I did the exact same thing you did Rick. Same RS cap
and AGC did not speed up as I had hoped.
Also wonder what other might have done?
73, TY, W1TF, K1 # 1423
--- Rick Dettinger [EMAIL PROTECTED] wrote:
I changed C31 on the RF board to 1uf but it still
seems very slow. When I
remove an S9
: Wednesday, April 05, 2006 12:59 PM
Subject: Re: [Elecraft] K1 AGC time constant
I did the exact same thing you did Rick. Same RS cap
and AGC did not speed up as I had hoped.
Also wonder what other might have done?
73, TY, W1TF, K1 # 1423
--- Rick Dettinger [EMAIL PROTECTED] wrote:
I changed
Tyrrell [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Wednesday, April 05, 2006 9:59 AM
Subject: Re: [Elecraft] K1 AGC time constant
I did the exact same thing you did Rick. Same RS cap
and AGC did not speed up as I had hoped.
Also wonder what other might have done?
73, TY, W1TF, K1
In practice, RF gain is rarely backed down by K2 users -- the AGC
system has a very pleasant sound and very wide dynamic range. This
could easily be achieved with the K1, too. But you could incorporate a
manual RF gain control if you wanted to. Finding a place on the K1's
front panel is another
I changed C31 on the RF board to 1uf but it still seems very slow. When I
remove an S9 siginal (50uv) it takes about 15 seconds for the S meter to
decay to one bar. I used a non polorized electrolitic cap as that is what
they had at RS. It is physically larger than the original cap but there
5 matches
Mail list logo