Special thanks for the mode-EQ.
I boost band 8 EQ in cw by 8db. Really helps copy and seems to make NR more
effective too. Of course that stunk for SSB and required changing, a pain.
Pain is now gone. Big 73!
Steve
N4LQ
----- Original Message -----
From: "Wayne Burdick" <n...@elecraft.com>
To: "Elecraft Reflector" <elecraft@mailman.qth.net>;
<elecraft...@yahoogroups.com>; <elecr...@yahoogroups.com>
Sent: Wednesday, April 21, 2010 6:32 PM
Subject: [Elecraft_K3] K3 Beta Firmware Rev. 3.94: Enhancements to RX & TX
EQ, European FM & repeater operation, etc.
K3 beta-test firmware revision 3.94 (with DSP rev. 2.54) is now
available. See release notes below for details.
Please send any questions to k3supp...@elecraft.com. For instructions
on how to load beta firmware, see:
http://www.elecraft.com/K3/k3_software.htm
73,
Wayne
N6KR
* * *
New Features:
* SEPARATE RECEIVE EQ FOR CW MODE: To set up CW RX EQ, select CW mode,
then use MAIN:RX EQ. To set up voice-mode RX EQ, select any non-CW
mode except DATA. (Mode can be changed while in the menu.)
* SEPARATE TRANSMIT EQ FOR SSB MODE: The SSB transmit passband can now
be set up differently from AM/FM/ESSB. To set up SSB TX EQ, select USB
or LSB with ESSB off, then use MAIN:TX EQ. To set up AM/FM/ESSB TX EQ,
select AM, FM, or USB/LSB with ESSB on. (To turn ESSB on/off, tap ‘1’
in CONFIG:TX ESSB. When ON ,the “+” mode icon appears.) Also see TE
command, below.
* TRANSMIT EQ SETUP COMMAND (TE): Can be used in switch macros (or
software applications) to quickly optimize TX EQ settings for
different users or mics. For example, “TE-08+00+00+00+00+00+00+00;”
cuts the 50-Hz EQ band by 8 dB.
Changes related to European FM and Repeater Operation:
* 12.5 AND 25 KHZ VFO INCREMENTS (FOR EU REPEATERS): Added 12.5 kHz
and 25 kHz step sizes in FM mode. To specify step size, select FM
mode, then use the CONFIG:VFO CRS menu entry.
* SQUELCH-CONTROLLED 1750-HZ PL TONE: Some EU repeaters require a 1750-
Hz PL tone burst to open. Previously, an 0.5-second burst was
generated at the start of each transmission. Now, this tone is only
generated if squelch is not already open. The squelch-controlled PL
tone feature can be turned off by setting the PITCH parameter to PL
OFF. With either the PL TONE or PL OFF setting, the operator can still
do manual PL tone burst as described in the next item.
* MANUALLY CONTROLLED 1750-HZ PL TONE: The operator can now generate a
variable-length tone burst at any time while transmitting by holding
PITCH switch.
* PL TONE DEVIATION RANGE CHANGED: The deviation range for the 1750-Hz
PL tone is now 1.5 to 6.0 kHz. The default, 3.6 kHz, is about 70% of 5
kHz, as recommended for many EU repeaters.
The deviation for sub-audible tones is now stored separately and has a
range of 150-600 Hz (default 360 Hz).
Other Changes:
* Full support for P3 Panadapter. Allows very fast K3-to-P3 response
during VFO movement, etc.
* K3 Memory Editor: This revision of K3 firmware works with our new K3
Memory Editor (Not yet released. Presently PC/Windows-only, but may
eventually work on other platforms.) The memory editor will allow you
to edit frequency memories 00-99 and, if desired, per-band quick
memories (M1-M4). Each memory includes a “QSY” button, providing
convenient memory selection. Memory contents can be saved in a file
and shared with other K3 users. Further details to be posted elsewhere.
* MEMORY CHANNEL COMMAND (MC): This new remote-control command was
created in support of the K3 Memory Editor (see above). Sending an MC
command to the K3 loads VFOs from a memory (or “channel”), emulating
M>V. It can be used in switch macros. Examples: “MC080;” loads memory
#80. “MC100;” loads 160-m quick-memory M1. (For details on creating
macros, refer to K3 Utility Help or the K3 Programmer’s Reference.)
For software developers:
* See TE and MC commands, above.
* TEXT BUFFER COMMAND (TB): This is an improvement over the “TT1”
method for implementing a CW/data terminal. Returns number of transmit
characters from KY<text> packets remaining to be sent, as well as a
string containing all available characters, and RX character count.
* Fixed KY<text> problem in PSK-D/FSK-D modes: Sending packets during
the 4-second idle time was delaying transmit until end of idle time.
* Now recognizing a slashed-zero character from the PC keyboard (0xD8)
in KY<text> packets.Converted to regular zero.
* IC COMMAND: Added CONFIG:MEM 0-9 setting (byte a, bit 1).
* NOISE BLANKER LEVEL CONTROL: Added NL and NL$ commands to remotely
set DSP and IF blanker levels for main and sub receivers. Refer to the
K3 Programmer’s Reference, revision C10 or later.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Elecraft_K3/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Elecraft_K3/join
(Yahoo! ID required)
<*> To change settings via email:
elecraft_k3-dig...@yahoogroups.com
elecraft_k3-fullfeatu...@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
elecraft_k3-unsubscr...@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
