Brian,
I think Don, W3FPR, answered your question. FYI, My K2 and SSB is a fairly
early model from 2001. I did not like the bandwidth and changed it to 2.5khz
early on. I believe this was a mod from KI6XX. Don't have those notes handy.
Always got many unsolicited good audio reports for many
Thanks Don, Jim and George. I would guess that any method that shapes the
audio would have the same desired effect i.e. different mic element, equalizer,
etc.
Brian
KB1VBF
Sent from my iPad
On Feb 10, 2015, at 1:54 AM, Don Wilhelm w3...@embarqmail.com wrote:
Those mods are not 'official
Good question. I've never had any issues with my
audio reports, using the Elecraft MH2 mic; in fact
all audio reports have been positive. It sounds
like these mods are for the Proset K2 Heil
mic/headset (I'm not sure which Heil mic element
is in this model).
There were some K2 mods related
Phil:
Yeah my audio reports are fine with the MH2 as well. I'm not looking to widen
the K2 bandwidth.
Thanks
Brian
KB1VBF
Sent from my iPad
On Feb 10, 2015, at 12:57 AM, Phil Wheeler w...@socal.rr.com wrote:
Good question. I've never had any issues with my audio reports, using the
Those mods are not 'official Elecraft', but will help in reducing the
bass response of the KSB2. That is a good thing with any microphone
because the low frequency response just wastes power and does not add
much to communications quality.
It is applicable for any microphone, not just the
On Mon,2/9/2015 10:28 PM, Brian Denley wrote:
Yeah my audio reports are fine with the MH2 as well.
Nearly 10 years ago, I worked up some nice improvements to SSB TX that
added 6dB of gain to the mic circuit, which improved compression, and
tailored the frequency response to remove low end,
Thanks for posting this, Ray. I also was getting those kind of reports on my
K2. I was able to get the 1uF electrolytics but was unable to find the
0.1uF. G3RXQ was quick to respond to my email and said that a 0.1uF
monolithic could be used instead. The results are great, as confirmed by
hams I
George et al:
Did Elecraft ever adopt these (or any other) K2 SSB audio changes?
Brian
KB1VBF
Sent from my iPad
On Feb 9, 2015, at 10:32 PM, George Winship, NC5G gwwa5...@hotmail.com
wrote:
Thanks for posting this, Ray. I also was getting those kind of reports on my
K2. I was able to get
Very pleased the mods still work !
73
Stewart G3RXQ
On Sat, 20 Dec 2014 22:29:48 -, Ray Collins wrote:
Other K2 owners may be interested in this.
After getting many reports of poor quality transmit audio with my K2 (using
the Proset K2 Heil boom microphone and headset), I carried out the
I use a Heil HC4 (DX) mike element in an upgraded hand mike.
I changed the mike gain with a resistor change as per mod.
I get very good audio reports - the mike has the 2K boost and the low
end cut... built in.
I never did the SSB filter upgrade and still running stock serial number
0985 K2...
Other K2 owners may be interested in this.
After getting many reports of poor quality transmit audio with my K2 (using the
Proset K2 Heil boom microphone and headset), I carried out the modifications
described by G3RXQ which increase the lower cut off frequency of the microphone
circuit on
On Sat,12/20/2014 2:29 PM, Ray Collins wrote:
After getting many reports of poor quality transmit audio with my K2 (using the
Proset K2 Heil boom microphone and headset), I carried out the modifications
described by G3RXQ which increase the lower cut off frequency of the microphone
circuit on
12 matches
Mail list logo