of the ARRL and
9 matches
Mail list logo
