RE: [Elecraft] K2, Noise Gen and Spectrogram

James, A noise source (NG1 will do nicely) and Spectrogram are all that is required (ignoring the cable to connect the K2 to the sound card input). Take a look at the K2 Dial Calibration article on my webpage http:/w3fpr.qrpradio.com for the information you seek. If you want to bypass all the

Re: [Elecraft] K2, Noise Gen and Spectrogram

Hello James, The noise generator and spectrogram will do the job! Look at the www.n0ss.net webpage and you will find the article and downloadable software including instructions! With me, it worked. Good luck, Evert, PA2KW, K2 #4836 James Kern wrote: I need to set my K2 Filters. After I

Re: [Elecraft] K2, Noise Gen and Spectrogram

Your URL seems not to work. I located your page at http://www.qsl.net/w3fpr/index.htm. Should the other work as well? On Mon, 27 Jun 2005 16:00:30 -0400, W3FPR - Don Wilhelm [EMAIL PROTECTED] wrote: Take a look at the K2 Dial Calibration article on my webpage http:/w3fpr.qrpradio.com for the

Re: [Elecraft] K2, Noise Gen and Spectrogram

James, Sometimes in addition to a noise generator and a PC with a soundcard running Spectrogram you may need to add a 600 ohm 1:1 isolation transformer between the LS output of the K2 and the PC sound card input. Perhaps I was unfortunate in that both my PC and a separate laptop had spikes