I'd like to connect the output of my K1 to a Timewave DSP-59+ but have had some difficulty. Tried connecting a 2-pin header plug to the speaker connection on the PC board and hence to the input of the DSP-59+ but regardless of how far I turn up the AF gain on the K1, the DSP fails to indicate enough "drive" and the audio sounds distorted as if it was amplified signal leakage. There is enough signal for the audio AGC on the DSP to work, however.
Advice, counsel, words of wisdom welcome. Also, thanks to Jim K4ZM for finishing and troubleshooting my K1 after I lost some fine motor skills. (motor skills returning, my CW no longer sounds like I'm sending with a loose toggle switch manipulated by my left big toe....HI!) 72, Tim ____________________________________________________________ Learning Centers - Click Here. http://thirdpartyoffers.juno.com/TGL2131/fc/BLSrjnsIpv1W0uiGtjMYMFkXOwzJZQYA3jdo1JzwBnEqDrqNkzL0FeeeECE/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
