Steve,
I'm just wondering if you use RX EQ with large gain settings. As I recall, the
K3 cancels those gains with the two narrowest Width settings (i.e., 50 and 100
Hz). This might account for at least part of the large increase in gain that
you experienced when you
opened up the Width
09, 2009 2:00 AM
Subject: [Elecraft] K3: Audio Blast attack
Steve,
I'm just wondering if you use RX EQ with large gain settings. As I
recall, the K3 cancels those gains with the two narrowest Width settings
(i.e., 50 and 100 Hz). This might account for at least part of the large
increase
Today I was listening around on 40m cw and messing with the Shift and
Width knobs. I had the NR turned on. I was running the Shift up and down the
range just casually listening to the noise pitch change. Retired people have
this kind of time. I had the width down to 50 hz then I hit the FIL
Ellington n...@carolina.rr.com wrote:
From: Steve Ellington n...@carolina.rr.com
Subject: [Elecraft] K3: Audio Blast attack
To: Elecraft@mailman.qth.net
Date: Wednesday, April 8, 2009, 8:05 PM
Today I was listening around on 40m cw and messing with the
Shift and
Width knobs. I had the NR turned
Steve Ellington wrote:
... had the width down to 50 hz then I hit the FIL button
to open things back up again and that's when it happened
Steve,
Things like this should *never* happen -- our apologies. Please send me
your firmware revision numbers (use CONFIG:FW REVS) and a list of all
... had the width down to 50 hz then I hit the FIL button
to open things back up again and that's when it happened
Things like this should *never* happen -- our apologies. Please send me
your firmware revision numbers (use CONFIG:FW REVS) and a list of all
the receiver settings you
6 matches
Mail list logo