Re: [Elecraft] WTB: Elecraft K1 Tilt Stand

I just redesigned one I made for 3D printing. It's very close to the original. OK, closer to a blatant knockoff. The only real difference is that the design was changed to accommodate the different characteristics of 3D printing vs using the original aluminum stock. If Elecraft has no

[Elecraft] WTB: Elecraft K1 Tilt Stand

A long-shot I know, but I'm looking for a KTS1 wide-range tilt stand for an Elecraft K1. Will probably have to find some aftermarket substitute, but thought I'd ask for the real thing first. Thanks! --  Jeff, KE9V __ Elecraft mailing

[Elecraft] K1 Tilt Stand SOLD

Thanks for all the replies. Mike, W4UM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net

[Elecraft] K1 Tilt Stand For Sale

For sale is my Elecraft KTS1 Wide-Range Tilt Stand. It is in excellent condition and perfectly fits the K1. Buy mine for $25 plus shipping. Mike, W4UM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] K1 tilt stand bail build info _ one more try sorry listers

Try this and hoping this paste from a different mail client works. www.qsl.net/ve3mcf/elecraft_reflect/K1_Tilt_Stand_Alternatives.tx http://www.qsl.net/ve3mcf/elecraft_reflect/K1_Tilt_Stand_Alternatives.txt

[Elecraft] K1 tilt stand bail- how to make

This is from my own personal 'wayback' records source not evident to me with short notice. Alt #2 - "The Never Fail Cheap & Dirty K1 Bail"; (with apologies to Tom, =N0SS, and his probe) Take a piece of 15" long by 3/32 - 1/8" diameter sol=id wire (a heavy duty coat hanger works great!).

Re: [Elecraft] K1 Tilt Stand ???

Try LapWorks Laptop Legs. The grey ones are a perfect match. Alas, availability seems to be falling, and prices appear to be rapidly climbing -- I'm guessing they aren't being made anymore... - kb7psg On Sun, 31 Jul 2016, Doug Hensley wrote: Does anyone make a simple flip down

Re: [Elecraft] K1 Tilt Stand ???

When I owned a K1 my tilt stand was a length of 1" flat bar from Home depot bent in a U. It flipped up and just cleared the tuning knob to protect the front panel during transport. John K7JLT John K7JLT Doug Hensley wrote: >Does anyone make a simple flip down bail (wire

Re: [Elecraft] K1 Tilt Stand ???

Doug, None that I know of. If you have a bandsaw (or know someone who has one), I would cut a wedge from a 2x4 that is as long as the K1 is deep. That should be a better solution than a book. 73, Don W3FPR On 7/31/2016 11:38 AM, Doug Hensley wrote: Does anyone make a simple flip down bail

[Elecraft] K1 Tilt Stand ???

Does anyone make a simple flip down bail (wire stand support) for the K1 as is available for the K2 ? I'm continually tilting the K1 back using a book or similar to position the front panel for easier viewing. 1.25 to 1.5" tilt should work. TIA, Doug W5JV K1 007xx

[Elecraft] K1 Tilt Stand

Does anyone have a KTS1 tilt stand for the K1 they would like to sell? If so, please email me directly at: d...@k4eq.net. Thanks. Dale, K4EQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] K1 tilt stand

I am looking for a spare 10-32 Thumb Screw used with the KTS1 tilt stand. In my rush to get off a peak today (operating SOTA) I dropped one. Thanks, Don, NK6A __ Elecraft mailing list Home:

Re: [Elecraft] K1 tilt stand

Look in the parts list of your manual and you'll find the elecraft part number, then order one. That's why the part numbers are there! 73, Ron AC7AC -Original Message- I am looking for a spare 10-32 Thumb Screw used with the KTS1 tilt stand. In my rush to get off a peak today (operating

Re: [Elecraft] K1 tilt stand

Don, In a pinch, you can run to the local hardware store or good DIY emporium and look in the drawers for some suitable substitute with 10-32 threads. When you settle down from the current event, you can order the proper replacements from Elecraft - unfortunately, you will have to order it

Re: [Elecraft] K1 tilt stand

Don, In a pinch, you can run to the local hardware store or good DIY emporium and look in the drawers for some suitable substitute with 10-32 threads. When you settle down from the current event, you can order the proper replacements from Elecraft - unfortunately, you will have to order it

Re: [Elecraft] K1 Tilt Stand Bolt Size

In a recent message WA7CS [EMAIL PROTECTED] writes What is the bolt/screw size used to connect the tilt stand to the side panels of a K1? Look at the manual for the KTS1 stand at http://www.elecraft.com/manual/KTS1_revG.pdf 73 -- David G4DMP West Yorkshire, England, UK

Re: [Elecraft] K1 Tilt Stand Bolt Size

Thanks to the list, I've found just the right thumbscrew. Here is a link to the details: http://webpages.charter.net/crstrode/k1nuts.htm http://www.nabble.com/file/p14766469/k1nuts1.jpg http://www.nabble.com/file/p14766469/k1nuts2.jpg -- View this message in context: