Just saw your QRZ page. It appears that you are operating your
station remotely, so my simple suggestion obviously won't work. Hope
someone else may have the right suggestion for you!
Ron WA2EIO
On 5/30/2021 10:30 AM, James Beitchman wrote:
I think the answer is no, but I'll ask
If I am understanding correctly, you want to bypass the amp and use
low power from the K3 into the tuner in order to tune the antenna.
Does the amp have a 'bypass' switch on it? If not, then you can put a
switch in the keying line to open it when you want to bypass the amp.
If you are
, 2021, at 1:43 PM, Ron Manfredi mailto:wa2...@optonline.net>> wrote:
>
> Also here:
>
>
https://www.ebay.com/itm/collection-Marine-chronometer-847-A-Lange-Sohne/313435822886?hash=item48fa3b1b26:g:akgAAOSw309gOowL
>
> Seems they like high-end t
Also here:
https://www.ebay.com/itm/collection-Marine-chronometer-847-A-Lange-Sohne/313435822886?hash=item48fa3b1b26:g:akgAAOSw309gOowL
Seems they like high-end technical gear.
Ron WA2EIO
On 2/27/2021 1:38 PM, Grant Youngman wrote:
The eBay fraud crew is back in full force.
A couple of things to consider:
I assume you are receiving data OK?
Are you in Data A mode?
Is the computer clock accurate?
73, Ron WA2EIO
On 2/24/2021 11:22 AM, Eugene Oliva wrote:
I have not operated FT8 in a long time. Using WSJT-X. I have all
parameters set up and COM responds
I see something similar with my (non-Elecraft) amp. The amp's display
matches a Bird 43 I had connected with a 12 inch cable from the amp and
then goes into an accurate 50 Ohm dummy load. I usually do not leave
the Bird in-line, but had this set up for testing the amp when I first
got it.
Probably one of Heath's greatest 'inventions.' I also have one or two
and they do come in handy.
Enjoy the new amp!
73, Ron WA2EIO
On 12/2/2020 3:35 PM, K9MA wrote:
When assembling the KAT500 kit yesterday, I found it frustrating
trying to get the nuts started on the connector screws.
Dick,
Powerwerx is a company that sells Power Poles, but be aware that on Ebay
you might find Power Pole 'copies,' not the originals mad by the
Anderson company.
As for power ratings, yes, there are different power ratings, but the
15, 30 and 45 Amp versions all use the same plastic
Sorry, I got another group I have been watching confused with the
TX-500, which does NOT have a groups.io presence.
Ron WA2EIO
On 9/3/2020 6:24 PM, John Harper wrote:
Can you provide a link to the Groups.io page - I haven't been able to find
it.
TNX/73,
John AE5X
It is another in an ever-growing line of low-power SDR transceivers.
It is carried by Ham Radio Outlet, (they project mid-September delivery)
is FCC approved, and will have repair facilities in the U.S. There
are some video reviews of it, along with a Groups.io page, and like
almost
Thanks for all the suggestions for speakers and the advice on station
feedlines/antennas, grounding, etc. I have enough info now to follow
up on!
73, Ron WA2EIO
On 8/4/2020 12:51 AM, Reed Fite wrote:
I have had very good luck with this speaker, if you can find it. I use 3 AA
I prefer to operate without headphones, but find the audio output from
my KX-3 to be too weak to be usable, and the rigs' audio amp is not up
to driving an external speaker very well. I tried both an amplified
Motorola speaker and a small MFJ unit, but when using SSB (10-15 Watts)
at home
Try the default for speakers; set it to "1"?
Ron WA2EIO
On 5/17/2020 2:00 PM, Chuck Chandler wrote:
We are in the process of packing to move and I have to down-size the mess
on my operating desk. As part of that the K3S was moved back and forth,
and I removed the two external speakers I
Fewer power supplies (meaning the switching type) have actual terminal
bolts to use with ring connectors. If the supply doesn't have that type
of connector, then what alternatives are there to being able to use one
supply in a station that has more than one high current rig, (even if
they
Sorry, I forgot to sign the first post.
Novus plastic polish, comes in three grits/coarseness levels. You
probably need their #1, or 2 followed by 1.
https://www.novuspolish.com/
Ron
WA2EIO
On 4/14/2020 8:07 PM, Wayne Suite wrote:
I heard that you can use brasso and a soft cloth and
Novus plastic polish, comes in three grits/coarseness levels. You
probably need their #1, or 2 followed by 1.
https://www.novuspolish.com/
On 4/14/2020 8:07 PM, Wayne Suite wrote:
I heard that you can use brasso and a soft cloth and lightly apply it by
massaging to remove light scratches I
This was not used for field day! Actually, it has gotten very little
use; I haven't had the time do to portable operation, so I will continue
to use my K3s at home, but make this rig available to someone who can
make better use of it. Photos available on request.
It has the 15 watt
Did you enable mic bias?
Ron WA2EIO
On 6/17/2017 10:16 AM, Wp4cw via Elecraft wrote:
Gm all
I was able to test my CW and it works (100w). Now moving to SSB.
Mic is Mh2
Set Mic to front panel , low
I turn vox on
No out put
Can anyone let me know what I'm missing. Thank you. Ted
--
View
Have you experienced this on other bands, during casual operating since
the rig was returned to you?
I find that when I am on SSB, I tune until my ear may likes what I am
hearing , and as such, I may not be exactly on their frequency. (that
is one reason for RIT!) Also, I have found that
I agree with Don's comments on the soldering.
I am not familiar with the kit, but if you had to wind the torroid
yourself, were you sure to remove ALL the insulation from the wire ends
before soldering them to the board?
73,
Ron WA2EIO
On 6/9/2017 10:41 AM, Don Wilhelm wrote:
Is there a cable available to allow automatic band switching of this amp
from the K3s?(Or advice on how to make one up.) The amp and rig
work well together, but automatic band switching would be nice! The
only reference I have found online refers to adding pull up resistors to
the
The writer of the manual has a sense of humor. You can download the
manual, and on the last page of the "Troubleshooting" section the last
problem listed is: "Smoke comes from unit," and the solution, "Replace
the smoke...only kidding, return to dealer."
On 5/28/2017 7:15 PM, pkhjr via
I second Howie's comments on Rose's bag's quality and capability. The
LowePro is really a camera bag, and in fine Ham tradition we have
adapted it, but Rose's was designed specifically for radio work.
Ron. WA2EIO
On 5/13/2017 8:56 AM, Howard Hoyt wrote:
Hi Chris,
The CS60 LowePro case I
I still sometimes forget to _read_ the front panel display. Not quite
the same as the old way of looking at a knob pointer! But the K3s is
certainly in a different league from those old rigs.
Ron WA2EIO
On 5/1/2017 11:44 AM, Bill Frantz wrote:
Add me to the idiot group. I was operating
Carter,
I am not sure if this is what you have in mind, but I use this cable:
Hosa YMM-26. It is a Y cable that plugs into the KX3's Mic. jack, and
provides an output line for both PTT and Mic. The headset then plugs
into the earphone jack on the KX3.
On 3/11/2017 7:46 AM, Carter
here.
73,
W3FPR
On 2/21/2017 9:58 AM, Ron Manfredi wrote:
I am trying to get my head around the memory set-up on the K3. Must be
missing something.
I have set memories (and config) 0-9 as band switches, and that seems to
be OK; the last frequency I used on each band is stored in memory when
I am trying to get my head around the memory set-up on the K3. Must be
missing something.
I have set memories (and config) 0-9 as band switches, and that seems to
be OK; the last frequency I used on each band is stored in memory when I
go back there, but I put the 40 meter WWV frequency into
Following along with James' question, should the K3 be double boxed for
shipment back to Elecraft for the "migration?"
On 2/18/2017 7:12 PM, James Setzler wrote:
Greetings,
I bought my K3 as a kit and, for some reason, the finished product doesn't
fit back into the box it came in!
I have used the Elite Pro with success. The dynamic mic element
version, with bias turned OFF.
For an alternate suggestion, many use and like the (inexpensive) Yamaha
CM-500 / Koss SB-45 headset, with it's electret element.
Ron
On 1/14/2017 9:33 AM, Alex Dokic via Elecraft wrote:
Hi,
HNYto all!
Has anyone made an adapter cable to allow the MH-3 mic to be used with
the K-3? I acquired a KX3 with its mic, and a K-3 without a mic, and
would like to be able to use the same mic on both rigs.
Any wiring tips?
__
In line with the replies about a good mic to use with the K3, I have a
question. I am alternating between the Yamaha headset, (selected as the
rear mic, LOW output with bias) which works fine, and I would recommend
it . However when I want to use the MH-3, I must not only change to
the
] to turn it on and off. There are some times
when it's advantageous to be able to send CW while in SSB modes ...
VHF contest comes to mind.
73,
Fred K6DGW
- Sparks NV DM09dn
- Northern California Contest Club
- CU in the Cal QSO Party 7-8 Oct 2017
- www.cqp.org
On 10/3/2016 11:41 AM, Ron
I have been getting acclimated to my (new to me) K3 and marveling over
its many ways to customize its operation. Made some SSB contacts, and
decided to try CW.
I connected my paddle, and did some quick tests on CW. I have found
that even when I am in USB or LSB modes, keying the
33 matches
Mail list logo