Bill,
Do you mean that it transmits dashes until the dit side is released?
If so, check the dash spacing on your paddles (increase the spacing) and
clean the paddle contacts.
Also increase the spring tension on the dash side.
It sounds to me that somehow the contacts of the paddles may be
I am using a K2 pre-3000 SN model with all the upgrades to the new PWB
configuration installed. Software version is 2.04R. When sending an "L" by
pressing the dit side of the paddle continuously and touching the dash key
as the first dit is being sent, sometimes the rig transmits continuously
I have K2 #4650, which has worked flawlessly for about three months. I have
had several hundred QSOs, mainly CW, and have used all bands. I almost always
run 5 watts. Today, a weird phenomenon raised its head. On 17M, I finished a
QSO with an Italian station, and everything was working
Russ,
You might try replacing the antenna with a dummy load to
eliminate RF as the source.
John K7VV
On Apr 9, 2005 7:10 PM, Eberhart, Russell [EMAIL PROTECTED] wrote:
I have K2 #4650, which has worked flawlessly for about three months. I have
had several hundred QSOs, mainly CW,
4 matches
Mail list logo
