Not getting any answers from Elecraft.com...still thinking about getting new cables that aren't as thick as a garden hose!
KPAK3AUXSE Enhanced Mode. Aux Cable Set + second E850463 Aux Cable Enhanced Mode. Aux Cable set for KPA500 AND second E850463 aux cable for KAT500. AUX Cable Set incl: 15-Pin to 15-Pin DE-15 + Key Line Interrupter adapter So does the Aux Cable Set include two E850463 cables for $50 or only one E850463 and the key line interrupter? And to get two E850463 cables, you have to order two E850463 cables at $30 each? Chuck Hawley c-haw...@illinois.edu Amateur Radio, KE9UW aka Jack, BMW Motorcycles ________________________________ From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> on behalf of Jack Brindle via Elecraft <elecraft@mailman.qth.net> Sent: Friday, March 6, 2020 2:58 PM To: elecraft@mailman qth. net <elecraft@mailman.qth.net> Subject: Re: [Elecraft] Extra Protection For KPA500? One other thing to consider is that you don’t want to connect all of the pins straight through from the K3 to the KPA500. There are some conflicts that will cause problems. The Elecraft cables are set up properly with the appropriate pins cut that should not connect between the two devices. An alternative is to use a straight-through HD15-HD15 cable with the appropriate pins cut. Cutting them yourself is a pain, so we really don’t recommend that route. 73! Jack, W6FB > On Mar 6, 2020, at 12:19 PM, Bob McGraw K4TAX <rmcg...@blomand.net> wrote: > > Just order the two cables from Elecraft as it is a special wired and > configured cable. E85046 I doubt seriously if an aftermarket cable would > work. > > The manual clearly states "do not use a standard VGA cable!" > > The KAT500 manual, page 5, Fig. 1 is the correct configuration for your > application. It requires 2 of the E85046 cables. This is not the time to be > conservative or cut cost corners. You have ~$8500 in radios depending on > this. > > 73 > > Bob, K4TAX > > > On 3/6/2020 2:06 PM, Tony wrote: >> Bob: >> >> The AUX cable requirement makes sense. Can you recommend an aftermarket >> cable? I’ll need one for the KPA500 and another for the KAT500. >> >> Thanks >> >> Tony >> >> >> >> >> >> >> >> Sent from my iPad >> >>> On Mar 6, 2020, at 2:38 PM, Bob McGraw K4TAX <rmcg...@blomand.net> wrote: >>> >>> Tony et al: >>> >>> Go to the K3S CONFIG menu and PWR SET. Set the value to PER BAND. Then >>> exit this menu by pressing MENU/CONFIG. There IS NO value to set at this >>> point. Then with the KPA500 on and in OPER mode, while in RX, set the PWR >>> value on the K3S to 20 watts or what ever power you wish to drive the amp >>> with for that band. That is saved for that mode and band. Then on to the >>> next band. >>> >>> When the KPA500 is in STBY mode the power value is what is set on the K3S >>> for barefoot operation. When the KPA500 is switched to OPER then the power >>> value is what you have set for that mode and band. This does require the >>> KPA500 to communicate with the AUX cable. See page 12 Fig 3 of the KPA500 >>> manual for the configuration. >>> >>> If you have the K3S, the KPA500 and the KAT500, then see page 5of the >>> KAT500 manual, Fig 1 for the correct cables and configuration. >>> >>> As they say, it is all in the manuals. >>> >>> 73 >>> >>> Bob, K4TAX >>> >>> >>>> On 3/6/2020 1:07 PM, Tony wrote: >>>> >>>>> Tony, The Config Menu has a Per-Band power setting (PWR SET = PEr bAnd) >>>>> that will set the power output depending on the band selected. If you use >>>>> the Aux cable between the K3 and KPA500 is is fully automatic and >>>>> seamless. 73 George AI4VZ >>>> George: >>>> >>>> I must be missing something because when I select PER BAND in the config >>>> menu, there's no power setting to set. >>>> >>>> It doesn't display the power like TUN PWR does where the tune power is >>>> shown within that menu item so you can adjust it. >>>> >>>> I have to order the AUX cable, but in the meantime I'd like to use this >>>> setting with the K3S so any suggestions would be appreciated. >>>> >>>> Tony >>>> >>>> >>>> ______________________________________________________________ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:Elecraft@mailman.qth.net >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> Message delivered to rmcg...@blomand.net >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to d...@optonline.net >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jackbrin...@me.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to c-haw...@illinois.edu ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
