I finally got my k2 #05233 completed and started the alignment process. I ran
into some issues and decided to go back and re-check the tests for phases I and
II. The tests during their construction were all ok and on the money. This time
when I got to the VCO alignment stage the following
Hi
I've worked my way through assembling my k2 and I've reached a problem:
Everything seems fine until the 4000 kHz, R30 - 6V alignment of L30. I
can only reach 5.65V. I have verified D23-26 are the right part, oriented
correctly. I have verified D21-22 are the right part and oriented
Robert,
Spread or squeeze the turns of T5 and see if the voltage increases by
that means - overshoot the 6 volts a little and do the final adjustment
with L30. If the problem persists, check the capacitor values in the
VFO Range Select area - see te schematic to identify the capacitors
3 matches
Mail list logo