Pricewise, I see WRT54G routers for sale all the time at the local “Value
Village” (US: “Goodwill”) stores for about $5 to $7. Put open source DD-WRT on
them and you have a very useful device.
Kevin VE7ZD/KN7Q
> On Jan 17, 2021, at 8:43 AM, Dave B via Elecraft
For a fraction of the price of one of those Amazon things ($60 US, of
unknown repute and support.)
You could buy one of the old Lynksys Blue/Grey WRT54G routers (Well
known with lots of free expertise "out there") and re-configure it to
work as a WiFi/Wired LAN Bridge.
Generally rock solid
On Thu, Jan 14, 2021 at 4:24 PM Tim Tucker wrote:
> I plan to buy one of these to interface the K4 ethernet to my home Wifi:
>
>
> https://www.amazon.com/IOGEAR-Ethernet-2-WiFi-Universal-Wireless-GWU637/dp/B018YPWORE
That will probably work fine once programmed to connect to your WiFi Router.
I plan to buy one of these to interface the K4 ethernet to my home Wifi:
https://www.amazon.com/IOGEAR-Ethernet-2-WiFi-Universal-Wireless-GWU637/dp/B018YPWORE
On Thu, Jan 14, 2021 at 7:02 AM Bill Frantz wrote:
> It sounds like I might be in trouble since the only Internet
> access in my
Do you have a computer somewhere else? Connected to the internet? You will be
able to, I think, download the firmware, put it on a USB thumb drive, and
update the K4 from the thumb drive.
Grant NQ5T
> On Jan 14, 2021, at 10:02 AM, Bill Frantz wrote:
>
> It sounds like I might be in trouble
It sounds like I might be in trouble since the only Internet
access in my shack is via Wifi on my phone. Guess why I'm always
contesting as unassisted.
73 Bill AE6JV
On 1/13/21 at 2:37 AM, n...@arrl.net (Bob Wilson, N6TV) wrote:
Yes, you connect the K4 Ethernet port to your Router or
Yes, you connect the K4 Ethernet port to your Router or Ethernet switch,
then software updates may be downloaded on demand direct from the Internet
by tapping Fn > UPDATE and following the prompts.
73,
Bob, N6TV
K4 Field Tester
On Tue, Jan 12, 2021, 2:19 PM Joseph Trombino, Jr
wrote:
> Howdy
elecraft.com
> On Jan 12, 2021, at 2:18 PM, Joseph Trombino, Jr wrote:
>
> Howdy Gang.
>
> Just went through a preliminary introduction to the K4 doc and didn’t see
> anything abut how to load new firmware into the K4.
>
> Is this where the Ethernet port comes into play?
Yes.
Howdy Gang.
Just went through a preliminary introduction to the K4 doc and didn’t see
anything abut how to load new firmware into the K4.
Is this where the Ethernet port comes into play?
Any info appreciated.
Take care, stay healthy and enjoy.
73, Joe W2KJ
9 matches
Mail list logo