I am in the process of installing the KDSP2 on the Control Board. When the
KDSP2 is plugged into J1 and J2 the connectors do not fully mate; the board
is resting on C28, C29 and L1.
C28 , C29 and L1 are all flush mounted to the Control Board. It appears
that C28 and C29 are not contacting
I am in the process of installing the KDSP2 on the Control Board. When the
KDSP2 is plugged into J1 and J2 the connectors do not fully mate;
The spacer/hardware stackup should be determining the spacing. The
KDSP2 (not DSP) PC board has no component leads or other protrusions
where it sits
2 matches
Mail list logo